AstroAI 4L Mirror Mini Fridge User Manual

This manual contains important information regarding the safety, operation, maintenance, and storage of the AstroAI 4L Mirror Mini Fridge. Please read and understand all warnings, instructions, and product labels before use to prevent injury or property damage. Keep this manual for future reference.

Thank you for purchasing the AstroAI 4L Mirror Mini Fridge. This portable refrigerator can be used in a car with a 12-volt power source or a standard wall outlet. With both cooling and heating functions, you can keep items at the perfect temperature. For questions or concerns, please contact AstroAI at support@astroai.com.

Safety Information

Connect the device to a 220V power source (ensure the product voltage matches your region).
When using the 12V vehicle power supply, do not connect the refrigerator for extended periods when the engine is not running.
Do not connect directly to the 24V cigarette lighter socket of heavy-duty vehicles.
Unplug the equipment during thunderstorms or when not in use for prolonged periods to prevent damage.
Do not open or remove the cover, as this may expose you to danger.
To avoid fire or electric shock, do not overload wall outlets, extension cords, or other electrical receptacles.
Use a suitable power supply that matches the product's voltage requirements as indicated in the manual and on the product label.
To completely disconnect the device from the power supply, turn off the power and unplug it.
Do not bend, stretch, or pull the power cord to prevent electric shock.
Ensure the power outlet is easily accessible during installation.
Avoid using the refrigerator in locations where the fan may draw in dust or other air contaminants.
Do not place the refrigerator in poorly ventilated areas, such as a car trunk.
Handle with care; do not squeeze or turn the unit upside down.
Do not sit on the refrigerator.
Maintain at least a 2-inch (approx. 5 cm) clearance from the back and sides of the unit for proper air circulation and heat dissipation.
Before switching from heating to cooling mode, turn off the refrigerator for 30 minutes to allow it to reach room temperature, and vice versa.
Do not expose the product to rain and keep it away from corrosive gases and liquids.
When not in use for an extended period, unplug the power and store it in a dry, ventilated environment, away from direct sunlight.
Children should not use the refrigerator alone; adult supervision is required.

Illustrative Explanation

The diagram shows the components of the AstroAI 4L Mirror Mini Fridge:

(1) Handle
(2) Light Bars
(3) Partition
(4) Mirror
(5) Interior Compartment
(6) Removable Shelf/Basket
(7) Heating Indicator Light
(8) Cooling Indicator Light
(9) Heating/Cooling/Off Switch
(10) Power Interface (DC)
(11) Power Interface (AC)
(12) AC Power Cord
(13) DC Power Cord

The diagram also indicates dimensions: Width 13.5cm, Height 26.5cm. The interior can hold items like four 355ml cans.

Operating Instructions

I. Vehicle Operation Instructions

Suggestion: Do not remove the protective film from the mirror surface if you frequently use the refrigerator in your vehicle to prevent dust and dirt accumulation.

Before plugging in the power cord, turn the mode switch to the OFF position (center position). The indicator lights should not be illuminated.
Plug the power cord into the DC power connector on the back of the refrigerator.
Secure the refrigerator in the desired position, then plug the power cord into the vehicle's power outlet.
Turn the cold/heat switch to the desired mode (Cool or Heat). The green indicator light will turn on in cooling mode, and the red indicator light will turn on in heating mode.

WARNING: Operating the refrigerator when the vehicle is turned off may drain the vehicle's battery.

II. Home Operation Instructions

Remove the protective film from the mirror surface before use to ensure clear visibility. Clean the mirror surface after prolonged use to maintain its effectiveness. Refer to the manual for detailed mirror cleaning and maintenance methods.

Before plugging in the power supply, turn the mode switch to the OFF position. The indicator lights should not be illuminated.
Plug the power cord into the AC power connector on the back of the refrigerator.
Secure the refrigerator in place and plug the power cord into a standard wall outlet.
Turn the cold/heat switch to the desired mode (Cool or Heat). The green indicator light will turn on in cooling mode, and the red indicator light will turn on in heating mode.
When using the mirror, you can touch the light bar switch to adjust the brightness.

Cooling Mode Tips

For the fastest cooling, fill the refrigerator with pre-chilled beverages.
The refrigerator is suitable for cooling beverages, skincare products, and cosmetics.
The cooling effect is influenced by the ambient temperature. Higher ambient temperatures may result in a higher minimum temperature achievable by the refrigerator.

Heating Mode Tips

The refrigerator is designed to maintain the temperature of items rather than actively heat them.
When the door is securely closed, hot items will remain warm for several hours after the refrigerator is turned off.

Care and Maintenance

Before performing routine maintenance, ensure the power plug is completely disconnected.
Use a damp cloth and a mild detergent to clean the exterior casing.
When the refrigerator is not in use, ensure the interior is completely dry before storing it.
Store the unit by its handles; do not squeeze.

