About This Guide
This guide provides essential information to help you get started with your Anker SoundCore A3102 portable Bluetooth speaker. It covers setup, operation, controls, specifications, and customer support.
What's Included
- Anker SoundCore Speaker
- USB Charging Cable
At a Glance
- 1. Power Button: Turns the speaker on/off.
- 2. Volume Buttons: Adjust audio volume.
- 3. Play/Pause Button: Controls music playback.
- 4. Bluetooth Pairing Button: Initiates Bluetooth pairing.
- 5. Battery Indicator: Shows battery status.
- 6. 3.5mm AUX Input: For wired audio connection.
- 7. Micro USB Charging Port: For charging the speaker.
- 8. Microphone: For hands-free calls.
- 9. Status Indicator: Displays connection and power status.
Getting Started
1. Turn On / Off
Press and hold the power button for a few seconds to turn the SoundCore on or off. The speaker will automatically turn off after 10 minutes if no device is connected.
2. Charge Your SoundCore
Use the included USB cable to charge your SoundCore. Ensure it is fully charged before first use.
Charging Indicators:
- Flashing Red Light: Low Power
- Solid Red Light: Charging
- Light Off: Fully Charged
3. Pair with Your Device
Turn on your SoundCore. The status indicator will flash blue rapidly, indicating it is in pairing mode.
On your device (phone, tablet, etc.), go to Bluetooth settings, find 'Anker SoundCore' in the list of available devices, and select it to connect.
Once connected, the status indicator will turn solid blue.
Note: When turned on, SoundCore will automatically connect to the last connected device if available. If not, it will enter pairing mode.
Having connection problems? Remove SoundCore from your device's Bluetooth history, ensure it's less than 3 feet (approx. 1 meter) away, and try pairing again.
4. Connect via AUX
Connect your device to the SoundCore using a 3.5mm AUX cable (sold separately).
When using AUX mode, control audio playback via the connected device.
The status indicator will show a rapidly flashing blue light in AUX mode.
Controls
- Play/Pause: Press the Play/Pause button once to play or pause music.
- Skip Forward: Press and hold the Volume Up button for 2 seconds to skip to the next track.
- Volume Up/Down: Press the Volume Up or Volume Down buttons to adjust the volume.
- Answer/End Call: Press the Play/Pause button once to answer or end a call.
- Reject Call: Press and hold the Play/Pause button for 1 second to reject an incoming call.
- Put Call on Hold & Answer Incoming: Press the Power button once to put the current call on hold and answer an incoming call.
- Switch Between Calls: Press the Power button twice to switch between a held call and an active call.
Specifications
| Feature | Details |
|---|---|
| Input | 5V ⎓ 1A |
| Audio Output | 3W x 2 |
| Charging Time | 5-6 hours |
| Play Time | Up to 24 hours (varies by volume and content) |
| Size | 165 x 45 x 54 mm (6.5 x 1.8 x 2.1 in) |
| Weight | 365 g (12.9 oz) |
| Range | 20 m / 66 ft |
Important Safety Information
- [Warning Symbol] Do not expose to liquids.
- [Warning Symbol] Do not disassemble the device.
- [Warning Symbol] Avoid dropping the speaker.
- [Warning Symbol] Avoid extreme temperatures.
- [Warning Symbol] Use original or certified cables for charging.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. It has been tested and found to comply with the limits for a Class B digital device.
This product complies with the radio interference requirements of the European Community (CE) and the United Kingdom (UKCA).
Contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s).
Dispose of used batteries according to local regulations. [Recycling Symbol] This symbol indicates the product should not be discarded as household waste and must be taken to an appropriate recycling facility.
Customer Service & Warranty
Warranty: 18-month limited warranty.
Technical Support: Lifetime technical support.
For FAQs and more information, please visit: www.anker.com or www.anker.com/support
Contact Anker Innovations Limited for support.
