Sygonix SY-PS-400 Smart Wi-Fi Socket Strip

Introduction

The connected device operates via a Wi-Fi network in conjunction with the "Smart Life - Smart Living" app. This mobile application enables you to control, manage, and receive alerts for devices connected to your network.

General Information

Important Information

Conrad Connect

[Conrad Connect Logo] CONRAD CONNECT

Your product is compatible with the Conrad Connect IoT platform and is powered by Tuya. Device integration with Conrad Connect requires a Conrad Connect Account. You can set up an account at the following URL: www.conradconnect.com

Legal Notice

This publication is by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights, including translation, are reserved. Reproduction by any method, such as photocopy, microfilming, or capture in electronic data processing systems, requires prior written approval from the editor. Reprinting, even in part, is prohibited. This publication represents the technical status at the time of printing. Copyright 2020 by Conrad Electronic SE.

Requirements

Security

It is strongly recommended to set up your Wi-Fi Router/Wi-Fi Access Point (AP) to use the most secure encryption option it supports.

App to Device Connection

• To add a new device to the app, the mobile device running the app and the smart device must be connected to the same Wi-Fi network.
• You can control the smart device through the app via Wi-Fi or using mobile device data.

Safety

Mobile App

Getting Started

First-time users should follow these steps:

1. Download and Install the App.
2. Create a User Account.
3. Log In.
4. Add Device.

Download and Install the App

App Installation

Apps are available for Android and iOS mobile devices. Visit the respective app store and search for "Smart Life - Smart Living", or scan the QR code shown here.

User Account

Your account settings are stored in the cloud.

Create a User Account

A user account is required for you to operate the device.

1. Select Register to create an account.
2. Log In.
3. You will then be taken to the "Home Page".

Home Page

The home page lists all devices that are under your account's control. When you log in for the first time, the device list will be blank.

UI Elements:

• A1: Access to "Home Management" settings, where you can name a home, set the home location on a map, and assign/add new devices to each room.
• A2: Enter a room to view or add devices.
• A3: View all devices at once.
• A4 / A14: Adds a new device.
• A5: Return to "Home Page" view.
• A6: Access "Tap-to-Run" and "Automation".
• A7: Access your profile and settings.
• A8: Manage your rooms and assigned devices.
• A9: Remove one or all devices.
• A10: Switch between list and grid view.
• A11: Access submenus (see items A8, A9, and A10).
• A12: Displays location information such as current temperature, humidity, air pressure, and wind speed.
• A13: Voice control [Microphone Icon].

Swipe down from the top of the screen to refresh the page.

Add Device

Familiarize yourself with the product before setting it up. Refer to the product operating instructions for further information.

1. Connect your mobile device to a Wi-Fi network.
2. Add a device by selecting "Add Device" or the [Add Device Icon] icon.
3. Select "Electrician" → "Socket (Wi-Fi)".
4. Follow the onscreen instructions to complete the setup process.

Overview

The overview screen displays controls for the smart socket strip.

• B1: Power strip On/Off
• B2: Socket 1 On/Off
• B3: Socket 2 On/Off
• B4: Socket 3 On/Off
• B5: All USB sockets On/Off
• B6: Settings
• B7: Schedule
• B8: Countdown
• B9: Electric: View energy consumption
• B10: Rename sockets

Settings

Change Device Name

1. From the "Overview" screen, select [More Options Icon] → [Edit Icon].
2. Enter a new device name.

Connect with Amazon Alexa or Google Assistant

1. From the "Overview" screen, select [More Options Icon].
2. Select an option under "Third-party Control".
3. Follow the onscreen instructions to complete the setup process.

Device Sharing

To share access to a device, e.g., with a family member:

1. From the "Overview" screen, select [More Options Icon] → "Share Device".
2. Follow the onscreen instructions.

Remove Device

From the "Overview" screen, select [More Options Icon] → "Remove Device".

Offline Notification

Receive a notification if your device goes offline.

From the "Overview" screen, select [More Options Icon] → "Offline Notification" → toggle on/off.

Create Groups

Devices under the same group can be controlled all at once.

1. From the "Overview" screen, select [More Options Icon] → "Create Group".
2. Follow the onscreen instructions.

Push Notifications

1. From the "Home Page" view, select "Me" → "Settings" → "App Notification".
2. Set your notification settings as required.

FAQ

Visit a list of frequently asked questions here: From the "Overview" screen, select [More Options Icon] → "FAQ & Feedback".

Troubleshooting

App cannot connect to device

This may be due to a weak Wi-Fi signal or an interrupted connection.

• Check that your internet connection is working correctly. Check cables, routers, and connections. Restart network devices if necessary.
• Check that the device is within range of your Wi-Fi access point. Use of other 2.4 GHz products, e.g., wireless networks and microwave ovens, may cause interference.
• You may need to set up a wireless repeater to improve the connection.
• If the device is battery-powered, it may need to have the batteries replaced.

Resetting the device

Resetting a device may help resolve erratic behavior such as connection problems.

1. Insert the included reset pin into the reset hole.
2. Press down until you feel a "click", then hold for 4-5 seconds until you hear an audio prompt.
3. If needed, repeat steps to "Add device".