Package Included:
- 1 x X220HV frame kit
- 2 x 2306 1650KV brushless motor CW
- 2 x 2306 1650KV brushless motor CCW
- 1 x 4 IN 1 45A BLHeli_S ESC
- 1 x Customized F4 flight controller Built-in OSD
- 1 x Foxeer arrow mini pro 2.5mm 650TVL camera
- 1 x 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable
- 1 x 110DB BB alarm buzzer
- 1 x SpeedyBee bluetooth module
- 1 x 45mm RP-SMA male antenna RHCP
- 2 x 200*20mm battery strap
- 1 x 30° camera mount compatible with Runcam 3 3S Gopro session
- 2 x Dalprop cyclone T5046C transparent white CW
- 2 x Dalprop cyclone T5046C transparent white CCW
- 2 x Dalprop cyclone T5046C transparent purple CW
- 2 x Dalprop cyclone T5046C transparent purple CCW
- 10 x 2.5*100mm nylon strap black
Drone Component Diagram: A detailed illustration of the drone identifies key components including the SpeedyBee bluetooth module, 2306 1650KV brushless motor, Foxeer arrow mini pro 2.5mm 650TVL camera, 45mm RP-SMA male antenna RHCP, Dalprop Cyclone T5046C propeller, 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable, 110DB BB alarm buzzer, Customized F4 flight controller Built-in OSD, and 4 IN 1 45A BLHeli_S ESC.
1.0 Frame Kit
Specifications:
- Wheel base: 220mm
- Upper plate thickness: 2.0mm
- Frame arm thickness: 5.0mm
- Bottom plate thickness: 3.0mm
- X plate thickness: 1.5mm
- Camera side plate thickness: 1.5mm
- Camera standoffs: M3*28mm (1 PC)
- Frame standoffs: M3*20mm (8 PCS)
Frame Diagram: An isometric view of the drone's frame structure, showing the wheel base, plate thicknesses, and standoff details.
2.0 Motor
Specifications:
- Motor KV: 1650 RPM/V
- Idle current (Io/10V): 1.05A
- Lipo cell: 3-6S
- Weight: 35g
- Max continuous current: 36A
- Max continuous power: 860W
- Max thrust: 2350g
- Configuration: 12N/14P
- Stator diameter: 23mm
- Stator thickness: 6mm
- Motor diameter: 29mm
- Motor body length: 18.4mm
- Overall shaft length: 32.9mm
- Prop adapter shaft: M5
- Bolt holes spacing: 16mm
- Bolt thread: M3
- Propeller compatibility: 5-6 inch
Motor Diagrams: Three views of the motor are provided: a front view showing the propeller mount, a side view with dimensions, and a rear view indicating mounting holes.
3.0 ESC
Specifications:
- Integrated PDB
- Working voltage: 2-6S Lipo
- Continuous working current: 4*45A
- Peak current: 4*50A (6S)
- Main control chip: 48Mhz EFM8BB2
- Firmware: BLHeli_S
- Supports Dshot600
- MOS: 5*6
ESC Diagrams: Top and bottom views of the ESC board are shown, detailing component layout.
4.0 Flight Controller
Specifications:
- Main control chip: STM32F405
- Sensor: MPU6000 6 axes
- Power supply: 5V
- Integrated OSD
- LC filter on board
- Supports BetaFlight / iNav running firmware
Flight Controller Diagrams: Top and bottom views of the F4 flight controller board are presented, with labels for ports (e.g., RSSI, CAM, GND, IO, BOOT) and components.
5.0 Antenna
Specifications:
- Brand name: Eachine
- Item name: antenna
- Quantity: 1 PC
- Connector: RP-SMA Male
Antenna Image: A close-up of the RP-SMA male antenna connector is displayed.
