Sygonix SY-PS-400 Smart Wi-Fi Socket Strip with 4 USB Charging Ports

Intended Use

The Sygonix SY-PS-400 is a smart Wi-Fi socket strip designed to function as a power outlet. It features a push button to control the power supply to connected devices. The product includes three standard power sockets, four USB-A charging ports, and over-voltage protection. It can be controlled remotely via a dedicated mobile app, allowing for master on/off, individual socket control, USB port control, countdown timers, scheduling, power metering, and voice control.

This product is intended for connection to a standard grounded mains socket. It is designed for indoor use only and must be kept away from water, high humidity, and areas where these conditions may occur (e.g., bathrooms). For safety and approval reasons, the product must not be modified or rebuilt. Improper use can lead to hazards such as short circuits, fires, or electric shocks.

Delivery Content

• Wi-Fi power strip
• Warning labels
• Operating instructions

Up-to-date operating instructions can be downloaded from www.conrad.com/downloads by scanning the provided QR code.

Explanation of Symbols

❗ The symbol with a lightning bolt in a triangle indicates a risk to your health, such as electric shock.

❗ The symbol with an exclamation mark in a triangle highlights important information within these operating instructions. Always read this information carefully.

The arrow symbol indicates special information and advice for operation.

Safety Instructions

General Safety

• Unauthorized conversion or modification of the product is prohibited for safety and approval reasons. Do not open or disassemble the device.
• The product is designed according to protection class I. Use only a standard grounded mains socket as a power source. The socket must be easily accessible.
• This product is not a toy and must be kept out of reach of children.
• The product features a child safety lock. However, exercise caution when children are present, as they may not recognize the dangers of electrical devices, posing a risk of electric shock.
• Do not leave packaging material carelessly accessible to children.
• Handle the product with care; impacts, blows, or falls can cause damage.
• For questions not covered in this manual, contact technical support or a qualified specialist.

Connected Devices

Observe the safety and operating instructions of any devices connected to the product.

Mains Cable

• Completely unwind the mains cable when using the power strip.
• Lay the cable to prevent tripping hazards.
• Ensure the cable is not squeezed, bent, damaged by sharp edges, or subjected to mechanical stress.
• Avoid excessive thermal stress on the cable from extreme heat or cold.
• Do not modify the mains cable, as damage can lead to a fatal electric shock.
• Never use the product if the mains cable is damaged.
• If the cable is damaged, do not touch it. De-energize the socket first and then carefully unplug the product.
• A damaged mains cable must only be replaced by the manufacturer, an authorized workshop, or a similarly qualified person.

Operating Location

• Use only in dry, enclosed indoor areas. Keep away from moisture and wetness.
• Never place the product near bathtubs, showers, bathrooms, or swimming pools due to the risk of fatal electric shock.
• Avoid extreme temperatures, direct sunlight, and strong vibrations.
• Keep away from strong magnetic fields (e.g., near machines, electric motors, loudspeakers).
• Do not operate in environments with high dust, flammable gases, vapors, or solvents, as there is a risk of fire and explosion.
• The device may warm up during use; do not place it on sensitive surfaces.
• Do not use in hospitals or medical institutions, as radio waves may interfere with medical equipment.

Handling and Use

• Never plug in, unplug, or operate the product with damp or wet hands. This poses a risk of life-threatening electric shock.
• Do not connect the product to power immediately after moving it from a cold to a warm environment to prevent condensation damage and electric shock. Allow it to reach room temperature first.
• Always pull the mains plug by its gripping surface, never by the cable.
• Do not overload the product; observe the maximum permissible connected load.
• Do not connect devices in series, as this can lead to overload and fire risk.
• Do not operate the product when covered, as this can lead to overheating and fire.
• Disconnect the product from the mains socket during thunderstorms for safety.
• The product is voltage-free only when unplugged.
• Do not use if damaged, as this poses a risk of life-threatening electric shock. Dispose of it environmentally. Safe operation is not guaranteed if the product shows visible damage, malfunctions, was stored under unfavorable conditions, or suffered heavy transport stress.
• Never pour liquids over or near the product. If liquid enters the device, immediately switch off the power to the socket, unplug the product, and contact a specialist. Do not use the product further.
• Always unplug the product from the mains socket before cleaning or long-term storage.
• Use only in temperate climates.

Control Elements

The product features the following control elements:

• 1: 4x USB charging ports
• 2: Socket (switch 1)
• 3: Socket (switch 2)
• 4: Socket (switch 3)
• 5: Power button
• 6: Power cable with plug
• 7: Socket status lights
• 8: Openings for wall mounting

Diagram Description: A linear arrangement of sockets and ports, with a power button and status lights. The power cable extends from one end.

Connection

1. Connect the power plug (6) to a standard grounded mains socket.
2. Plug your devices into the available sockets (2, 3, 4) or USB ports (1).

Operation

Power Button Status Indicator Light

Power On

Press the power button (5) to turn the power strip on or off. The status indicator light (5) and socket status lights (7) will illuminate to show that power is being supplied to connected loads.

Socket Control

Individual sockets can be turned on or off remotely. Refer to the accompanying app manual for detailed control instructions.

USB Charging Ports

The four USB charging ports are exclusively for powering devices connected via USB cable (e.g., charging mobile devices) and do not support data transfer. All four ports can be remotely turned on or off via the app.

Over Current Protection

If the total current drawn by the connected loads exceeds the maximum permissible current (refer to "Technical Data"), the power strip will automatically shut off. To restart:

1. Remove the loads causing the total current to exceed the limit.
2. Press the power button (5) to turn the power strip back on.

Reset Device

If the device malfunctions, a reset may be necessary:

1. Turn off the power strip and disconnect all connected loads.
2. Disconnect the device from the mains power supply and wait 10 seconds before reconnecting.
3. Press and hold the power button for more than 5 seconds. Release it when the indicator light begins to blink rapidly (approximately twice per second).

Maintenance and Cleaning

The product requires no maintenance. Do not open or disassemble it. Any maintenance or repair work must be performed by a qualified specialist.

Before cleaning, turn off the product and disconnect it from the power supply. Disconnect any connected loads.

Use a clean, dry, soft cloth for cleaning. Dust can be easily removed with a soft brush and a vacuum cleaner.

Do not use aggressive chemical or abrasive cleaning agents, as they may cause discoloration or material changes to the surface.

Declaration of Conformity (DOC)

Conrad Electronic SE declares that this product complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.conrad.com/downloads.

Disposal

This symbol (WEEE symbol) indicates that electrical and electronic equipment must not be disposed of as unsorted municipal waste at the end of its service life. Users must dispose of waste electrical and electronic equipment separately. End-users are responsible for removing batteries and lamps that can be removed without damaging the equipment before handing it over to a collection point. Distributors are legally obliged to provide free take-back of waste equipment. For details on return options, visit the Conrad website.

Technical Data