AstroAI 10L Mini Fridge

Thank you for purchasing the AstroAI 10L portable mini fridge. This portable refrigerator can be used with a 12-volt power outlet or a standard wall outlet. With the included cooling and heating function, it can keep everything at the perfect temperature.

For questions or concerns, please contact us at support@astroai.com.

Safety Information

Connect the device to a 110V power source. (Note: Different countries have different voltages. Select the product corresponding to your actual situation when purchasing.)
When using the 12V vehicle power, do not keep the refrigerator plugged in for a long time when the engine is not running.
Do not connect directly to the 24V cigarette lighter socket in heavy-duty vehicles.
Unplug the device from the power source during a thunderstorm or if it will not be used for a long time to prevent damage.
Do not open or remove the cover, as you may be exposed to dangerous voltages or other hazards.
To avoid the risk of fire or electric shock, avoid overloading electrical outlets, extension cords, or other devices carrying electrical loads.
Use a suitable power source. Plug the product into a suitable power source according to the instructions in the manual or on the product label.
The supply voltage must match the voltage indicated in the manual and on the device's nameplate.
To completely disconnect the device from the power supply, turn off the power supply and completely unplug the plug from the power outlet.
To avoid electric shock, do not bend, stretch, or pull the power cord.
The socket must be easily accessible during installation.
Do not use where dust or other air contaminants may enter the fan.
Leave at least 5 cm (approx. 2 inches) of space from the back and sides of the device to allow for air circulation and heat dissipation.
Do not place the refrigerator in poorly ventilated areas, such as a car trunk.
Handle with care, do not squeeze.
Do not sit on the refrigerator.
Before switching from heating mode to cooling mode, turn off the refrigerator for 30 minutes to allow it to return to ambient temperature, and vice versa.
Do not expose the product to rain and keep it away from corrosive gases and liquids.
If not in use for a long time, unplug the power supply and store it in a dry, ventilated area. Avoid direct sunlight.
Strictly for use by children; children should be supervised by an adult.

Size Description

Exterior Dimensions:

(1) Width: 25 cm (9.8 in)
(2) Depth: 32.5 cm (12.8 in)
(3) Height: 35.2 cm (13.9 in)

Interior Dimensions:

(4) Width: 19 cm (7.5 in)
(5) Depth: 18 cm (7.1 in)
(6) Height: 27 cm (10.6 in)

Illustrated Parts

The AstroAI 10L Mini Fridge features the following components:

(1) Handle
(2) Door Latch
(3) Shelf
(4) Divider Plate
(5) Condensate Water Tray
(6) Cooling Mode Indicator Light
(7) Heating Mode Indicator Light
(8) Heating/Off/Cooling Switch
(9) Non-ECO Mode / ECO Mode Switch
(10) DC Power Input Interface
(11) AC Power Input Interface
(12) AC Power Cord
(13) DC Power Cord

Usage

Automatic Operating Steps (Vehicle Use)

Before plugging in the power cord, set the mode switch to the 'Off' position (the middle gear of the heating/off/cooling switch). Both indicator lights should be off.
Plug the power cord into the DC power input interface on the back of the refrigerator.
Connect the refrigerator and plug the power cord into the car's cigarette lighter socket.
Set the cooling/heating switch to 'Cooling' or 'Heating'. The green indicator light turns on for cooling mode. The red indicator light turns on for heating mode.

NOTICE: Operating the portable refrigerator with the vehicle engine turned off may drain the vehicle's battery.

Home Operating Steps

Before plugging in the power cord, set the mode switch to the 'Off' position (the middle gear of the heating/off/cooling switch). Both indicator lights should be off.
Plug the power cord into the AC power input interface on the back of the refrigerator.
Secure the refrigerator and plug the power cord into a standard wall outlet.
Turn the cooling/heating switch to 'Cooling' or 'Heating'. The green indicator light turns on for cooling mode. The red indicator light turns on for heating mode.

Mode Tips

ECO Mode

ECO mode is an energy-saving mode. The minimum cooling temperature in ECO mode is higher than in non-ECO mode, the cooling speed is slower, and the noise is much lower.
If you find the noise too high, you can switch from non-ECO mode to ECO mode. If you feel the cooling is insufficient, you can switch from ECO mode to non-ECO mode.

Cooling Mode Tips

To cool quickly, fill the refrigerator with cold beverages.
The cooling effect is influenced by the ambient temperature. A very high ambient temperature may cause the minimum temperature the refrigerator can reach to increase.
Note: Ambient temperature refers to the temperature of the surrounding air. For example, if the device is used for cooling and the ambient temperature around it is 24°C, the device will maintain the temperature within your set error range of approximately 1.7°C to 4.4°C.

