DJI Power Expansion Battery 2000 User Guide

Disclaimer

By using this product, you signify that you have read, understand, and accept the terms and conditions of this guideline and all instructions at https://www.dji.com/power-expansion-battery-2000. EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE AT HTTPS://WWW.DJI.COM/SERVICE/POLICY, THE PRODUCT AND ALL MATERIALS AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE PROVIDED "AS IS" AND ON "AS AVAILABLE BASIS" WITHOUT WARRANTY OR CONDITION OF ANY KIND. This product is not intended for children.

Usage

The DJI Power Expansion Battery 2000 can be connected to the power station to expand the battery capacity.

Connecting the Expansion Battery

Figure A: Checking Battery Level

Press the power button once to check the remaining battery level.

Figure B1: Connecting to Power Station

Make sure the power station is updated to the latest firmware. Power off the device and disconnect the power supply. Use the included expansion battery cable to connect Port 1 of the expansion battery to the SDC port of the power station. Press and hold the power button of the power station. The expansion battery will power on when 'Eb-1' appears on the display screen of the power station.

Figure B2: Connecting Multiple Expansion Batteries

The power station supports connecting multiple expansion batteries:

1. Connect Port 1 of the expansion battery to the SDC port of the power station, or to Port 2 of the previous expansion battery.
2. Connect Port 2 of the expansion battery to Port 1 of the next expansion battery.

• Users can link the power station to the DJI Home app and view the device information or modify settings in the app.
• DO NOT use the DJI Power SDC Fast Charge Cable to directly connect the expansion battery to the Intelligent Flight Battery of the aircraft.
• DO NOT touch the metal terminals on the ports. When powered off, clean the metal terminals with a clean, dry cloth if there is any noticeable build up.
• Place the device on a flat and stable surface when in use. Make sure the device is properly insulated to prevent fire hazards. DO NOT block the heat dissipation vents of the device.

Specifications

Compliance Information

This device complies with relevant EU and UK regulations. For full details and declarations of conformity, please visit www.dji.com/euro-compliance.

The product is subject to WEEE directives for proper disposal. Please refer to local recycling guidelines.