Eachine Wizard X220HV Quick Start Guide

Package Included

1 x X220HV frame kit
2 x 2306 1650KV brushless motor CW
2 x 2306 1650KV brushless motor CCW
1 x 4 IN 1 45A BLHeli_S ESC
1 x Customized F4 flight controller Built-in OSD
1 x Foxeer arrow mini pro 2.5mm 650TVL camera
1 x 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable
1 x 110DB BB alarm buzzer
1 x SpeedyBee bluetooth module
1 x 45mm RP-SMA male antenna RHCP
2 x 200*20mm battery strap
1 x 30° camera mount compatible with Runcam 3 3S Gopro session
2 x Dalprop cyclone T5046C transparent white CW
2 x Dalprop cyclone T5046C transparent white CCW
2 x Dalprop cyclone T5046C transparent purple CW
2 x Dalprop cyclone T5046C transparent purple CCW
10 x 2.5*100mm nylon strap black

A diagram shows the Eachine Wizard X220HV drone with various components labeled: SpeedyBee bluetooth module, 45mm RP-SMA male antenna RHCP, 2306 1650KV brushless motor, Foxeer arrow mini pro 2.5mm 650TVL camera, Dalprop Cyclone T5046C propeller, 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable, 110DB BB alarm buzzer, Customized F4 flight controller Built-in OSD, and 4 IN 1 45A BLHeli_S ESC.

1.0 Frame kit

Wheel base: 220mm
Upper plate thickness: 2.0mm
Frame arm thickness: 5.0mm
Bottom plate thickness: 3.0mm
X plate thickness: 1.5mm
Camera side plate thickness: 1.5mm
Camera standoffs: M3*28mm 1 PC
Frame standoffs: M3*20mm 8 PCS

A technical drawing illustrates the drone's frame structure, showing the arrangement of plates and arms.

2.0 Motor

Motor KV: 1650 RPM/V
Idle current(Io/10V): 1.05A
Lipo cell: 3-6S
Weight: 35g
Max continuous current: 36A
Max continuous power: 860W
Max thrust: 2350g
Configuration: 12N/14P
Stator diameter: 23mm
Stator thickness: 6mm
Motor diameter: 29mm
Motor body length: 18.4mm
Overall shaft length: 32.9mm
Prop adapter shaft: M5
Bolt holes spacing: 16mm
Bolt thread: M3
Propeller: 5-6 inch

Detailed technical drawings of the motor are provided, showing front, side, and rear views with dimensions indicated. Key dimensions include stator thickness (6mm), motor diameter (29mm), motor body length (18.4mm), and overall shaft length (32.9mm). The prop adapter shaft is M5, bolt holes spacing is 16mm, and bolt thread is M3. Recommended propellers are 5-6 inch.

3.0 ESC

Integrated PDB
Working voltage: 2-6S Lipo
Continuous working current: 4*45A
Peak current: 4*50A (6S)
Main control chip: 48Mhz EFM8BB2
Firmware: BLHeli_S Supports Dshot600
MOS: 5*6

An image displays the Integrated PDB ESC board, showing its component layout and connectors.

4.0 Flight controller

Main control chip: STM32F405
Sensor: MPU6000 6 axes
Power supply: 5V
Integrated OSD
LC filter on board
Supports BetaFlight / inav running firmware

An image displays the Customized F4 flight controller board, showing its component layout and connectors.

5.0 Antenna

Brand name: Eachine
Item name: antenna
Quantity: 1 PC
Connector: RP-SMA Male

An image shows the RP-SMA male antenna.

6.0 Switchable VTX

Output power and transmission distance: ≥0.5km@25mW, ≥1km to 200mW, ≥2km to 600mW
Transmission power: 0mW / 25mW / 200mW / 600mW
Full video format: NTSC/PAL
Input voltage and power dissipation: 7V ~ 24V, + 12V / 260mA @ 600mW
Size: 36*36*6mm
Weight: 7g (excluding antenna)
Features: With output power self-check function.
SCAN modes: Nixie tube SCAN: frequency point (1-8), frequency band (AE), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)

7.0 Camera

Solution: 1/3" Sony SUPER HAD II CCD + Nextchip 2040 DSP
Pixel: PAL: 976(H)x494(V)
TV system: PAL
Resolution: 600TVL(color) 650TVL(B&W)
Synchronization: internal
Min.illumination: 0.01Lux
WDR: support
DNR: 2D DNR
White Dot repair: support
OSD programming board: support
Camera title: support
Image adjustment: support
OSD features: Edit name, power, flying time
Input power: 5-40V
Storage temperature: -40℃~60℃
Working temperature: -10℃~50℃
Power consumption: 70mA
Low voltage alarm: support
Preset mode: DEF, VIVID, SUNNY, CLOUDY, LED TR, USR1
Size: 21.8x21.8mm
Weight: 8.7g(excluding bracket)

An image of the camera is shown, with annotations indicating lens options: 1.8mm M12 (FOV-D 150°) and 2.5mm M12 (FOV-D 130°).