Heating Mode Tips

The refrigerator is designed to maintain the temperature of items. It is not designed to heat items from cold.
As long as the door is closed properly, hot items will stay warm for a few hours after the refrigerator is turned off.

Care and Maintenance

Unplug the power cord completely before performing routine maintenance.
Use a damp cloth and a neutral detergent to clean the casing.
When not in use, ensure the interior is completely dry before storing.

Troubleshooting

Problem	Solution
Does not work	- Check the indicator light (cooling/heating indicator). If the indicator light does not illuminate or flickers, check the power connection status. - Verify that the plug has good contact. If necessary, clean the connector. - Ensure the car is turned on (for vehicle use). - Ensure the operating voltage matches the local voltage (for home use) and is suitable for 12V cigarette lighters (for vehicles).
Not cooling	- Ensure the switch is in the cooling mode. - Check if the fan is working correctly (if not, contact AstroAI for assistance). - The lowest possible temperature depends on the environment but should not be lower than 0°C. The lower the ambient temperature, the better the refrigerator's cooling effect.
Condensation	- Do not open or close the door frequently. - Do not cool high-temperature items directly.
Poor heat dissipation	- Ensure at least 5 cm (approx. 2 inches) of space from the wall for good heat dissipation. - Avoid use in high ambient temperatures. - Avoid cooling high-temperature items directly. - The fan speed in ECO mode is lower. If heat dissipation is poor, cancel ECO mode.

Parameter Description

Specification	Value	Details
Capacity	10L
Input Voltage	DC 12V	Cooling Mode: 50W / Heating Mode: 40W
	AC 100-120V	Cooling Mode: 64W / Heating Mode: 50W
	AC 200-240V	Cooling Mode: 64W / Heating Mode: 50W
Operating Temperature	20°C below ambient temperature
	140°F (60°C) Heating
Certifications	ETL, PSE, CE

3-Year Limited Warranty

Each AstroAI 10L Mini Fridge is free from defects in material and workmanship. This warranty does not cover damage caused by negligence, abuse, contamination, alteration, accident, or abnormal conditions of operation or handling. This warranty applies only to the original purchaser and is non-transferable.

AstroAI aims to provide customers with excellent products and customer service. For more information about AstroAI, please visit astroai.com.

	AstroAI 10L Mini Fridge User Manual Comprehensive user manual for the AstroAI 10L Mini Fridge, covering safety information, operating instructions for both car and home use, mode tips, care and maintenance, troubleshooting, and product specifications.
	AstroAI 10L Temperature Control Mini Fridge User Manual Comprehensive guide for the AstroAI 10L Temperature Control Mini Fridge, covering safety, operation, maintenance, and troubleshooting. Learn how to use both AC and DC power, switch between cooling and warming modes, and optimize performance.
	AstroAI 4L Mirror Fridge User Manual User manual for the AstroAI 4L Mirror Fridge, detailing safety information, operation, maintenance, and troubleshooting for model LY1904. Learn how to connect to 12V DC and 110V AC power supplies for cooling and warming functions.
	AstroAI 4L Mirror Mini Fridge User Manual Comprehensive user manual for the AstroAI 4L Mirror Mini Fridge, covering safety information, operating instructions for both vehicle and home use, maintenance, troubleshooting, and specifications. Learn how to use the cooling and heating functions, clean the mirror, and resolve common issues.
	AstroAI 10L Mini Fridge User Manual Comprehensive guide for the AstroAI 10L temperature-controlled mini fridge, covering safety, operation, maintenance, and troubleshooting for both AC and DC power sources.
	AstroAI 4L Mirror Mini Fridge User Manual User manual for the AstroAI 4L Mirror Mini Fridge, covering safety information, operation instructions for car and home use, cooling and heating modes, care and maintenance, mirror cleaning, troubleshooting, and technical specifications.
	AstroAI 6L Mini Fridge User Manual User manual for the AstroAI 6L Mini Fridge, model LY2206A. Includes safety information, diagrams, operating instructions for cool and warm modes, troubleshooting, maintenance, specifications, and warranty details.
	AstroAI 10L Mini Fridge User Manual Comprehensive user manual for the AstroAI 10L Compact Portable Mini Fridge, covering safety, operation, maintenance, troubleshooting, and warranty information. Learn how to use your mini fridge with both 12V car and standard wall outlets, utilizing its chill and heat functions.