Shokz OpenRun User Guide

Headphone Controls

LED Indicator: Located on the headphones.

Power/Volume + Button: Used for power, volume adjustment, and other functions.

Volume - Button: Used for volume adjustment and other functions.

USB-C Charging Port: For charging the headphones.

Multifunction Button: Used for playback control, calls, and other features.

ON/OFF

To turn on: Press and hold the Power/Volume + Button until the LED Indicator flashes blue. You will hear "Welcome to Shokz."

To turn off: Press and hold the Power/Volume + Button until the LED Indicator flashes red. You will hear "Power off."

Pairing

1. Ensure OpenRun is turned off.

2. Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately. You will hear "pairing."

3. Open your device's Bluetooth settings and select "OpenRun by Shokz." You will hear "connected."

How to Wear

Pick up the headphones, bring them behind the back of the base of your neck, position the earhooks on your ears, then enjoy your music!

Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.

Volume

Operate volume controls while audio is playing.

To change volume: While your audio is playing, adjust headphone volume by pushing either the Volume + or Volume - buttons.

A "beep" will sound when the volume is at its max.

Listening with headphones at high volume may affect your hearing and the audio will be distorted.

Multifunction Button

Play/pause music: Click once.

Next song: Double-click while music is playing.

Previous song: Triple-click while music is playing.

Answer call: Click once.

End call: Click once during a call.

Answer call waiting and end current call: Press and hold for 2 seconds when receiving a second call.

Ignore a call: Press and hold for 2 seconds during an incoming call.

Activate voice assistant: Press and hold for 2 seconds when the device is on standby.

Redial last number: Double-click on standby.

*Only applicable for phone calls, not online calls.

Check Battery Status

Operate controls while audio is not playing.

To check battery status: Click the Volume + or Volume - button while music is paused. Audrey will tell you the battery status: "Battery high/Battery medium/Battery low/Charge me."

EQ Modes

Standard Mode: Balanced frequency for listening to music.

Vocal Booster Mode: Enhanced intermediate frequencies for audiobooks, podcasts, etc.

Switching EQ Modes

Operate controls while music is playing.

To switch EQ mode: Press and hold both buttons (Power/Volume + Button and Volume – Button) while music is playing until you hear a beep. Audrey will say: "EQ changed."

Multipoint Pairing

Switch between two devices seamlessly with multipoint pairing.

To enable multipoint pairing:

1. Start with your headphones powered off.
2. Press and hold Volume + until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
3. Press and hold the multifunction button and Volume + button until Audrey says, "multipoint enabled."
4. Open first device's Bluetooth® menu and select "OpenRun by Shokz." Audrey will say, "connected."
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding Volume + until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
7. Open second device's Bluetooth® menu and select "OpenRun by Shokz." Audrey will say, "connected."
8. Turn your headphones off.
9. Turn your headphones on. Your headphones are now connected to both devices. You will hear a beep, then Audrey will say "Welcome to Shokz, connected. Second device connected."

Turn Multipoint Pairing Off

1. Start with your headphones powered off.
2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
3. Press and hold the multifunction button and Volume – button until Audrey will say, "Multipoint disabled."

Restore Factory Settings

1. Start with your headphones powered off.
2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
3. Press and hold the multifunction button, Volume – button and Volume + button until you hear two beeps and feel the vibration.
4. Turn your headphones off. OpenRun is now reset and can be re-paired to your device.

Changing Languages

Your headphones have four built-in languages: Chinese, English, Japanese and Korean.

1. Start with your headphones powered off.
2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
3. Double-press the multifunction button. Languages have been switched when you hear the corresponding language.

Charging Tips

The headset will automatically shut down when charging.

When the headphones are at low battery, there will be a "charge me" prompt and the red light will flash intermittently. Use the corresponding USB-C charging cable for charging.

The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator will turn from red to blue when charging is complete.

Warranty

Your headphones are covered by a warranty. Visit our website at https://shokz.com/pages/warranty-landing for details of the limited warranty.

*Failure to register will not affect your limited warranty rights.