8.0 SpeedyBee bluetooth module

Support: Betaflight configurator
Speedybee App compatibility: iOS 10.0+; iPhone 4S, iPad3; Android 4.3+
Output power: 0dBM
Sensitivity: -94dBM
External interface: BROADCAST SWITCH, TX, RX, 3-5V DC Input, GND
Transmission speed: Bidirectional 1K/S
Bluetooth protocol: Bluetooth Specification V4.0 BLE
Transmission distance: 30 meters
Frequency range: 2400MHz-2483.5MHz (2.4G ISM Band)
Baud rate: 2400, 4800, 9600, 14400, 19200(default), 28800, 38400, 57600, 76800, 115200, 230400
Working voltage: 3.3V-5.0V
Working current: 8.3mA-10mA
Weight: 1.4g
Size: 27*15*4.5mm

A diagram illustrates the SpeedyBee bluetooth module, detailing its internal components and external connections. The pinout is shown as: GND, 3.3-5V, RX, TX, BLE Switch. An LED indicator is described: Blue and constantly on when connected; not lit when disconnected.

9.0 110DB BB alarm buzzer

Working voltage: 5V
Standby battery: lipo 4.2V 100mah
Loudness: 110DB
Size: 36 * 36mm
Weight: 8g

10.0 Motor Unlock/lock

Motor Unlock: Put the throttle rocker at the lowest point, move the rudder rocker to the right and keep it for more than 2 seconds. The blue state indicator is always on, indicating the motor is unlocked.

Two diagrams show transmitter stick positions for motor control. For Motor Unlock: the throttle rocker is at the lowest point, and the rudder rocker is moved to the right for over 2 seconds, indicated by a blue state indicator.

Motor lock: Put the throttle rocker at the lowest point, move the rudder rocker to the leftmost side, and the red state indicator is always turned on to lock the motor. At this time, pushing the throttle rocker upward will not rotate the motor.

Two diagrams show transmitter stick positions for motor control. For Motor Lock: the throttle rocker is at the lowest point, and the rudder rocker is moved to the leftmost side, indicated by a red state indicator, preventing upward throttle movement from rotating the motor.

11.0 Traversing flight

A diagram depicts a drone's flight path, showing a series of pylons or markers arranged in a curved path, illustrating a traversing flight scenario.

1. Flying is more suitable for experienced pilots.
2. During the flight, please keep the flight within the video receiving range (the actual range depends on the flight environment and weather conditions).
3. During flight, please avoid crowds, animals, and high voltage wires and other obstacles.

	Eachine Wizard TS130 FPV Drone Quick Start Guide A concise guide to setting up and operating the Eachine Wizard TS130 FPV drone, covering frame kit, motor, ESC, flight controller, VTX, camera, and basic flight procedures.
	Eachine Wizard X220HV FPV Drone Quick Start Guide Quick start guide for the Eachine Wizard X220HV FPV drone, detailing package contents, component specifications, and basic operation instructions for pilots.
	Eachine Wizard X220HV FPV Racing Drone Quick Start Guide This quick start guide provides essential information for setting up and operating the Eachine Wizard X220HV FPV racing drone. It details the package contents, specifications for key components like the frame, motors, ESC, flight controller, VTX, camera, and Bluetooth module, along with basic flight instructions and safety tips.
	Eachine X220 V3 FPV Racing Drone Quick Start Guide A comprehensive quick start guide for the Eachine X220 V3 FPV racing drone, detailing package contents, component specifications, and initial setup procedures using the Betaflight configurator.
	Eachine Tyro99 210mm DIY FPV Racing Drone - Build Your Own FPV Racer Explore the Eachine Tyro99, a 210mm DIY FPV racing drone kit designed for enthusiasts. This package includes all essential components for building a high-performance FPV quadcopter, featuring a carbon fiber frame, powerful 2206 2150KV motors, a 4-in-1 30A BLHeli_S ESC, and an F4 flight controller with integrated OSD. Perfect for learning and competitive FPV racing.
	Eachine Wizard X220 V2 FPV Drone Wiring Diagram Detailed wiring diagram for the Eachine Wizard X220 V2 FPV Racing Drone, illustrating connections between the flight controller, ESC, motors, camera, and other components.
	Eachine X220 v2 FPV Racing Drone User Manual and Flight Guide Comprehensive user manual and flight guide for the Eachine X220 v2 FPV Racing Drone, covering setup, operation, safety, battery management, and advanced features. Includes details on the Flysky FS-i6X remote control and other components.
	Eachine Novice-IV 3-4S Brushless Long Range FPV Drone User Manual Comprehensive user manual for the Eachine Novice-IV 3-4S Brushless Long Range FPV Drone, covering installation, setup, flight controls, advanced functions, and firmware updates.