6.0 Switchable VTX
Specifications:
- Output power and transmission distance: ≥0.5km@25mW, ≥1km to 200mW, ≥2km to 600mW
- Transmission power: 0mW / 25mW / 200mW / 600mW
- Full video format: NTSC / PAL
- Input voltage and power dissipation: 7V ~ 24V, + 12V / 260mA @ 600mW
- Size: 36*36*6mm
- Weight: ≤ 7g (excluding antenna)
- Features: Output power self-check function.
- Nixie tube SCAN: frequency point (1-8), frequency band (AE), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)
7.0 Camera
Specifications:
- Solution: 1/3" Sony SUPER HAD II CCD + Nextchip 2040 DSP
- Pixel: PAL: 976(H)x494(V)
- TV system: PAL
- Resolution: 600TVL (color) / 650TVL (B&W)
- Synchronization: internal
- Min. illumination: 0.01Lux
- WDR: support
- OSD programming board: support
- White Dot repair: support
- DNR: 2D DNR
- Camera title: support
- Image adjustment: support
- OSD features: Edit name, power, flying time
- Input power: 5-40V
- Storage temperature: -40℃~60℃
- Working temperature: -10℃~50℃
- Power consumption: 70mA
- Low voltage alarm: support
- Preset modes: DEF, VIVID, SUNNY, CLOUDY, LED TR, USR1
- Size: 21.8x21.8mm
- Weight: 8.7g (excluding bracket)
Camera Image: An image of the camera module is shown, indicating dimensions and Field of View (FOV) angles for 1.8mm M12 (FOV-D 150°) and 2.5mm M12 (FOV-D 130°) lenses.
8.0 SpeedyBee Bluetooth Module
Specifications:
- Compatibility: Supports Betaflight configurator, Speedybee App (iOS 10.0+; iPhone 4S, iPad3; Android 4.3+)
- Output power: 0dBM
- Sensitivity: -94dBM
- External interface: BROADCAST SWITCH, TX, RX, 3-5V DC Input, GND
- Transmission speed: Bidirectional 1K/S
- Bluetooth protocol: Bluetooth Specification V4.0 BLE
- Transmission distance: 30 meters
- Frequency range: 2400MHz-2483.5MHz (2.4G ISM Band)
- Baud rates: 2400, 4800, 9600, 14400, 19200 (default), 28800, 38400, 57600, 76800, 115200, 230400
- Working voltage: 3.3V-5.0V
- Working current: 8.3mA-10mA
- Weight: 1.4g
- Size: 27*15*4.5mm
Module Diagram: A diagram illustrates the SpeedyBee Bluetooth module, showing the USB connector, PCB layout, and pinouts (GND, 3.3-5V, RX, TX, BLE Switch). The LED status is also described: Blue and constantly on when connected; LED does not light means it is not connected.
9.0 110DB BB Alarm Buzzer
Specifications:
- Working voltage: 5V
- Standby battery: lipo 4.2V 100mah
- Loudness: 110DB
- Size: 36 * 36mm
- Weight: 8g
10.0 Motor Unlock/Lock
Motor Unlock Procedure: Place the throttle rocker at the lowest point. Move the rudder rocker to the right and hold for more than 2 seconds. The blue state indicator will be constantly on, indicating the motor is unlocked.
Motor Lock Procedure: Place the throttle rocker at the lowest point. Move the rudder rocker to the leftmost side. The red state indicator will be constantly on, indicating the motor is locked. At this point, pushing the throttle rocker upward will not cause the motor to rotate.
Control Diagrams: Diagrams illustrate the transmitter's control sticks (throttle, rudder, elevator) for performing the motor unlock and lock procedures.
11.0 Traversing Flight
Flight Path Diagram: A diagram depicts a drone flying a course marked by gates, with a figure indicating the starting point.
Flight Advice:
- Flying is more suitable for experienced pilots.
- During flight, please keep the flight within the video receiving range (the actual range depends on the flight environment and weather conditions).
- During flight, please avoid crowds, animals, high voltage wires, and other obstacles.
