AstroAI 4L Mirror Mini Fridge User Manual
This manual contains important information regarding the safety, operation, maintenance, and storage of this product. Please read and understand all warnings, instructions, and product labels before use. Failure to do so may result in personal injury or property damage. Please keep this manual for future reference.
Thank you for purchasing the AstroAI 4L Mirror Mini Fridge. This is a portable refrigerator that can be used with both a 12 Volt car and a standard wall outlet. With a built-in cooling and warming function, you can keep anything at the perfect temperature.
We hope you enjoy your new mini-fridge! Questions or concerns? You are welcome to contact us with your question via support@astroai.com.
Safety Information
- Please connect the device to a 220V power supply. (Different countries have different voltages. Please select the product that matches your actual situation when purchasing.)
- When using the 12V vehicle power supply, do not connect the refrigerator for a long time when the engine is off.
- Do not connect directly to the 24V cigarette lighter socket of heavy vehicles.
- Please unplug the device during thunderstorms when not in use for a long time to avoid damage to the device.
- Do not open or remove the cover, otherwise there is a danger.
- To prevent fire or electric shock, avoid overloading sockets, extension cords, or other devices that carry electrical loads.
- Use a suitable power source – follow the instructions in the manual or the marking on the product to connect the product to a suitable power source.
- The mains voltage should match the voltage on the manual and the nameplate of the device.
- To completely disconnect the device from the power supply, turn off the power supply and unplug the power adapter completely.
- Do not bend, stretch, or pull the power cord to avoid electric shock.
- The socket outlet must be easily accessible when installing the unit.
- Avoid use in places where dust or other air pollutants could be sucked into the fan.
- Do not place the refrigerator in poorly ventilated areas, such as the trunk of a car.
- Handle with care, do not squeeze, do not turn upside down.
- Do not sit on the refrigerator.
- Leave a distance of at least 5 cm from the back and sides of the unit to allow for air circulation and heat dissipation.
- Before switching from heating mode to cooling mode, please turn off the refrigerator for 30 minutes to allow it to return to room temperature, and vice versa.
- Do not expose the product to rain, keep it away from corrosive gases and liquids.
- If it is not applicable for a long time, please disconnect the power supply and store it in a dry and ventilated environment, avoid direct sunlight.
- Children are strictly prohibited from using it alone, and children should be used under the supervision of an adult.
Symbol Description
The diagram shows the different parts of the mini-fridge:
- (1) Handle
- (2) Door Lock
- (3) Light Bar
- (4) Light Bar Switch
- (5) Partition
- (6) Shelf
- (7) Cooling Indicator
- (8) Heating Indicator
- (9) Heating/Off/Cooling Switch
- (10) DC Power Connector
- (11) AC Power Connector
- (12) AC Power Cord
- (13) DC Power Cord
Size Description
The dimensions of the mini-fridge are approximately 13.5 cm (width) x 26.5 cm (height).
Operating Instructions
I. Operating Instructions for Use in Car
Recommendation: Do not tear off the protective film of the mirror if it is frequently used in the car to avoid dust discoloring the mirror.
- Before plugging the power cord into the socket, first turn the mode button to the OFF mode, i.e., the middle gear of the HOT/OFF/COLD switch. At this time, the two indicator lights will not be on.
- Plug the power cord into the DC power connector on the back of the refrigerator.
- Secure the refrigerator in the desired position and then plug the power cord into the car's power outlet.
- In cooling mode, the green indicator light will be on; in heating mode, the red indicator light will be on.
WARNING: Operating the refrigerator with the vehicle turned off can drain the vehicle's battery.
II. Steps for Home Operation
Recommendation: Please tear off the protective film on the mirror surface before use to avoid affecting the line of sight. Please pay attention to cleaning the mirror surface after long-term use to avoid affecting the use effect. For detailed mirror cleaning methods, please refer to the instructions.
- Before plugging the power cord into the socket, first turn the mode button to the OFF mode, i.e., the middle gear of the Heating/Off/Cooling switch. At this time, the two indicator lights will not be on.
- Plug the power cord into the AC power connector on the back of the refrigerator.
- Fix the refrigerator and plug the power cord into a normal wall outlet.
- In cooling mode, the green indicator light will be on; in heating mode, the red indicator light will be on.
- When using the mirror, you can touch the light bar switch to adjust the brightness.
Cooling Mode Notice
- To achieve the fastest cooling rate, please fill the refrigerator with chilled beverages.
- It can be used not only for cooling drinks but also for cooling your skincare products and cosmetics.
- The cooling effect is affected by the ambient temperature. Too high an ambient temperature can cause the minimum temperature the refrigerator can reach to rise.
Heating Mode Notice
- The refrigerator is designed to maintain the temperature of items. It is not designed to heat items.
- As long as the door is properly closed, hot items will remain warm for several hours after the refrigerator is closed.
Care and Maintenance
- Before performing routine maintenance, ensure that you have unplugged the unit completely.
- Please use a damp cloth and a neutral detergent to clean the housing.
- When not in use, ensure the interior is completely dry before storing.
- Please place the handle upwards and do not press it down.
Mirror Cleaning
- Use a hand sanitizer to wipe the mirror very cleanly.
- It is also effective to wipe with a soft cloth or gauze dipped in a little kerosene or wax.
- You can also wipe the mirror with a cloth dipped in milk.
- Apply soap to the mirror surface and wipe with a dry cloth.
- Cleaning with astringent lotions or detergents can also achieve a cleaning effect.
Troubleshooting
Issue | Solution |
Condensation |
|
Does not work |
|
Does not cool |
|
Poor heat dissipation |
|
The light bar does not light up |
|
Parameter Description
Mini Fridge | ||
Model | LY1904 | |
Capacity | 4 L | |
Input Voltage | DC12V | Cooling Mode: 40W Warming Mode: 32W |
AC100 - 120V (USA) | Cooling Mode: 0.7A 50 / 60 Hz Warming Mode: 0.63A 50 / 60 Hz |
|
AC100 - 110V (JP) | Cooling Mode: 50W 50 / 60 Hz Warming Mode: 40W 50 / 60 Hz |
|
AC200 -240V (DE/UK/FR/ES) | Cooling Mode: 50W 50 / 60 Hz Warming Mode: 40W 50 / 60 Hz |
|
Operating Temperature | 18-20°C lower than ambient temperature 140°F (60°C) Heat |
|
Certification | ETL / CE / PSE / UKCA / RoHS | |
Class II Construction | ☐ |
1 Year Limited Warranty
Each AstroAI 4L Mirror Mini Fridge is free from defects in material and workmanship. This warranty does not cover damage due to negligence, misuse, contamination, alteration, accident, or abnormal operating or handling conditions. This warranty is valid only for the original purchaser and is non-transferable.
AstroAI always aims to provide our customers with excellent products and customer service. To learn more about us, please visit astroai.com.