STORKLINTA 5-Drawer Chest
Safety Warnings
⚠️ Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- DO NOT defeat or remove the drawer interlock system; it is an important stability and safety system.
- Place heaviest items in the lowest drawers.
Tools and Hardware
Tools required:
- Screwdrivers (Phillips and flathead) [screwdriver]
- Hammer [hammer]
- Drill [drill]
- Pencil
Hardware included (examples):
- Screws: Ø 5/16" (8 mm), Ø 1/8" (3 mm)
- Wall plugs
Parts List
Key components and their identifiers:
| Part ID | Description | Quantity |
|---|---|---|
| 118331 | Dowel | 12x + 20x |
| 119252 | Cam lock | 12x |
| 101345 | Dowel | 12x + 4x |
| 120076 | Cam lock | 40x |
| 10094763 | Pin | 4x |
| 10094727 | Cam bolt | 4x |
| 10093081 | Cam lock part | 4x |
| 10093082 | Cam lock part | 4x |
| 158568 | Side panel | 2x |
| 10101849 | Bracket | 2x |
| 102553 | Bracket | 2x |
| 145718 | Pin | 20x |
| 105248 | Screw | 4x |
| 146114 | Screw | 30x + 20x + 6x |
| 109572 | Screw | 1x + 1x + 1x + 1x |
| 10087223 | Wall plug | 2x |
| 109049 | Screw | 1x |
| 100823 | Screw | 1x + 1x |
| 10102070 | Anti-tip bracket | 1x |
| 106989 | Anti-tip bracket | 1x |
Assembly Instructions
Step 1
Attach drawer runners to the side panels.
Parts used: 12x Dowels (118331), 12x Cam locks (119252), 12x Dowels (101345), 2x Bracket (102553), 4x Screw (105248), 30x Screw (146114).
Visual: Shows two side panels with pre-drilled holes. Dowels are inserted into holes. Cam locks are inserted into larger holes. Brackets are attached to the side panels using screws. Drawer runner components are shown being attached to the side panels.
Step 2
Assemble drawer sides and back panels.
Parts used: 4x Pins (10094763), 4x Cam bolts (10094727), 4x Cam lock parts (10093081), 4x Cam lock parts (10093082), 2x Bracket (10101849), 2x Side panel (158568).
Visual: Shows drawer side panels and back panels being connected using pins and cam lock parts. Brackets are attached to the side panels.
Step 3
Assemble drawer bases.
Parts used: 40x Cam locks (120076), 20x Dowels (118331), 30x Screws (146114), 20x Pins (145718), 20x Dowels (101345).
Visual: Shows drawer base panels being assembled with cam locks and dowels. Pins are inserted into holes.
Step 4
Attach anti-tip hardware to the furniture frame.
Parts used: 1x Screw (100823), 1x Screw (109049), 1x Anti-tip bracket (106989).
Visual: Shows an anti-tip bracket being attached to the top rear of the furniture frame using screws.
Step 5
Insert dowels into drawer base panels.
Parts used: 8x Dowels (101345).
Visual: Shows dowels being inserted into the edges of drawer base panels.
Step 6
Attach side panels to the base panel.
Visual: Shows side panels being attached to a base panel, with screws being inserted from the outside.
Step 7
Attach internal vertical dividers.
Visual: Shows internal vertical panels being inserted and attached to the base and side panels.
Step 8
Secure internal vertical dividers using cam locks.
Parts used: 4x Cam locks (119252).
Visual: Shows cam locks being inserted and rotated to secure the internal vertical dividers to the frame.
Step 9
Attach the top panel.
Visual: Shows the top panel being placed onto the assembled frame and secured.
Step 10
Insert cam locks into the top panel.
Parts used: 4x Cam locks (119252).
Visual: Shows cam locks being inserted into the underside of the top panel.
Step 11
Attach wall mounting brackets to the top panel.
Parts used: 2x Bracket (102553), 4x Screw (105248).
Visual: Shows wall mounting brackets being attached to the top panel using screws.
Step 12
Attach side panels to the main frame.
Parts used: 2x Screw (105248).
Visual: Shows side panels being attached to the main frame using screws.
Step 13
Attach drawer handles.
