Safety First: Preventing Furniture Tipover
WARNING!
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ⚠️ ALWAYS install tipover restraint provided.
- ⚖️ kg NEVER put a TV on this product.
- ✋ NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
- ➡️ NEVER open more than one drawer at a time.
- ⬇️ Place heaviest items in the lowest drawers.
Tools and Hardware
Tools Required:
The following tools are typically needed for assembly:
- Screwdrivers (Phillips and Flathead) ?
- Hammer ?
- Drill with drill bits (Ø 8 mm / 5/16" and Ø 3 mm / 1/8") ?
- Pencil
- Measuring tape
- Wrench (included, part 190459)
Hardware Included:
Various screws, dowels, cam locks, brackets, and other fasteners are provided. Refer to the diagrams for specific part numbers and quantities used in each step.
Key hardware components and their part numbers (refer to diagrams for quantities):
- Part 109567 (Screw)
- Part 10087223 (Wall Plug)
- Part 109049 (Screw)
- Part 100823 (Bracket)
- Part 106989 (Bracket)
- Part 118331 (Dowel/Pin)
- Part 10096669 (Cam Lock Screw)
- Part 101350 (Dowel/Pin)
- Part 113434 (Cam Lock)
- Part 120076 (Cam Lock Screw)
- Part 10048881 (Screw)
- Part 151705 (Screw)
- Part 151706 (Bracket)
- Part 102553 (Bracket)
- Part 159991 (Bolt)
- Part 153549 (Dowel/Pin)
- Part 10127303 (Drawer Slide Component)
- Part 106603 (Screw)
- Part 10083447 (Handle/Knob component)
- Part 10091526 (Handle/Knob component)
Assembly Instructions
Step 1: Attach Drawer Slides to Side Panels
Attach six drawer slide components (part 10127303) to the left (L) and right (R) side panels using six screws (part 10048881) for each side. Ensure correct orientation as shown in the diagram.
Step 2: Attach Wall Mounting Brackets
Attach two wall mounting brackets (part 106989) to the top rear edge of the left side panel using two screws (part 109049) and two plugs (part 100823). Repeat for the right side panel.
Step 3: Prepare Main Frame Panels
Insert six screws (part 10048881) into the designated holes on the main frame panels. Ensure they are partially screwed in, ready to connect other components.
Step 4: Prepare Other Main Frame Panels
Insert six screws (part 10048881) into the designated holes on another set of main frame panels. Ensure they are partially screwed in.
Step 5: Join Vertical Panels
Connect two vertical panels by inserting screws (part 109567) into the pre-drilled holes. Ensure the panels are aligned correctly.
Step 6: Join Horizontal Panels
Connect horizontal panels to the vertical panels. Arrows indicate the direction of insertion and connection.
Step 7: Continue Frame Assembly
Continue joining frame panels. Arrows indicate the direction of insertion and connection.
Step 8: Complete Frame Assembly
Complete the main frame assembly by connecting the remaining panels. Arrows indicate insertion and connection points.
Step 9: Insert Dowels
Insert twelve dowels (part 101350) into the designated holes on the horizontal and vertical frame components.
Step 10: Assemble Top and Bottom Panels
Attach the top and bottom panels to the assembled frame. Insert eight dowels (part 101350) into the frame. Arrows indicate the direction of placement.
Step 11: Attach Support Beams
Attach two long support beams to the frame using six screws (part 118331) per beam. Screws are inserted into pre-drilled holes.
Step 12: Attach Remaining Support Beams
Attach the remaining two long support beams to the frame. Insert two dowels (part 101350) into the ends of one beam and connect it to the frame.
Step 13: Connect Side Frame Pieces
Connect the side frame pieces. Hand icons indicate where to hold and align parts.
Step 14: Assemble Main Box Frame
Assemble the main box frame by connecting the side and top/bottom pieces. Hand icons indicate where to hold and align parts.
Step 15: Install Cam Locks
Install six cam lock mechanisms (part 113434) into the designated holes on the frame. Use a screwdriver to turn the cam locks to secure connections.
Step 16: Attach Support Brackets
Attach four support brackets (part 151706) to the frame using screws (part 151705).
Step 17: Insert Dowels for Drawer Support
Insert nine dowels (part 101350) into the designated holes on the frame to support the drawers.
Step 18: Attach Drawer Fronts
Attach the drawer fronts to the assembled drawer boxes. Use four screws (part 151705) and four brackets (part 151706) per drawer front. Hand icons indicate alignment.
Step 19: Attach Drawer Support
Attach one support piece (part 153549) to the top of the cabinet structure.
Step 20: Secure Cabinet Base
Secure the cabinet base using five bolts (part 159991).
Step 21: Attach Feet/Base
Attach the base feet to the bottom of the cabinet. Use the included wrench (part 190459) to adjust the feet for leveling. Arrows indicate adjustment directions.
Step 22: Attach Drawer Slide Runners
Attach the inner drawer slide runners to the drawer boxes. Two runners per drawer. Arrows indicate insertion and locking mechanism.
Step 23: Slide Drawer Boxes into Frame
Slide the assembled drawer boxes into the main cabinet frame. An arrow indicates the direction of insertion.
Step 24: Wall Mounting Guidance
Wall Mounting: The supplied screws and plugs can be used with most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If you are uncertain, seek professional advice. Visit www.IKEA.com/secure-it for more information.
Step 25: Attach Front Panel Brackets
Attach two brackets (part 100823) to the front of the cabinet using screws (part 109567).
Step 26: Assemble Drawer Sides
Assemble the sides of the drawer boxes. Two drawer boxes require 2x components, four drawer boxes require 4x components. Arrows indicate connection points.
Step 27: Attach Drawer Back Panel
Attach the back panel to the drawer assembly.
Step 28: Secure Drawer Sides
Secure the drawer sides using four screws (part 10096669).
Step 29: Attach Drawer Runners
Attach drawer runners (part 120076) to the drawer sides using four screws.
Step 30: Attach Drawer Handles/Knobs
Attach drawer handles/knobs (parts 10083447, 10091526) using one screw (part 106603).
Step 31: Insert Drawer Slides into Cabinet
Insert the drawer slide mechanisms into the cabinet frame. Arrows indicate the direction of insertion.
Step 32: Insert Drawers
Insert the assembled drawers into the cabinet. A "Click!" sound indicates proper engagement. Ensure the tipover restraint is installed.
Step 33: Insert Drawers
Insert the assembled drawers into the cabinet. Arrows indicate insertion direction.
Step 34: Insert Drawers
Insert drawers into the cabinet. Arrows indicate insertion direction.
Step 35: Insert Drawers
Insert drawers into the cabinet. A "Click!" sound indicates proper engagement.
Step 36: Final Check and Securing
Perform a final check of all connections. Ensure the unit is stable and properly secured, especially if wall-mounted.
