KRANBALK Ceiling Lamp
By IKEA
Important Safety Information
For indoor use only.
IMPORTANT: If you encounter any issues with the electrical installation, please contact a qualified electrician. Always ensure the power to the circuit is shut off before commencing any installation work.
Parts Included
The following parts are included with your KRANBALK ceiling lamp:
- 3x Lamp Shades (circular)
- 3x Mounting Rings (threaded)
- 3x Base Plates (for lamp arms)
Product Code: AA-2476356-3
Part Identifier: 10119558
Assembly Instructions
Step 1: Prepare the Base
Attach the main lamp body to the base. Ensure it is correctly oriented. Avoid incorrect assembly.
Step 2: Attach Lamp Arms
Insert the lamp arms into the designated sockets on the main body. Rotate them to secure them in place.
Step 3: Secure Lamp Arm Components
For each lamp arm, attach a base plate and then a threaded mounting ring. These components are secured by rotating them clockwise.
Step 4: Install Light Bulbs
Screw three light bulbs into the sockets located at the end of each lamp arm. Rotate until snug.
Step 5: Attach Lamp Shades
Place the circular lamp shades onto the mounting rings at the end of each arm. Rotate the shades clockwise to secure them.
Step 6: Connect to Ceiling Fixture
Connect the main lamp body assembly to the ceiling electrical box or mounting bracket. Insert the threaded rod from the lamp into the ceiling fixture and secure it with a rotation.
Step 7: Electrical Connections
Connect the electrical wires from the lamp to the corresponding wires in the ceiling junction box using appropriate connectors.
Step 8: Secure to Ceiling
Secure the lamp assembly to the ceiling mounting bracket. This involves a locking motion as indicated by arrows.
Step 9: Final Attachment
Complete the final attachment of the lamp to the ceiling. This step involves securing the main canopy or mounting plate to the ceiling fixture, often with a twist-and-lock mechanism.
