AstroAI 4L Mirror Refrigerator User Manual
This user manual contains important information regarding the safety, operation, maintenance, and storage of this product. Please read and understand all warnings, instructions, and product labels before use. Failure to do so may result in personal injury or property damage. Keep this manual for future reference.
Thank you for purchasing the AstroAI 4L Mirror Refrigerator. This is a portable refrigerator that can be used with a 12V car and a standard outlet. It can maintain a suitable temperature using its cooling and warming functions.
We hope you enjoy your new 4L Mirror Refrigerator. If you have any questions, please feel free to contact us at support@astroai.com.
Important Precautions
- Connect to a 110V power source. (Voltage varies by country. Please select and purchase the product according to the actual situation.)
- When using a 12V car power source, do not connect the refrigerator for a long time with the engine stopped.
- Do not connect directly to the 24V cigarette lighter socket of large vehicles.
- During thunderstorms or when not in use for a long time, unplug the equipment to avoid damage.
- Do not open or remove the cover.
- To avoid fire or electric shock, do not overload wall outlets, extension cords, or other receptacles.
- Use the correct power source. Insert the product into the correct power source according to the marks indicated in the instruction manual or on the product.
- The power voltage should be the same as the voltage indicated in the instruction manual or on the equipment nameplate.
- To completely disconnect the unit from the power supply, turn off the power and unplug the power plug completely.
- Do not bend, pull, or tug on the power cord, as this may cause electric shock.
- When installing, place the unit in a location where the power socket is easily accessible.
- Avoid using in places where dust or air pollutants may be drawn into the fan.
- Do not place the refrigerator in poorly ventilated areas such as a car trunk.
- Do not rub hard or turn upside down.
- Do not stand on the refrigerator.
- Ensure at least 2 inches of clearance from the back and sides of the unit for air circulation and heat dissipation.
- Before switching from warming mode to cooling mode, turn off the refrigerator for about 30 minutes to return it to room temperature. The same applies in reverse.
- Do not place near rain, corrosive gases, or liquids.
- If not in use for a long time, turn off the power, avoid direct sunlight, and store in a dry, well-ventilated place.
- Children should not use it alone. Children should use it under adult supervision.
Product Diagram
Key Components:
- (1) Handle
- (2) Door Lock
- (3) Light Bar
- (4) Light Bar Switch
- (5) Partition
- (6) Shelf
- (7) Cooling Indicator
- (8) Warming Indicator
- (9) Cooling/Off/Warming Function Switch
- (10) DC Power Interface
- (11) AC Power Interface
- (12) AC Power Cord
- (13) DC Power Cord
[Diagram showing the exterior and interior of the refrigerator with numbered components]
13.5cm
24.5cm
26.5cm
14cm
17.5cm
20.5cm
[Diagram showing the dimensions of the refrigerator]
Operating Instructions
I. Car Operation Instructions
Note: To avoid dust and dirt on the mirror surface, do not remove the protective film from the mirror surface when using it frequently in the car.
- Before plugging the power cord connector into the socket, adjust the mode button to 'Off' (the middle position of the cooling/off/warming switch). At this time, the two indicator lights will not be on.
- Plug the power cord into the DC power connector on the back of the refrigerator.
- Secure the refrigerator in the desired position and plug the power cord into the vehicle's power socket.
- Turn the cooling/off/warming function switch to the 'Cool' position, and the green cooling indicator will light up. Turn the cooling/off/warming function switch to the 'Warm' position, and the red warming indicator will light up.
Warning: Prolonged operation of the mirror refrigerator with the car engine off may drain the car battery.
II. Home Operation Instructions
- Before use, please remove the protective film from the mirror surface to avoid affecting your vision. For long-term use, clean the mirror surface to avoid affecting the use effect. This manual provides detailed instructions on mirror cleaning and maintenance.
- Before plugging the power cord connector into the socket, adjust the mode button to 'Off' (the middle position of the cooling/off/warming switch). At this time, the two indicator lights will not be on.
- Plug the power cord into the AC power connector on the back of the refrigerator.
- Secure the refrigerator in the desired position and plug the power cord into a standard wall outlet.
- Turn the cooling/off/warming function switch to the 'Cool' position, and the green cooling indicator will light up. Turn the cooling/off/warming function switch to the 'Warm' position, and the red warming indicator will light up.
- When using the mirror, you can touch the light bar switch to adjust the brightness.
Cooling Tips
- For faster cooling, place already chilled cans inside.
- It can be used not only for cooling drinks but also for cooling skincare products and cosmetics.
- The cooling effect depends on the ambient temperature. If the ambient temperature is high, the minimum temperature inside the unit will also be higher. Ambient temperature refers to the surrounding air temperature.
Warming Tips
- Warming is for maintaining temperature and is not intended for heating purposes.
- By closing the door properly, you can maintain the temperature of warm items inside for several hours.
Care and Maintenance
- Always disconnect the power before daily maintenance and cleaning.
- Clean the casing with a damp cloth and mild detergent.
- If not in use for a long time, keep the interior dry.
- Do not handle with care, do not collide or compress.
Mirror Cleaning
- You can clean the mirror with hand soap.
- Wiping with a soft cloth or gauze soaked in kerosene or wax is also effective.
- You can clean the mirror by wiping it with a cloth soaked in milk.
- Applying soap to the mirror and wiping with a dry cloth will make the mirror surface clean.
- Washing with acidic lotion or detergent can also achieve cleaning effects.
Troubleshooting
| Symptom | Solution |
|---|---|
| Condensation | - Do not open or close the door frequently. - Do not place warm items in the cooling compartment. |
| Not working | - Check the indicators (cooling/warming indicator). If the indicator does not light up or lights up intermittently, check if the power is on. - Ensure the power cord and its connection are secure. Try cleaning any dust on the power plug. - Check if the car power is on (for car use). - Check if the operating voltage matches the local voltage (for home use); suitable for 12V cigarette lighters only (for car use). |
| Not cooling | - Check if the switch is turned to the cooling function switch. - Check if the fan is rotating (if abnormal, please contact support@astroai.com). - The minimum temperature depends on the ambient temperature, but the lowest achievable temperature is 32°F (0°C). The lower the ambient temperature, the better the cooling effect. |
| Poor heat dissipation | - Ensure at least 2 inches of clearance from the surroundings in the usage environment. - Do not use in high-temperature environments. - Do not place warm items in the cooling compartment. |
| Light bar not lighting up | - Check if the power is on. - Try touching the light bar switch. Check if it can be set to on/off. |
Specifications
| Mini Refrigerator | |
| Type | LY1904 |
| Capacity | 4 L |
| Input Voltage | DC12V |
| AC100 - 120V (USA) | |
| AC100 - 110V (JP) | |
| AC200 -240V (DE/UK/FR/ES) | |
| Operating Temperature | 18 ~ 20°C lower than ambient temperature |
| 140°F (60°C) Heat | |
| Certification | ETL / CE / PSE / UKCA / RoHS |
| Double Insulation | ☐ |
1 Year Worry-Free Warranty
The AstroAI 4L Mirror Refrigerator will be replaced free of charge if it malfunctions due to defects in materials and workmanship. This warranty does not apply to damage caused by neglect, misuse, contamination, modification, accident, or abnormal conditions of operation or handling. This warranty is valid only for the original purchaser and is non-transferable.
We are working hard every day to provide better service and quality to our customers. For more information, please visit astroai.com.
Web: www.astroai.com
E-mail: support@astroai.com
[AstroAI Logo]
