CYCPLUS M1 Smart GPS Bike Computer - Quick Start Guide

Getting Started

To receive satellite signals, please remain static and ensure your device is used in an open space and barrier-free area.

Press the [left button ►II] to turn on the device.
After startup, it takes a few minutes to get a GPS signal. The icon indicates the device is ready.
Press the [left button ►II] again to start recording. The icon appears when recording starts.
Long press the [mid button] to save the recording data. The icon disappears when the data has been saved.
Long press the [left button ►II] to turn off the device.

Introduction

NAME: Smart GPS bike computer

MODEL: M1

SCREEN SIZE: 2.9 inch LCD

PRODUCT SIZE: 90*53*20 mm

PRODUCT WEIGHT: 77.5 g

BATTERY: 1200 mAh 3.7 V

MEMORY CAPACITY: 150 hours

ENDURANCE TIME: 30-35 hours

CHARGING MODE: Type-C

CHARGING TIME: Nearly 3.5 hours

APP CONNECTION: Bluetooth 5.0

PERIPHERAL CONNECTION: ANT+

SUPPORTED PERIPHERALS: Speed sensor, Cadence sensor, Heart rate monitor, Powermeter.

WATERPROOF: IPX6 (Rain-proof, not soakable)

Current Data Display

The device displays real-time data including:

Clock: Current time.
Temperature: Ambient temperature.
Speed: Current speed.
Ant+: Indicates connection status with ANT+ sensors.
Heart rate: Current heart rate.
Cadence: Current cadence.
Power: Current power output.
Trip time: Duration of the current ride.
Trip dist: Distance covered in the current ride.
GPS Status: Indicates GPS signal strength.
Battery Level: Shows remaining battery power.
Lap Counter: Counts laps or segments.
Gradient: Current incline or decline.
Altitude: Current altitude.
Ascent: Cumulative elevation gain.
Odometer: Total distance recorded.

Data can be viewed in NOW (Current Data), AVG (Average Data), and MAX (Maximum Data) modes.

Settings

Long press the [right button] to enter the settings menu. Press the [right button] to cycle through 8 setting pages.

ANT+ Sensor Connection

Press the [left button] to start searching for ANT+ sensors.
When a sensor is found, its data will appear on the screen. If no sensor is found, the sensor digits will flash.
The device will return to the main interface after 10 seconds if no sensor is connected.

Wheel Circumference Setting

Press the [left button] to start setting.
Press the [right button] to modify the digit.
Press the [mid button] to switch between digits.
Press the [left button] to finish setting.

Time Zone Setting

Press the [left button] to start setting.
Press the [right button] to modify the time zone.
Press the [left button] to finish setting.

Speed Unit Setting

Press the [left button] to start setting.
Press the [right button] to switch between KMH and MPH.
Press the [left button] to finish setting.

Temperature Unit Setting

Press the [left button] to start setting.
Press the [right button] to switch between °C and °F.
Press the [left button] to finish setting.

Factory Reset

Press the [left button] to start the reset process.
Long press the [mid button] to restore factory settings. The computer will then turn off.

XOSS APP Connection

Scan the QR code or download the XOSS APP from Google Play or the APP store. Register by email, then open your phone's Bluetooth.

Connecting to M1 Computer

Open the XOSS app, select CYCPLUS M1, and then click connect. Choose the paired computer from the found devices.

Connecting STRAVA/Training Peaks

Find Strava/Training Peaks in your personal files and click connect. Log in with your Strava/Training Peaks account and password. (Google and Facebook account login are not supported).

Updating Data and Checking Analysis

Click Sync to sync records to the APP. If Strava is connected, data will sync automatically to Strava. Select the activity on the exercise page to view cycling data.

Notes

Data Recording: Long press the left button to turn on, then press the left button to start recording. Remember to long press the middle button to save the record after riding.
Memory: When the memory is full, the computer will overwrite previous records in chronological order.
Backlight: After setting the time zone, the backlight will automatically turn on daily from 18:00 to 9:00. It will light up when any button is pressed and turn off 10 seconds later if there is no operation.

Package List

The package includes:

GPS bike computer
Bike computer mount
Rubber pad
Instruction manual
Rubber band x 3
Type-C charging cable

Factory Info

Chengdu Chendian Intelligent Technology Co., Ltd.

Warranty

Free replacement or repair within 1 year.

After-sale E-mail

steven@cycplus.com

	CYCPLUS M1 GPS Bike Computer User Manual User manual for the CYCPLUS M1 GPS Bike Computer, detailing its features, setup, operation, and connectivity with apps like XOSS and Strava.
	Cycplus M1 Smart GPS Bike Computer Quick Start Guide A comprehensive guide to setting up and using the Cycplus M1 Smart GPS Bike Computer, covering basic operations, settings, and connectivity.
	CYCPLUS M1 GPS Bike Computer User Manual Comprehensive user manual for the CYCPLUS M1 GPS Bike Computer, covering setup, features, settings, and installation. Learn how to use your device for cycling tracking and data analysis.
	Cycplus M1 GPS Bike Computer User Manual Comprehensive user manual for the Cycplus M1 GPS Bike Computer, covering setup, features, data syncing, and troubleshooting. Learn how to use your device for cycling tracking and analysis.
	Cycplus M1 Cycling Computer User Manual Comprehensive user manual for the Cycplus M1 cycling computer, covering setup, features, connectivity, and maintenance. Learn how to use your device for tracking rides, connecting to apps like Strava, and understanding its specifications.
	Cycplus M1 GPS Bike Computer User Manual and Setup Guide Explore the Cycplus M1 GPS Bike Computer user manual. Learn about its features, installation, quick start, button functions, settings, app connectivity with XOSS, Strava, and TrainingPeaks, and detailed specifications for optimal cycling performance.
	CYCPLUS M1 GPS Bike Computer User Manual User manual for the CYCPLUS M1 GPS bike computer, detailing features, setup, connectivity with XOSS app, Strava, and TrainingPeaks, and technical specifications.
	CYCPLUS GPS Bike Computer M2 User Manual User manual for the CYCPLUS GPS Bike Computer M2, detailing its features, setup, operation, and maintenance.