This document provides a quick start guide for the Eachine Wizard X220HV FPV drone.
The drone is depicted as a quadcopter with four propellers, a central frame, and various electronic components.
Package Included
- 1 x X220HV frame kit
- 2 x 2306 1650KV brushless motor CW
- 2 x 2306 1650KV brushless motor CCW
- 1 x 4 IN 1 45A BLHeli_S ESC
- 1 x Customized F4 flight controller Built-in OSD
- 1 x Foxeer arrow mini pro 2.5mm 650TVL camera
- 1 x 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable
- 1 x 110DB BB alarm buzzer
- 1 x SpeedyBee bluetooth module
- 1 x 45mm RP-SMA male antenna RHCP
- 2 x 200*20mm battery strap
- 1 x 30° camera mount compatible with Runcam 3 3S Gopro session
- 2 x Dalprop cyclone T5046C transparent white CW
- 2 x Dalprop cyclone T5046C transparent white CCW
- 2 x Dalprop cyclone T5046C transparent purple CW
- 2 x Dalprop cyclone T5046C transparent purple CCW
- 10 x 2.5*100mm nylon strap black
A diagram illustrates the drone with labels pointing to key components such as the SpeedyBee bluetooth module, 2306 1650KV brushless motor, Foxeer arrow mini pro camera, 45mm RP-SMA male antenna, Dalprop Cyclone T5046C propeller, 5.8G VTX, 110DB BB alarm buzzer, Customized F4 flight controller, and 4 IN 1 ESC.
1.0 Frame kit
Wheel base: 220mm
Upper plate thickness: 2.0mm
Frame arm thickness: 5.0mm
Bottom plate thickness: 3.0mm
X plate thickness: 1.5mm
Camera side plate thickness: 1.5mm
Camera standoffs: M3*28mm 1 PC
Frame standoffs: M3*20mm 8 PCS
A diagram shows the drone frame structure.
2.0 Motor
Motor KV: 1650 RPM/V
Idle current (Io/10V): 1.05A
Lipo cell: 3-6S
Weight: 35g
Max continuous current: 36A
Max continuous power: 860W
Max thrust: 2350g
Configuration: 12N/14P
Stator diameter: 23mm
Stator thickness: 6mm
Motor diameter: 29mm
Motor body length: 18.4mm
Overall shaft length: 32.9mm
Prop adapter shaft: M5
Bolt holes spacing: 16mm
Bolt thread: M3
Propeller: 5-6 inch
Diagrams show the motor from top, side, and rear views, with dimensions indicated.
3.0 ESC
Integrated PDB
Working voltage: 2-6S Lipo
Continuous working current: 4*45A
Peak current: 4*50A (6S)
Main control chip: 48Mhz EFM8BB2
Firmware: BLHeli_S Supports Dshot600
MOS: 5*6
Diagrams show the top and bottom views of the ESC board.
4.0 Flight controller
Main control chip: STM32F405
Sensor: MPU6000 6 axes
Power supply: 5V
Integrated OSD
LC filter on board
Supports BetaFlight / inav running firmware
Diagrams show the top and bottom views of the flight controller board.
5.0 Antenna
Brand name: Eachine
Item name: antenna
Quantity: 1 PC
Connector: RP-SMA Male
An image shows the RP-SMA male antenna.
6.0 Switchable VTX
Output power and transmission distance: ≧0.5km@25mW, ≧1km to 200mW, ≧2km to 600mW
Transmission power: 0mW / 25mW / 200mW / 600mW
Full video format: NTSC / PAL
Input voltage and power dissipation: 7V ~ 24V, + 12V / 260mA @ 600mW
Size: 36*36*6mm
Weight: ≦ 7g (excluding antenna)
Features output power self-check function.
Nixie tube SCAN: frequency point (1-8), frequency band (AE), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)
7.0 Camera
Solution: 1/3" Sony SUPER HAD II CCD + Nextchip 2040 DSP
Pixel: PAL: 976(H)x494(V)
TV system: PAL
Resolution: 600TVL(color) 650TVL(B&W)
Synchronization: internal
Min. illumination: 0.01Lux
WDR: support
OSD programming board: support
White Dot repair: support
DNR: 2D DNR
Camera title: support
Image adjustment: support
OSD: Edit name, power, flying time
Input power: 5-40V
Storage temperature: -40℃~60℃
Working temperature: -10℃~50℃
Power consumption: 70mA
Low voltage alarm: support
Preset mode: DEF, VIVID, SUNNY, CLOUDY, LED TR, USR1
Size: 21.8x21.8mm
Weight: 8.7g (excluding bracket)
An image shows the camera with specifications for Field of View (FOV) for different lens options (1.8mm M12 FOV-D 150°, 2.5mm M12 FOV-D 130°).
8.0 SpeedyBee bluetooth module
Support Betaflight configurator
Speedybee App: iOS 10.0+; iPhone 4S, iPad3; Android 4.3+
Output power: 0dBM
Sensitivity: -94dBM
External interface: BROADCAST SWITCH, TX, RX, 3-5V DC Input, GND
Transmission speed: Bidirectional 1K/S
Bluetooth protocol: Bluetooth Specification V4.0 BLE
Transmission distance: 30 meters
Frequency range: 2400MHz-2483.5MHz (2.4G ISM Band)
Baud rate: 2400, 4800, 9600, 14400, 19200 (default), 28800, 38400, 57600, 76800, 115200, 230400
Working voltage: 3.3V-5.0V
Working current: 8.3mA-10mA
Weight: 1.4g
Size: 27*15*4.5mm
A diagram shows the module's connector pins (GND, 3.3-5V, RX, TX, BLE Switch) and an LED indicator.
LED Indicator: Blue and constantly on when being connected. LED does not light means it is not connected.
9.0 110DB BB alarm buzzer
Working voltage: 5V
Standby battery: lipo 4.2V 100mah
Loudness: 110DB
Size: 36 * 36mm
Weight: 8g
10.0 Motor Unlock/lock
Motor Unlock
Put the throttle rocker at the lowest point, move the rudder rocker to the right and keep it for more than 2 seconds. The blue state indicator is always on, that is unlock the motor. ? [Left-hand throttle diagram shows rudder rocker moving right]
Motor lock
Put the throttle rocker at the lowest point, move the rudder rocker to the leftmost side, and the red state indicator is always turned on to lock the motor. At this time, pushing the throttle rocker motor upward will not rotate. ? [Left-hand throttle diagram shows rudder rocker moving left]
11.0 Traversing flight
Tips for traversing flight:
- Flying is more suitable for experienced pilots.
- During the flight, please keep the flight within the video receiving range (the actual range depends on the flight environment and weather conditions).
- During flight, please avoid crowd, animals and high voltage wires and other obstacles.
A simplified diagram shows a figure flying with multiple 'A' symbols representing obstacles or points of interest.