Parts used: 2x Handle (158568), 2x Screw (10101849).
Visual: Shows drawer handles being attached to the drawer fronts using screws.
Step 14
Slide in the back panel.
Visual: Shows a back panel being slid into grooves on the assembled frame.
Step 15
Secure the back panel.
Parts used: 4x Pin (10094727), 4x Screw (10094763).
Visual: Shows pins and screws being used to secure the back panel to the frame.
Step 16
Attach drawer runners to the cabinet interior.
Parts used: 4x Dowels (101345).
Visual: Shows drawer runners being attached to the inside of the cabinet frame using dowels.
Step 17
Attach drawer runners to the drawer sides.
Parts used: 4x Dowels (118331).
Visual: Shows drawer runners being attached to the sides of the drawer boxes using dowels.
Step 18
Attach the top cover panel.
Visual: Shows a top cover panel being attached to the top of the cabinet.
Step 19
Secure the top cover panel using cam locks.
Parts used: 4x Cam locks (119252).
Visual: Shows cam locks being inserted and rotated to secure the top cover panel.
Step 20
Attach drawer front runners.
Parts used: 4x Cam lock parts (10093081), 4x Cam lock parts (10093082).
Visual: Shows cam lock parts being attached to the drawer fronts.
Step 21
Attach the anti-tip device to the furniture.
Visual: Shows the anti-tip device components being attached to the furniture frame.
Step 22
Adjust anti-tip bracket alignment.
Visual: Shows fine adjustments being made to the anti-tip bracket.
Step 23
Attach the furniture to the wall using the anti-tip device.
Visual: Shows the furniture being secured to the wall using the anti-tip bracket and screws.
Step 24
Wall anchoring instructions.
The screw(s) and plug(s) supplied can be used with most solid (A) and hollow (B) walls. For solid wood (C) use the screw(s) without plug(s). If you are uncertain, seek professional advice.
Visual A (Solid wall): Shows drilling a hole Ø 5/16" (8 mm) and inserting a wall plug, then screwing into it. Depth ≈ 2 3/4" (70 mm).
Visual B (Hollow wall): Shows drilling a hole Ø 5/16" (8 mm) and inserting a wall plug, then screwing into it. Depth ≈ 1 1/4" (≈ 30 mm).
Visual C (Solid wood): Shows drilling a hole Ø 1/8" (3 mm) and screwing directly into the wood. Depth ≈ 1 1/4" (≈ 30 mm).
Link: www.IKEA.com/secure-it
Step 25
Attach anti-tip device to the furniture.
Parts used: 1x Screw (109572).
Visual: Shows the anti-tip device being attached to the furniture frame with a screw.
Step 26
Secure anti-tip device to the wall.
Parts used: 1x Screw (109572), 1x Screw (100823).
Visual: Shows the anti-tip device being secured to the wall with screws.
Step 27
Assemble drawer box components.
Parts used: 4x Dowels (118331).
Visual: Shows drawer side panels and base being assembled with dowels.
Step 28
Assemble drawer box components.
Parts used: 4x Dowels (101345).
Visual: Shows drawer side panels and base being assembled with dowels.
Step 29
Attach drawer front panel.
Visual: Shows the drawer front panel being attached to the assembled drawer box.
Step 30
Secure drawer box with cam locks.
Parts used: 4x Cam locks (120076).
Visual: Shows cam locks being inserted and rotated to secure the drawer box.
Step 31
Insert back panel into drawer box.
Visual: Shows the back panel being slid into the drawer box.
Step 32
Attach drawer top panel.
Visual: Shows the top panel of the drawer box being attached.
Step 33
Secure drawer top panel with cam locks.
Parts used: 4x Pins (145718), 4x Cam locks (120076).
Visual: Shows pins and cam locks being used to secure the drawer top panel.
Step 34
Insert drawer into the chest frame.
Parts used: 6x Screw (146114).
Visual: Shows a drawer being inserted into the chest frame, with screws being used to attach runners.
Step 35
Warning regarding drawer loading.
Visual: Shows a drawer being pulled out, with a warning icon indicating not to overload or tip.
Step 36
Final drawer insertion.
Visual: Shows a drawer being fully inserted into the chest.
