KALLAX Shelving Unit
Safety Warnings
⚠️ WARNING
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install the anti-tip device provided.
- NEVER put a TV on this product. ??
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. ??
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instruction carefully.
Tools Required
The following tools are recommended for assembly:
- Screwdriver ?
- Hammer ?
- Spirit Level ?
Assembly may be easier with two people. [two-person-icon]
Parts List
Ensure all parts are present before starting assembly:
| Part | Description | Quantity |
|---|---|---|
| Main Panels | Structural panels forming the cube | 6x |
| Long Screws | For main frame assembly | 8x (e.g., 104321, 104322) |
| Wooden Dowels | For joining panels | 14x (101339) |
| Allen Key | For specific screws | 1x (121030) |
| Shelf Supports | For internal shelves | 4x (153550) |
| Corner Brackets | For securing top rear | 2x (115753) |
| Wall Brackets | For wall mounting | 2x (103693) |
| Short Screws | For attaching bracket (121030) | 4x (100092) |
| Screws for Corner Bracket | For attaching corner bracket | 2x (100372) |
| Wall Mounting Hardware | Screws and anchors for wall attachment | 4x (e.g., 115754, 118673, 118225, 119509) |
Assembly Steps
- Step 1: Attach a bracket (121030) to a long panel using two short screws (100092).
- Step 2: Insert wooden dowels (101339) into the designated holes on the panels. Join the panels together, ensuring correct alignment. Use a hammer to gently tap the dowels and secure the connection. Avoid forcing parts. ❌
- Step 3: Continue assembling the frame by inserting dowels (101339) into the appropriate holes and joining the panels. Secure with long screws (e.g., 101339) where indicated.
- Step 4: Insert the internal shelf panels. Secure them using dowels (101339) and long screws (e.g., 101339) as shown in the diagram.
- Step 5: Insert the remaining internal shelf panels into their positions.
- Step 6: Secure the internal shelf panels by inserting dowels (101339) and using long screws (e.g., 101339) on the outer frame.
- Step 7: Slide the final shelf panel into place.
- Step 8: Attach the back panel to the assembled frame using long screws (e.g., 104321, 104322) and the provided bracket (121030).
- Step 9: Attach the top and bottom panels to the main structure using shelf supports (153550) and screws.
- Step 10: Attach a corner bracket (115753) to the top rear of the shelving unit using two screws (100372).
- Step 11: Position the shelving unit against the wall. Mark the wall through the holes in the wall bracket (103693).
- Step 12: Secure the wall bracket (103693) to the wall using appropriate wall mounting hardware (screws/anchors, e.g., 115754, 118673, 118225, 119509). Ensure the bracket is level.
- Step 13: Attach the shelving unit to the secured wall bracket. Ensure the unit is stable and securely fastened to prevent tip-over.
