SFA Sanidouche, Sanishower, Sanipump Installation Guide
Model: D60
Standard: EN 12050-2
Electrical: 220-240 V - 50 Hz, 250 W - 1.3 A - IP44 - Class 1
Weight: 3.5 KG
Product Overview
The SFA Sanidouche, Sanishower, and Sanipump are designed for lifting wastewater from sanitary facilities. They are compact and efficient units suitable for various installations.
Key Features:
- Automatic activation and deactivation.
- Quiet operation.
- Multiple inlets for connecting various sanitary appliances.
- High-quality materials for durability.
Installation Diagrams and Instructions
The following diagrams illustrate the recommended installation procedures:
Diagram 1: General Installation Layout
Illustrates the basic setup for connecting sanitary appliances to the SFA unit. Shows correct and incorrect pipe routing.
Step 1: Connect the waste pipe from the sanitary appliance to the appropriate inlet on the SFA unit. Ensure correct pipe diameter (e.g., 40mm) and slope. Avoid sharp bends.
Step 2: Connect the discharge pipe to the SFA unit. Ensure the discharge pipe has a suitable diameter (e.g., 22/32mm or 32/40mm) and is routed correctly to the main sewage system.
Step 3: Verify the electrical connection is safe and according to local regulations.
Step 4: Check the maximum vertical and horizontal discharge distances. The unit can pump water up to 4 meters vertically and 40 meters horizontally (with a 1% slope). Note the maximum head and distance limitations indicated by percentage slopes.
Diagram 2: Installation Steps
Provides a step-by-step visual guide for assembling and connecting the unit.
Step 1: Prepare the inlets. For a 22mm pipe, use part C and clamp B. For a 32mm pipe, use part A and clamp C.
Step 2: Attach the discharge pipe using part F and D.
Step 3: Connect the discharge pipe to the unit using part F.
Step 4: Connect the 40mm discharge pipe using part E and clamp F.
Step 5: Connect the 32mm discharge pipe using part E and clamp F.
Step 6: Secure the unit using screws G and H.
Step 7: Ensure the unit is stable and properly positioned.
Step 8: Final check of all connections and ensure no leaks.
Diagram 3: Unit Dimensions and Technical Data
Shows the physical dimensions of the unit and important technical specifications.
Dimensions:
- Height: 214 mm
- Width: 356 mm
- Depth: 294 mm
- Overall height with connections: 144 mm
- Outlet height: 74 mm
- Inlet height: 150 mm
Performance Chart:
A chart shows the relationship between flow rate (L/min) and discharge head (meters). For example, at 50 L/min, the maximum head is approximately 2 meters. At 20 L/min, the maximum head is approximately 4 meters.
Slope Recommendations:
- Minimum slope for discharge pipe: 1% (1 cm per meter).
- Maximum vertical lift: 4 meters.
- Maximum horizontal run: 40 meters (with 1% slope).
Parts List
The following parts are included or required for installation:
- A: 1x Elbow connector
- B: 1x Clamp 25x40
- C: 2x Inlet connectors
- D: 1x Flexible hose
- E: 1x Discharge connector
- F: 3x Clamps 32x55
- G: 2x Mounting plates
- H: 2x Screws
Refer to the exploded view diagram for detailed part identification.
Exploded View Diagram
The exploded view diagram shows all internal and external components of the SFA unit, with corresponding part numbers for reference and replacement.
Key Components:
- 1: Tank
- 3: Motor and pump assembly
- 8: Inlet elbow
- 13: Filter
- 14: Non-return valve
- 17: Motor
- 21: Inlet pipe
- 24: Lid
- 26: Lid seal
- 28b: Discharge connector
- 31: Motor shaft
- 32: Tank base
- 39: Impeller
- 40: Motor support
- 41: Motor seal
- 48: Handle
- 50: Lid screws
- 54: Discharge flange
- 56: Tank screws
- 64: Inlet flange
Contact and Service Information
Service Helplines
France: TEL 0810 05 90 02 / FAX 03 44 94 46 19
United Kingdom: TEL 08457 650011 / FAX 020 8842 1671
Ireland: TEL 1850 23 24 25 / FAX +353 46 97 33 093
Australia: TEL +1300 554 779 / FAX +61.2.9882.6950
Germany: TEL 0800 82 27 82 0 / FAX (060 74) 30928-90
Italia: TEL 0382 6181 / FAX +39 0382 618200
España: TEL +34 93 544 60 76 / FAX +34 93 462 18 96
Portugal: TEL +35 21 911 27 85 / FAX +35 21 957 70 00
Suisse Schweiz Svizzera: TEL +41 (0)32 631 04 74 / FAX +41 (0)32 631 04 75
Benelux: TEL +31 475 487100 / FAX +31 475 486515
Sverige: TEL +46 (0)8-404 15 30
Norge: TEL +46 (0)8-404 15 30
Polska: TEL (+4822) 732 00 33 / FAX (+4822) 751 35 16
Česká Republika: TEL +420 266 712 855 / FAX +420 266 712 856
România: TEL +40 256 245 092 / FAX +40 256 245 029
Türkiye: TEL +90 212 275 30 88 / FAX +90 212 275 90 58
China: TEL +86(0)21 6218 8969 / FAX +86(0)21 6218 8970
Brazil: TEL +55 11 3262 2903
Russia: TEL (495) 258 29 51 / FAX (495) 258 29 51
For more service information, visit: www.sfa.fr
