Marta MT-FN2536 Stand Fan

Product Overview

This document provides instructions for the Marta MT-FN2536 Stand Fan. It includes details on assembly, operation, cleaning, maintenance, and safety precautions. The manual is provided in multiple languages, including Russian, Kazakh, and English.

Parts List

The fan components are listed in Russian, Kazakh, and English:

• Housing (Корпус, Корпус)
• Control Panel (Панель управления, Басқару панелі)
• Handle for moving (Ручка для перемещения, Жылжытуға арналған тұтқа)
• Air blowing holes (Отверстия выдува воздуха, Ауа үрлеу тесіктері)
• Air intake holes (Отверстия забора воздуха, Ауа жинау тесіктері)
• Base (Опора, Діңгек)
• Timer knob (Ручка таймера, Таймер тұтқасы)
• Air flow rate selection knob with and without rotation function (Ручка выбора скорости потока воздуха с функцией вращения и без, Ауа ағынының жылдамдығын таңдау тұтқасы айналу функциясы бар және жоқ)

Safety Precautions

Please read the following safety instructions carefully before operating the appliance and save them for future reference:

• Ensure the appliance is fully assembled before use.
• Always place the fan on a stable, flat, and dry surface.
• Do not attempt to repair the appliance yourself. Contact a qualified service center for any issues.
• Do not use the appliance with a damaged power cord or plug.
• Keep the power cord away from sharp edges and hot surfaces. Do not pull, twist, or wrap the cord around the fan body.
• Never immerse the appliance in water or other liquids to avoid electric shock or fire.
• Always unplug the appliance before cleaning or when not in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed by a responsible person.
• Keep hands, hair, and foreign objects away from moving parts and grilles. Do not block air inlets or outlets.
• Do not operate the fan without protective grilles.

Assembly

The fan is supplied disassembled. Before assembly, check that all parts are present and undamaged.

1. Remove the fan from the packaging and remove any stickers that may hinder operation.
2. Place the power cord between the two halves of the base. Align the guides on one base half with the holes on the other and secure them with latches.
3. Attach the assembled base to the bottom of the fan body using the four screws. Secure the power cord in the base channel using the plastic retainer and two screws.

Using the Device

Operation Modes:

• To turn on the fan, rotate the air flow rate selection knob to one of the following positions: 1 - minimum speed, 2 - medium speed, 3 - maximum speed.
• To enable oscillation, push the oscillation button down. To stop oscillation, pull the button up.
• To use the fan with the timer, set the desired shut-off time by turning the timer knob (up to 120 minutes).
• To use the fan without the timer, turn the timer knob to the 'ON' position.
• To turn off the fan, turn both knobs to the 'OFF' position and unplug the unit from the power outlet.

Cleaning and Maintenance

• Always unplug the appliance before cleaning.
• Do not use chemical or abrasive cleaners.
• For seasonal storage, cover the fan with its original carton.
• To clean the fan blades and grilles, use a cloth slightly dampened with soapy water.
• Do not immerse the appliance or its motor housing in water.

Technical Specifications

Warranty Information

The warranty does not cover consumables such as filters, ceramic and non-stick coatings, rubber seals, etc.

The production date can be found on the serial number sticker on the product box and/or the device itself. The serial number consists of 13 characters, where the 4th and 5th characters indicate the month, and the 6th and 7th indicate the year of production.

The manufacturer reserves the right to change the product's complete set, appearance, country of manufacture, warranty, and technical characteristics without prior notice. Please check at the time of purchase.

Current information about service centers is available at: http://multimarta.com/

Manufacturer and Importer Information

Manufacturer: Cosmos Far View International Limited, Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China. Made in China.

Russian Distributor: OOO "Valeriya", 188670, Russia, Leningradskaya Oblast, Vsevolozhsky District, territory PR Sputnik, Tsentralnaya Street, building 58A, premise 419A, tel/fax 8(812) 325-23-34

Russian Importer/Authorized Representative: OOO "Briz", Russia, 194156, Saint Petersburg, Bolshoy Sampsonievskiy Prospekt, building 93, litera A, premise 7-N, office 5, tel/fax 8(812) 325-23-48