At a Glance
The Anker SoundCore speaker is shown from the top and front. Various buttons and ports are numbered for identification.
| Number | Component |
|---|---|
| 1 | Power Button [power-symbol] |
| 2 | Volume Buttons [volume-up]/[volume-down] |
| 3 | Play/Pause Button [play-pause-symbol] |
| 4 | Bluetooth Button [bluetooth-symbol] |
| 5 | Battery Indicator [battery-indicator] |
| 6 | 3.5mm Aux Input [aux-input] |
| 7 | USB-C Charging Port [usb-c-port] |
| 8 | Microphone [microphone] |
| 9 | Status Indicator [status-indicator] |
Charging Your Speaker
Use the included USB cable to charge your SoundCore and make sure it is fully charged before first use.
Illustrations show the charging process: the speaker connected to a laptop via a USB-C cable, and the speaker connected to a power source via a USB-C cable.
| Indicator Status | Meaning |
|---|---|
| Flashing Red | Low Battery |
| Steady Red | Being Charged |
| Off | Fully Charged |
Powering On / Off
Press and hold the Power Button [power-symbol] for 2 seconds to turn the speaker on or off.
An illustration shows a finger pressing the power button on the speaker for more than 2 seconds.
This speaker will power off automatically after 10 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Enable Bluetooth on your mobile device. Then press the Bluetooth button [bluetooth-symbol] on the speaker to enter Bluetooth pairing mode, then select "SoundCore" from the Bluetooth list to connect.
Three steps illustrate the Bluetooth pairing process: 1. Mobile device with Bluetooth enabled and "SoundCore" visible. 2. Speaker's Bluetooth button being pressed. 3. The Anker SoundCore speaker.
| Action | Status | Indicator Light |
|---|---|---|
| Press Bluetooth Button [bluetooth-symbol] | Enter / Exit Bluetooth Pairing Mode | Flashing Blue |
| Bluetooth Pairing | Bluetooth Pairing | Flashing Blue |
| Bluetooth Connected | Bluetooth Connected | Steady Blue |
- To un-pair the connected device and re-enter pairing mode, press and hold the Bluetooth button [bluetooth-symbol] for more than 1 second.
- If the speaker has connection problems, remove it from your device's Bluetooth history, ensure it's less than 3 feet away then try pairing again.
Connect via AUX
Connect an audio source to the speaker using a 3.5mm AUX cable [aux-input]. The SoundLine AUX cable is sold separately.
An illustration shows a 3.5mm AUX cable connecting a laptop (with a music note icon [music-note]) to the speaker's AUX input port [aux-input].
soundcore App
Download the soundcore app to enhance your experience.
Google Play and the Google Play logo are trademarks of Google Inc. Apple and the Apple logo are trademarks of Apple Inc.
Specifications
| Specification | Details |
|---|---|
| Power Input | 5V = 1A |
| Audio Output | 3W x2 |
| Charging Time | 5 to 6 Hours |
| Playtime (varies by volume level and music content) | 24 Hours |
| Size | 165×45×54 mm (6.5×1.8×2.1 in) |
| Weight | 365 g / 12.9 oz |
| Bluetooth Range | 20m / 66ft |
Compliance and Serial Number Information
Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages/psti-related.
Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, explained in the table below.
| Variable 'x' | Range of variable | Content |
|---|---|---|
| Eighth | 0-9 or A-F | Denotes the hardware version which is not effected on the safety compliance. |
| Ninth | 8,9,A,B,C... | Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on. |
| Tenth and Eleventh | 01,02,03... | Denotes weeks, 01 means the first week in this year, 02 means the secondary week in this year, and so on. |
| Twelfth | 1-7 | Denotes date, 1 means Monday, 2 means Tuesday..., 7 means Sunday and so on. |
| The last five | 00001-99999 | Denotes serial No. |
Adapter Information
Additional information regarding the applicable adapter:
- Brand: ANKER
- Manufacturer: Anker Innovations Limited
- Model: A2337
- Input: 100-240V = 1.0A, 50-60Hz
- Output: 5.0V = 3.0A 15.0W / 9.0V = 3.0A 27.0W / 12.0V = 2.5A 30.0W / 15.0V = 2.0A 30.0W / 20.0V = 1.5A 30.0W (30.0W Max)
Port Description
Default Open Port: Classic Bluetooth
Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.
Additional notes on power consumption and management:
- Power consumption in standby mode: ≤0.5W
- Power management: ≤ 20min
SOUNDCORE - Passport
