Resistex Doled LED Luminaire

Dimensions and Size

The Resistex Doled luminaire is available in three sizes, specified by the required cutout diameter:

• Diameter Ø155 mm
• Diameter Ø160 mm
• Diameter Ø195 mm

Detailed dimension drawings illustrate the fixture's height, depth, and the specific cutout diameters for each model.

Installation Instructions

Safety Notes

• [Warning Symbol] Never work on the luminaire when it is live (voltage present).
• Installation must be performed by a professional installer, adhering to all relevant electrical installation standards and regulations.
• Handle with care to avoid electrostatic discharges (ESD Norm).
• Please observe the notes and steps described in the mounting instructions.

Mounting Steps

1. Step 1: Position the luminaire into the prepared ceiling cutout.
2. Step 2: Fold the mounting clips inwards towards the center of the fixture.
3. Step 3: Connect the electrical wiring. Ensure correct connection to the 'L' (Live) and 'N' (Neutral) terminals for ON/OFF control.
4. Step 4: Secure the luminaire in place.
5. Step 5: Fold the mounting clips outwards, away from the center, to grip the ceiling material.
6. Step 6: Gently push the luminaire into the ceiling until it is flush.
7. Step 7: Final wiring connection check. Note the visual indicators: ✔️ for correct connection, ❌ for incorrect connection. The luminaire is marked 'NON RECOUVRABLE', indicating it is not designed to be covered by thermal insulation material.
8. Step 8: The luminaire is now installed and ready for use.

Maintenance Instructions

• Do not use chemical or abrasive cleaning products on the fixture.
• Keep these instructions for future reference, including dismantling or maintenance.
• Additional information on Resistex luminaires is available on the website: www.resistex-sa.com.
• Resistex cannot be held responsible for any misuse of the product.

Company Information and Specifications

Manufacturer: RESISTEX EXPLOITATION

Address: 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Contact: Tel: 04 93 276 276 | Fax: 04 93 276 280 | Email: contact@resistex-sa.com

Company Registration: APE 2740Z | Siret 487 593 477 00010 | SAS CAPITAL 649979 € | TVA FR 73 487 593 477

Specifications & Certifications: ROHS compliant, Classe II electrical safety, CE marked. Operating temperature up to 105°C. Marked 'NON RECOUVRABLE' (not suitable for covering with insulation).