Shokz OpenRun Wireless Bone Conduction Headphones User Guide

Earphone Operation Method

Diagram Description: The Shokz OpenRun headphones are shown with key components labeled. These include the LED Indicator, Power/Volume + Button, Volume - Button, USB-C Port, and the Multi-function Button.

Power On/Off

To power on the earphones, press and hold the Power/Volume + Button until the LED indicator lights up blue. You will hear the audio prompt "Welcome to Shokz."

To power off the earphones, press and hold the Power/Volume + Button until the LED indicator lights up red. You will hear the audio prompt "Goodbye."

Pairing

Follow these steps to pair your OpenRun headphones with a device:

1. Ensure the OpenRun is powered off.
2. Press and hold the Volume + Button until the LED indicator flashes red and blue alternately. You will hear the audio prompt "Pairing mode."
3. Open the Bluetooth settings on your device and select "OpenRun by Shokz."
4. You will hear the audio prompt "Connected."

Wearing Method

Diagram Description: A two-step illustration shows how to wear the headphones. Step 1: Place the headphones behind your neck. Step 2: Hook the ear hooks over your ears.

Ensure the transducers are positioned in front of your ears for optimal sound and comfort. Incorrect wearing may lead to improper use or discomfort.

Volume Control

Diagram Description: The headphone's control area is shown, highlighting the Power/Volume + Button and the Volume - Button.

To adjust the volume during audio playback or calls, press the Volume + Button or Volume - Button. The volume will increase or decrease accordingly. A beep sound indicates maximum volume.

⚠️ Warning: Listening at high volumes for extended periods may affect your hearing and cause audio distortion.

Multi-function Button

Diagram Description: The headphone is shown with the Multi-function Button highlighted.

The Multi-function Button controls various playback and call functions:

• Play/Pause Music: 1 click ▶️/⏸️
• Next Track: 2 clicks ⏩
• Previous Track: 3 clicks ⏪
• Answer/End Call: 1 click ?

Button Operation Summary

*Note: This applies to receiving phone calls, not online calls.

Check Battery Level

Diagram Description: The headphone's control area is shown, highlighting the Power/Volume + Button and the Volume - Button.

When audio is paused, press the Volume + or Volume - Button. The earphones will announce the battery status: "Battery is charging," "Battery is about half full," or "Battery is low/Please charge."

Equalizer Mode

Diagram Description: Two icons are presented. The first shows sound waves emanating from an ear, labeled "Standard Mode," described as "Balanced frequency settings for listening to music." The second shows a stylized mouth with sound waves, labeled "Vocal Mode," described as "Optimal for audiobooks, podcasts, etc. Optimized for hearing human voices."

Switching Equalizer Mode

Diagram Description: The headphone's control area is shown, highlighting the Power/Volume + Button and the Volume - Button.

To switch between "Standard Mode" and "Vocal Mode," press and hold both the Power/Volume + Button and the Volume - Button simultaneously during music playback until you hear a beep sound.

Multipoint Connection

Diagram Description: An illustration shows the Shokz OpenRun headphones wirelessly connected to both a laptop and a smartphone, indicated by Bluetooth symbols.

Pair two devices to enable seamless switching between them using Multipoint Connection.

Multipoint Connection Setup

Follow these steps to connect to two devices:

1. Turn off the OpenRun headphones.
2. Press and hold the Volume + Button until the LED indicator flashes red and blue alternately and you hear the audio prompt "Pairing mode."
3. Press and hold the Multi-function Button and the Volume + Button simultaneously until you hear the audio prompt "Starting Multipoint connection."
4. Turn on Bluetooth on your first device and select "OpenRun by Shokz." You will hear "Connected."
5. Turn off the earphones.
6. Repeat steps 2 and 3 to enter pairing mode again.
7. Turn on Bluetooth on your second device and select "OpenRun by Shokz." You will hear "Connected."
8. Turn off the earphones.
9. Turn on the earphones. They are now connected to both devices. You will hear "Welcome to Shokz. Connected."

Disconnecting Multipoint Connection

Diagram Description: The headphone's control area is shown, highlighting the Volume + Button and the Multi-function Button.

To disconnect Multipoint Connection:

1. Start with the earphones powered off.
2. Press and hold the Volume + Button until the LED indicator flashes red and blue alternately and you hear the audio prompt "Pairing mode."
3. Press and hold the Multi-function Button and the Volume - Button simultaneously until you hear the audio prompt "Multipoint connection ended."

Reset to Factory Settings

Diagram Description: The headphone's control area is shown, highlighting the Power/Volume + Button, Volume - Button, and Multi-function Button.

To reset your OpenRun headphones to factory settings:

1. Start with the earphones powered off.
2. Press and hold the Volume + Button until the LED indicator flashes red and blue alternately and you hear the audio prompt "Pairing mode."
3. Press and hold the Multi-function Button, Volume + Button, and Volume - Button simultaneously until you hear two beep sounds.
4. Turn off the earphones. Your OpenRun headphones are now reset and can be re-paired with your devices.

Language Switching

The earphones support four languages: English, Japanese, Korean, and Chinese.

Diagram Description: The headphone's control area is shown, highlighting the LED Indicator and the Multi-function Button.

1. Start with the earphones powered off.
2. Press and hold the Volume + Button until the LED indicator flashes red and blue alternately and you hear the audio prompt "Pairing mode."
3. Double-click the Multi-function Button. The language will switch.

Charging Method

Diagram Description: The headphone is shown connected via its USB-C port. Two states are illustrated: "Charging" (LED red) and "Charging Complete" (LED blue).

When the battery is low, you will hear the audio prompt "Please charge," and the red light will flash intermittently. Use the provided USB-C charging cable to charge the earphones.

During charging, the LED indicator will turn red. The earphones will automatically power off. Once charging is complete, the LED indicator will change from red to blue.

Product Warranty

Your purchased earphones come with a 2-year product warranty. For details, please visit our website at https://jp.shokz.com/pages/warranty-policy.