CHIPHY Athena Remote Timer LED Floor Lamp

User Manual

Product Overview

The CHIPHY Athena is a remote-controlled LED floor lamp with a timer function, designed for versatile lighting needs. It offers adjustable brightness and color temperature, making it suitable for various environments.

Specifications

Model	Item No.	Dimensions	Material	Power	Volt	Frequency	Luminous flux	CCT	CRI	Lifespan
F1006	RF06-002	D9.5*H85 inch	Aluminum/Steel/PC	60W	100-240V	50/60Hz	6000lm	2300K-6500K	Ra≥90	50000h

Assembly Instructions

Follow these steps to assemble the floor lamp:

Step 1: Connect pole sections. Insert the threaded end of section C into the top of section D, and then screw section D onto the base (A).
Step 2: Connect the power cord. Ensure the connector is securely attached to the corresponding part on the lamp pole.
Step 3: Attach the lamp head. Connect the lamp head assembly to the top pole section.
Step 4: Complete assembly. Attach the remaining pole sections (D) and the lamp head (C) to the base (A).
Step 5: Adjust height. Insert pole sections (D) into the base (E) and then into each other to achieve desired height options (22", 38", 54", 69", 85").
Step 6: Final connection. Connect the lamp head (C) to the assembled pole sections (D) and attach to the base (A). Ensure the power cord (B) is connected.

Exploded View Diagram Description: The diagram shows the different parts labeled A through F, illustrating how they connect to form the complete lamp. Part A is the base, D represents pole sections, C is the lamp head, and E is another base component. Parts B and F are connectors and the remote control respectively.

Height Options Diagram Description: This visual guide shows the lamp at five different height settings: 22 inches, 38 inches, 54 inches, 69 inches, and 85 inches, achieved by varying the number of pole sections used.

Key Function Description

Touch Panel Functions (Memory Function)

UP: Short-press for brightness up (10 levels). Long-press for maximum brightness.
DOWN: Short-press for brightness down (10 levels). Long-press for minimum brightness.
ON/OFF: Short-press to turn the lamp on or off. Long-press (when light is off) to enter night light mode. Long-press (when light is on) to turn off in 45 minutes. Double-press to turn off in 1 minute.
Timing Indicator: Shows the timer status. Red light indicates 4 hours, Green light indicates 8 hours, Blue light indicates 12 hours. No light means no timer is active.
Switch Indicator: Light on/off status indicator.

Key Function Introduction

Brightness Control: Short-press UP/DOWN for 10 levels of brightness adjustment. Long-press UP for maximum brightness, long-press DOWN for minimum brightness.
Color Temperature Control: Double-click UP to increase color temperature (10 levels, up to 6500K). Double-click DOWN to decrease color temperature (10 levels, down to 2300K).
Power Control: Short-press ON/OFF to toggle power. Long-press ON/OFF (when off) activates night light. Long-press ON/OFF (when on) sets a 45-minute timer. Double-press ON/OFF sets a 1-minute timer.

Timing Function

To set the timer, short-press the timing button with two fingers. Select the desired timing mode: Red (4h), Green (8h), Blue (12h), or None (no timer).
The corresponding indicator light will illuminate once the timer is set.
The timer will repeat daily unless cancelled.

Cancel Timing

Press the "A ✔" button with both fingers simultaneously to switch the timing indicator to none, cancelling the timer.
Alternatively, cancel the timing via the remote control or by disconnecting the lamp's power supply.

Remote Control Functions

Remote Control Diagram Description: The remote control has buttons for ON/OFF, Brightness Up/Down, Color Temperature Up/Down, Timer functions, and specific timing options (4h, 8h, 12h). It also includes buttons for "OFF IN 45 MINUTES" and "OFF IN 1 MINUTE". The diagram shows the remote should be pointed directly at the control panel.

ON/OFF: Turns the lamp on or off.
BRIGHTNESS +/-: Adjusts brightness in 10 levels. Long-press for maximum/minimum brightness.
COLOR TEMPERATURE +/-: Adjusts color temperature in 10 levels (2300K to 6500K).
TIMER: Sets the timer function.
Specific Timer Buttons: Buttons for 4h, 8h, and 12h timer settings.
OFF IN 45 MINUTES / OFF IN 1 MINUTE: Buttons to set specific turn-off times.
CANCEL TIMING: Cancels the active timer setting.

Important Information

Warning: No turning - Ensure the lamp is stable and does not tip over, especially when adjusting height or in areas with potential disturbances.

Designed and made by Chiphy

For support, contact: support@chiphylighting.com

Visit us online: www.chiphylighting.com

	CHIPHY Athena RF1004 LED Tray Floor Lamp Installation Manual Detailed installation guide for the CHIPHY Athena RF1004 LED Tray Floor Lamp. Learn how to assemble the pole sections, attach the lamp head, and connect the power cord for this adjustable height floor lamp.
	Chiphy Sophia LED Magic Color Floor Lamp: Assembly, App, and Remote Control Guide Detailed manual for the Chiphy Sophia LED Magic Color Floor Lamp (Model F1013). Includes assembly instructions, app setup (Smart Life), Alexa integration, touch and remote control functions, and technical specifications.
	CHIPHY Athena LED Smart Tray Floor Lamp User Manual Comprehensive user manual for the CHIPHY Athena LED Smart Tray Floor Lamp (Model F1004, RF04-001), detailing its smart features, touch panel operation, technical specifications, and assembly guide.
	CHIPHY Athena RD1001 LED Desk Lamp Installation and Operation Manual Detailed installation and operation guide for the CHIPHY Athena RD1001 LED Desk Lamp, featuring specifications, control panel functions, and assembly instructions.
	Remote Controller User Manual User manual for a remote controller, detailing points for attention, binding and unbinding procedures, and various operating modes like white light, colorful static, colorful dynamic, and countdown timers. Includes a key description of the remote's functions.
	Chiphy T1006 LED Magic Color Mini Table Lamp User Manual Comprehensive guide for the Chiphy T1006 LED Magic Color Mini Table Lamp, covering app installation, Alexa integration, touch controls, and product specifications. Learn how to set up and operate your smart lamp.