Sygonix Outdoor Garden Power Outlet, IP44

1. Intended Use

This product is a 4-way power outlet with a protective cover. The housing meets IP44 ingress protection standards, making it splash-proof and suitable for outdoor use. Do not submerge in water. Using the product for purposes other than those described may damage it. Improper use can lead to short circuits, fire, electric shock, or other hazards. The product complies with statutory national and European requirements. For safety and approval, do not rebuild or modify the product. Read these instructions carefully and keep them safe. Pass the product on to third parties only with these instructions.

All company names and product designations are trademarks of their respective owners. All rights reserved.

2. Delivery Contents

• Product
• 4 x Screws
• 4 x Dowels
• Operating Instructions

3. Latest Product Information

Download the latest product information at www.conrad.com/downloads or scan the QR code. Follow the instructions on the website.

4. Symbol Explanation

• ⚠️ This symbol warns of hazards that can lead to personal injury. Read the operating instructions carefully before first use.
• ⚡ This symbol warns of dangerous voltage that can lead to personal injury by electric shock. Only for vertical use.
• ℹ️ Read the operating instructions carefully.
• ⬆️ Only for vertical use.

5. Safety Instructions

Read the operating instructions carefully and pay special attention to the safety information. Failure to observe the safety instructions and information for proper use will result in no liability for resulting personal injury or property damage. Warranty/guarantee will be voided in such cases.

5.1 Read First!

5.2 General

• The product is not a toy. Keep it out of reach of children and pets.
• Do not leave packaging material lying around carelessly, as it could become a dangerous toy for children.
• If you have questions not answered by this document, contact technical support or other qualified personnel.
• Maintenance, adjustments, and repairs must only be carried out by a specialist or authorized repair center.

5.3 Handling

Handle the product with care. Jolts, impacts, or falls from even a low height can damage the product.

5.4 Operating Environment

• Do not subject the product to mechanical stress.
• Protect the product from extreme temperatures, strong jolts, flammable gases, vapors, and solvents.

5.5 Operation

• Consult an expert if you have doubts about the operation, safety, or connection of the product.
• If safe operation is no longer possible, take the product out of service and protect it from accidental use. DO NOT attempt to repair the product yourself. Safe operation is no longer guaranteed if the product:
  • shows visible damage,
  • no longer functions properly,
  • has been stored for extended periods under unfavorable ambient conditions, or
  • has been subjected to significant transport stress.

5.6 Electrical Installation

WARNING! Safety Hazard! Installation and connection of this product must only be performed by individuals with relevant knowledge and practical experience in electrical installations! Improper installation risks your own life, the life of the user of the electrical device, considerable property damage (e.g., fire), and personal liability for personal injury and material damage. Always consult an electrician!

Required specialist knowledge for installation includes:

• Adherence to the "Five safety rules": Disconnect from power supply; secure against accidental re-switching; verify absence of voltage; earth and short-circuit; cover or shield adjacent live parts.
• Use of suitable tools, measuring devices, and personal protective equipment where necessary.
• Analysis of measurement results.
• Use of electrical installation materials to ensure safe disconnection from the power supply.
• Understanding of IP protection ratings.
• Installation of electrical installation materials.
• Knowledge of the power supply type (TN, IT, TT systems) and corresponding connection conditions (classic earthing, protective earthing, necessary additional measures, etc.).

If you lack sufficient knowledge in any of the above areas, refrain from assembly and independent connection, and hire a professional.

5.7 Product

• Do not connect the product in series!
• Do not operate the product when covered.
• Exercise special caution in the presence of children. Children may not recognize the dangers associated with the incorrect use of electrical devices. There is a risk of life-threatening electric shock!

Important: The product housing meets IP44 ingress protection standards. It is splash-proof and suitable for outdoor use. Do not submerge in water.

5.8 Sockets

The product is equipped with enhanced protection against accidental contact. The integrated mechanism releases the socket openings only when both prongs of a power plug are inserted simultaneously into both openings.

5.9 Drilling

⚠️ When penetrating a surface (e.g., drilling or inserting fasteners), ensure no cables or pipes are damaged. Inadvertently drilling into electric cables can lead to a life-threatening electric shock! Check for concealed wires and pipes before drilling or inserting fasteners.

6. Installation Tools

The following tools are required for installation:

• Drill with 6 mm bit
• Screwdriver
• Ruler or bracket

7. Installation

Important: Safe installation requires specialist knowledge. Installation must be carried out by a specialist familiar with the electrical and mechanical installation requirements of the product. Install the product only vertically.

Step A: Mounting Bracket

Remove the mounting bracket.

Step B: Marking and Drilling

Switch the power supply to the product OFF. Use a ruler or the bracket to mark where to drill. Measurements indicated: 7 mm, 40 mm, 80 mm, 35 mm.

Step C: Wall/Surface Mounting

Attach the mounting bracket to the wall or surface using appropriate fasteners.

Step D1: Cable Preparation

Prepare the power cable for connection.

Step D2: Connecting to Power Source

Connect the outlet unit to the power source.

Step E: Securing the Unit

Secure the outlet unit.

Step F: Attaching to Bracket

Attach the outlet unit to the mounted bracket.

Step G: Final Check and Power On

After installation is complete, switch the power supply ON.

8. Cleaning and Care

Important: Do not use aggressive cleaning agents, rubbing alcohol, or other chemical solutions, as they can damage the housing and cause malfunctions. Do not immerse the product in water.

1. Switch the power supply to the product OFF.
2. Clean the product with a dry, lint-free cloth.

9. Disposal

♻️ This symbol indicates that the device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of Waste from Electrical and Electronic Equipment (WEEE) must dispose of it separately. End-users must remove batteries, accumulators, and lamps that can be removed non-destructively before handing over to a collection point.

Distributors are legally obliged to provide free take-back of old equipment. Conrad offers return options via Conrad stores, collection points, or public waste management facilities. End-users are responsible for deleting personal data from disposed equipment. Different obligations may apply in countries outside Germany.

10. Technical Data

10.1 Power Supply

• Rated Voltage: 230 V/AC, 50 Hz
• Connected Load / Current: max. 3680 W / 16 A
• Housing Material: Aluminium
• Ingress Protection: IP44
• Protection Class: I
• Number of Sockets: 4
• Cable Type: H05VV-F 3G 1.5 mm² (open wire)
• External Connection Cable: H07RN-F 3G 1.5 mm² (not included)
• Enhanced Protection Against Accidental Contact: Yes

10.2 Environment

• Operating / Storage Temperature: -20 to +40 °C

10.3 Other

• Dimensions (W x H x D): 140 x 248 x 70 mm
• Weight: 895 g