Cleaning the Mirror

Use hand sanitizer for a thorough cleaning of the mirror.
Cleaning with a soft cloth or gauze dampened with kerosene or wax is also effective.
The mirror can also be cleaned with a cloth dampened with milk.
Apply soap to the mirror surface and wipe with a dry cloth.
Cleaning with an astringent lotion or detergent can also achieve a cleaning effect.

Troubleshooting

Issue	Possible Solutions
Light strip does not illuminate	Ensure the power supply is connected. Check if the light strip switch can be turned on and off normally.
Unit not working	Check the indicator light (cooling/heating). If it's not on or flickers, verify the power connection status. Check the outlet to ensure good contact; clean any dirt if necessary. Ensure the vehicle's power is on (for vehicle use). Verify that the operating voltage matches the local voltage (for home use). Only use with a 12V cigarette lighter for cars.
Not cooling	Ensure the switch is set to cooling mode. Check if the fan is operating correctly. If not, contact AstroAI for assistance. The lowest achievable temperature depends on the surrounding environment but will not be lower than 32°F (0°C). A lower ambient temperature results in better cooling performance.
Condensation	Avoid opening the door frequently or opening/closing it repeatedly. Do not place high-temperature items directly into the refrigerator.
Poor heat dissipation	Ensure at least 2 inches (approx. 5 cm) of clearance from the wall for good heat dissipation. Avoid use in high ambient temperatures. Do not place high-temperature items directly into the refrigerator.

Parameter Description

Mini Refrigerator
Model	LY1904
Capacity	4 L
Input Voltage	DC 12V	Cool Mode: 40W, Warm Mode: 32W
Input Voltage	AC 100-120V (USA)	Cool Mode: 0.7A, 50/60Hz; Warm Mode: 0.63A, 50/60Hz
	AC 100-110V (JP)	Cool Mode: 50W, 50/60Hz; Warm Mode: 40W, 50/60Hz
	AC 200-240V (DE/UK/FR/ES)	Cool Mode: 50W, 50/60Hz; Warm Mode: 40W, 50/60Hz
Operating Temperature	Below ambient temperature 18-20°C (Cooling)
	140°F (60°C) (Heating)
Certifications	ETL / CE / PSE / UKCA / RoHS
Class II Construction	Yes

AstroAI One-Year Limited Warranty

Each AstroAI 4L Mirror Mini Fridge is warranted to be free from defects in materials and workmanship. This warranty does not cover damage due to negligence, misuse, contamination, mishandling, accident, or abnormal conditions of operation or handling. Only the original purchaser may benefit from this warranty, and it is non-transferable.

AstroAI is committed to providing customers with excellent products and services. For more information, please visit astroai.com.

Web: www.astroai.com

E-mail: support@astroai.com

	AstroAI 4L Mirror Fridge User Manual User manual for the AstroAI 4L Mirror Fridge, detailing safety information, operation, maintenance, and troubleshooting for model LY1904. Learn how to connect to 12V DC and 110V AC power supplies for cooling and warming functions.
	AstroAI 4L Mirror Mini Fridge User Manual User manual for the AstroAI 4L Mirror Mini Fridge, covering safety information, operation instructions for car and home use, cooling and heating modes, care and maintenance, mirror cleaning, troubleshooting, and technical specifications.
	AstroAI 4L Mirror Refrigerator User Manual User manual for the AstroAI 4L Mirror Refrigerator, providing instructions on safe operation, maintenance, and troubleshooting for both car and home use. Features include cooling, warming, and a built-in light bar with adjustable brightness.
	AstroAI 10L Mini Fridge User Manual and Safety Guide Comprehensive guide for the AstroAI 10L Mini Fridge, covering safety information, operating instructions for both car and home use, mode tips, maintenance, troubleshooting, and specifications. Learn how to use and care for your portable cooling and heating device.
	AstroAI 6L Mirror Mini Fridge User Manual User manual for the AstroAI 6L Mirror Mini Fridge, covering safety, operation, maintenance, and troubleshooting. Includes specifications and warranty information.
	AstroAI 6L Mini Fridge with Mirror User Manual User manual for the AstroAI 6L Mini Fridge with Mirror, covering safety information, operation, maintenance, and troubleshooting for both car and home use.
	AstroAI 10L Temperature Control Mini Fridge User Manual Comprehensive guide for the AstroAI 10L Temperature Control Mini Fridge, covering safety, operation, maintenance, and troubleshooting. Learn how to use both AC and DC power, switch between cooling and warming modes, and optimize performance.
	AstroAI 6L Mini Fridge User Manual User manual for the AstroAI 6L Mini Fridge, model LY2206A. Includes safety information, diagrams, operating instructions for cool and warm modes, troubleshooting, maintenance, specifications, and warranty details.