CHIPHY Athena LED Smart Tray Floor Lamp
Model: F1004 | Item No.: RF04-001
Product Features
- APP Remote Control: Control the switch from anywhere via smartphone and network.
- Voice Control: Compatible with Alexa and Google Home for hands-free operation.
- Timing/Countdown/Schedule: Set custom operating schedules.
- Touch Panel Operation: Intuitive controls for brightness, power, and special modes.
Touch Panel Controls
- UP Button:
- Single press: Increase brightness (10 levels).
- Long press: Maximize brightness (100%).
- DOWN Button:
- Single press: Decrease brightness (10 levels).
- Long press: Minimize brightness (1%).
- ON/OFF Button:
- Single press: Turn the light on or off.
- Long press (when light is off): Enter night light mode.
- Double click (when light is on): Enter 1-minute countdown.
- Long press (when light is on): Enter 45-minute countdown.
Switch Indicator: Press the indicator button to toggle the indicator light on/off.
Technical Specifications
| Specification | Details |
|---|---|
| Model | F1004 |
| Item No. | RF04-001 |
| Dimensions | D11.8*H69.3 inch |
| Material | Aluminum/Steel/PC |
| Power | 40W |
| Voltage | 100-240V |
| Frequency | 50/60Hz |
| Luminous Flux | 3000lm |
| Color Correlated Temperature (CCT) | 4000K |
| Color Rendering Index (CRI) | Ra≥95 |
| Lifespan | 50000h |
Parts Identification
- Part A (x1): Base pole section
- Part B (x1): Middle pole section
- Part C (x1): Upper pole section
- Part D (x1): Lamp head pole section
- Part E (x1): Base
- Part F (x1): Tray
- Part G (x1): Power adapter
- Part H (x1): Lamp head assembly
- Part I (x1): Smart plug
Assembly Instructions
The CHIPHY Athena LED Smart Tray floor lamp can be assembled using the following steps:
- Connect Pole Sections: Screw together the pole sections (A, B, C, D) to achieve the desired lamp height. The diagrams show threaded connections between sections.
- Connect Power Adapter: Attach the power adapter (G) to the internal wiring of the lamp.
- Route Power Cord: Carefully feed the power cord through the assembled pole sections, ensuring it is not pinched.
- Attach Lamp Head Pole: Connect the lamp head pole section (D) to the top of the assembled pole structure.
- Attach Base: Connect the base (E) to the bottom of the pole assembly (A). Ensure the power cord exits the base correctly.
- Attach Tray: Secure the tray (F) to the pole assembly, typically near the lamp head.
- Connect Lamp Head Assembly: Attach the lamp head assembly (H) to the top of the lamp head pole section (D).
- Final Assembly: The lamp is now assembled. Connect the smart plug (I) to the power adapter and plug into a wall outlet. The lamp can be adjusted to heights of 22", 38", 54", or 69" by using different combinations of pole sections. A warning is noted regarding careful assembly, potentially "No turning" excessively on certain connections.
