SINNERLIG

Important Safety Instructions

FOR INDOOR USE ONLY.

Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.

CAUTION!

The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.

WARNING

Deviation from the assembly instructions may result in a risk of fire or electric shock.

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Always disconnect the transformer/charger before cleaning the product.

Do not immerse in water.

Use a damp cloth, never a strong cleaning agent.

Additional Safety Information

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

This decorative item is not intended for use by people (including children) whose physical, sensory or mental capabilities are different or reduced, or who lack experience or knowledge, unless they are otherwise supervised. Children must be supervised to ensure that items are not used as toys.

CAUTION and mind the following. To reduce the risk of fire and electric shock:

• Disconnect decorative item from power source before performing any maintenance or cleaning activity.
• Do not place or hang near gas installations or electric heaters, fireplaces, candles, or other similar heating sources.
• Disconnect the item when leaving the house, going to bed, or if left unattended.
• Do not cover decorative item with fabric, paper or any material that is not part of the product when it is being used.
• Do not use decorative item outdoors.

SAVE THESE INSTRUCTIONS

Assembly Instructions

Parts List:

• 1x Metal support frame
• 1x Cylindrical decorative shade with a textured pattern
• 1x Base unit with a power input port
• 1x USB to micro-USB cable

Assembly Steps:

1. Step 1: Attach the metal support frame to the base unit. Arrows indicate inserting the frame's prongs into the base. A magnified view shows the connection point.
2. Step 2: Shows the frame correctly attached to the base. Arrows indicate alignment and connection.
3. Step 3: Separate the decorative shade from the main body. Arrows indicate lifting the shade upwards and then placing it onto the main body.
4. Step 4: Place the main body onto the base unit. A magnified view shows a connector on the main body being inserted into a port on the base. Arrows indicate downward insertion.
5. Step 5: The assembled lamp structure is shown.
   • Sub-diagram A: Two circular buttons on the base unit are pressed, with "Click!" indicated, suggesting a locking mechanism.
   • Sub-diagram B: Shows two power options:
     • Option 1 (labeled '13'): Inserting three AA batteries (?) into the base unit.
     • Option 2 (labeled '16'): Connecting the USB cable (?) to the base unit.
6. Step 6: Battery compartment details.
   • A screw is shown being removed from the battery compartment cover using a screwdriver (?).
   • The compartment cover is lifted (⬆️).
   • Three AA batteries (?) are inserted into the compartment, with plus (+) and minus (-) terminals clearly marked and aligned correctly. A diagram shows correct battery insertion (AA +) and incorrect insertion (❌).
   • The compartment cover is replaced and secured with a screw.

Operation and Maintenance

The lamp can be powered by batteries or a USB cable.

Battery Power: Insert 3x IKEA LADDA HR6 AA 1.2V 2450 mAh batteries. Ensure correct polarity.

USB Power: Connect the included USB cable (?) to the base unit and a suitable power source (e.g., USB adapter, computer). The lamp will illuminate (?). A charging time of 10-12 hours (⏰) is indicated for battery-powered operation.

Light Control: The lamp can be turned on/off and dimmed by operating the button on the base unit (indicated by an arrow toggling between a dark bulb ? and a bright bulb ?).

Maintenance: Use a damp cloth for cleaning. Do not use strong cleaning agents.

Disposal: Do not incinerate the product. Dispose of used batteries in compliance with local regulations.

Important Note: This product is for indoor use only. Do not use in damp locations (?❌).

Distributor Information

MX

Importador/Distribuidor: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310.

Read and follow all safety and operation instructions before using this product. For Indoor Use. Consult electrical specifications on the product label.

General Warnings

⚠️ Deviation from assembly instructions may result in fire or electric shock.

This device complies with FCC Part 15. Operation is subject to two conditions: no harmful interference, and acceptance of any interference received.

Unauthorized modifications can void the user's authority to operate the equipment.

Do not disassemble the product; LED diodes can cause eye damage.

Do not place or hang near gas installations or electric heaters, fireplaces, candles, or other similar heating sources.

Disconnect the product when leaving unattended, going to bed, or when not in use.

Do not cover the product with fabric, paper, or other materials not part of the product.