Eachine Tyro99 210mm DIY Version FPV Racing RC Drone
The Eachine Tyro99 is a 210mm DIY FPV racing drone kit, offering enthusiasts the opportunity to build and customize their own high-performance quadcopter.
Product Overview
A visual representation shows a quadcopter with orange accents on its arms and propellers, featuring a central frame housing electronic components.
Price: AU$224.14 (GST Included)
Availability: In stock. Only 1 piece remaining. Ships within 24 hours.
Shipping: Free, 1-week delivery to Australia.
Estimated Delivery: September 1st, 2021.
Payment Options: Multiple payment options available, including interest-free installments.
Additional Offers: AU$2.85 New User Discount available.
Key Features
- DIY Version: Requires assembly, allowing for a hands-on building experience.
- 210mm Frame Size: Suitable for FPV racing and freestyle flying.
- High-Performance Components: Built with quality parts for optimal flight characteristics.
- FPV Ready: Equipped with camera and VTX for immersive first-person view flying.
Specifications
Frame Kit
| Specification | Details |
|---|---|
| Wheelbase | 210mm |
| Arm Thickness | 5mm |
| Bottom Plate Thickness | 2mm |
| Side Plate Thickness | 2mm |
| Material | 3K carbon fiber & 6065 aluminium |
Motor
| Specification | Details |
|---|---|
| Model | Eachine 2206 2150KV Brushless Motor |
| KV Rating | 2150RPM/V |
| Lipo Cell Support | 3-5S |
| Weight | 31g |
| Max Continuous Current | 31A |
| Max Thrust | 1050g (4S/5" propeller) |
ESC (Electronic Speed Controller)
| Specification | Details |
|---|---|
| Type | 4 IN 1 30A BLHeli_S ESC |
| Continuous Current | 30A |
| Burst Current | 40A (10S) |
| Input Voltage | 2-5S LiPo |
| BEC Output | 5V 2A |
| Firmware | BLHeli_S, Dshot600 compatible |
Flight Controller
| Specification | Details |
|---|---|
| Model | New F4 Flight Controller |
| Main Control Chip | STM32F405 |
| Sensor | ICM20602 |
| Power Supply | 5V |
| Onboard Features | Integrated OSD, Onboard LC filter |
| Performance | PID cycle rate & gyroscope refresh rate up to 32Khz |
| Firmware Support | BetaFlight / iNav |
VTX (Video Transmitter)
| Specification | Details |
|---|---|
| Type | 5.8G 48CH 200mW VTX |
| Output Power | 200mW |
| Input Voltage | 7V-24V |
| Video Format | NTSC/PAL |
| Size | 20*30*9mm |
| Weight | ≤7g (excluding antenna) |
Camera
| Specification | Details |
|---|---|
| Model | 700TVL CMOS Camera |
| Lens | Standard 2.8mm |
| Resolution | 700TVL |
| Size | 25mm*25mm |
| Weight | 9.5g |
Propellers
| Specification | Details |
|---|---|
| Model | Racerstar 5040 2 Blade Propeller |
| Quantity | 2 CW & 2 CCW |
| Material | PC (Polycarbonate) |
| Mounting Hole | 5mm |
| Available Colors | Blue, Red, Yellow, Purple, White (delivery color is random) |
Package Contents
- 1 x 210mm frame kit
- 2 x 2206 2150KV brushless motor CW
- 2 x 2206 2150KV brushless motor CCW
- 1 x 4 IN 1 30A BLHeli_S ESC
- 1 x New F4 flight controller
- 1 x 700TVL CMOS camera
- 1 x New VTX
- 2 x Battery strap
- 2 x Racerstar 5038 2 blade propeller CW
- 2 x Racerstar 5038 2 blade propeller CCW
Important Notes for DIY Assembly
- This product is a DIY version and requires assembly by the user.
- Crucially, ensure the antenna is properly installed at the output end before powering up the VTX to prevent damage to internal components.
- Always verify that the input voltage is within the specified range (7V-24V for VTX, 2-5S for ESC) to avoid component damage.
- If replacing the antenna, select one with a good standing wave ratio and adequate gain for optimal transmission distance.
- Exercise caution and follow proper procedures during transportation and installation to protect components.
- The approximate take-off weight of the assembled drone is 450g.
External Link
For more details and purchasing information, visit the official product page:
