Marta MT-FN2554 Stand Fan User Manual

Product Overview

The Marta MT-FN2554 is a stand fan designed for household use, providing air circulation in rooms. It features adjustable height, tilt angle, and oscillation for customized comfort.

Parts List

The fan is supplied unassembled. Please identify all parts before assembly:

• 1. Front safety grid
• 2. Fan blades
• 3. Round metal frame
• 4. Rear safety grid
• 5. Oscillating button
• 6. Motor unit
• 7. Pivot knob and tilt angle adjuster
• 8. Retaining screw
• 9. Small pivot knob and tilt angle adjuster
• 10. Motor unit fastening screw
• 11. Speed switch
• 12. Motor axis
• 13. Power cord
• 14. Internal telescopic tube
• 15. Fan height adjustment
• 16. Stand
• 17. Base
• 18. Base weighter
• 19. Washer
• 20. Base screw

Safety Measures

Please read the following safety instructions carefully before operating the appliance:

• Ensure the appliance is connected to a power supply matching your local network specifications.
• This appliance is intended for indoor, domestic use only. Do not use it for industrial purposes.
• Do not operate the fan with a damaged cord, plug, or if the appliance itself is damaged.
• Keep the power cord away from sharp edges and hot surfaces. Do not pull the cord to disconnect; always grasp the plug.
• Do not reel the cord around the device housing.
• Never attempt to repair the appliance yourself. If issues arise, contact the nearest service center.
• Using non-recommended accessories or replacement parts may cause damage.
• Always unplug the appliance and allow it to cool before cleaning or maintenance. Keep unplugged when not in use.
• To avoid electric shock or fire, do not immerse the appliance in water or other liquids. If this occurs, immediately unplug and contact a service center.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a responsible person.
• Keep children supervised to prevent them from playing with the appliance.
• Do not touch moving parts of the fan.
• Keep foreign objects away from moving parts and grilles.
• Do not block air inlets on the motor block.
• Never operate the fan without protective grilles in place.

Assembly

The fan is delivered unassembled. Follow these steps for proper assembly:

1. Attach the stand (16) to the base (17), securing it with the base weighter (18), washer (19), and base screw (20).
2. Unscrew the fan height adjustment screw (15). Place the internal telescopic tube (14) at the desired height and secure it with the screw (15). Ensure the tube is secured before attaching the motor section.
3. Place the motor unit (6) onto the telescopic tube (14) and secure it using the fastening screws (8 and 10). Attach the pivot knob and tilt angle adjusters (7 and 9).
4. Attach the rear safety grid (4) to the motor unit (6) using the provided screws.
5. Mount the fan blades (2) onto the motor axis (12) and fasten securely with the blades binding screw (turn counter-clockwise).
6. Attach the round metal frame (3) to the rear safety grid (4) using screws.
7. Place the front safety grid (1) onto the round frame (3) and fasten it with screws.

Using the Device

Follow these instructions for operating the fan:

• Oscillation: To make the fan oscillate, push the oscillation button (5) down. To stop oscillation, pull the button up.
• Tilt Adjustment: Use the pivot knob (7) to adjust the desired airflow angle.
• Height Adjustment: Loosen the height adjustment screw (15), set the fan to the desired height, and then tighten the screw.
• Speed Control: To turn on the fan, press one of the speed control buttons:
  • 0 – Off
  • I – Low airflow speed
  • II – Medium airflow speed
  • III – High airflow speed

Cleaning and Maintenance

Proper care ensures longevity and safe operation:

• Always unplug the appliance and allow it to cool before cleaning.
• Clean the exterior surfaces and base with a soft, slightly damp cloth, then dry with a clean cloth.
• For seasonal storage, it is recommended to cover the fan with its original carton.
• To clean the fan blades and grilles, use a cloth dampened with soapy water.
• Never immerse the appliance or its motor housing in water.
• Do not use chemical or abrasive cleaners.

Specifications

Warranty Information

The warranty does not cover consumable parts such as filters, ceramic and non-stick coatings, rubber seals, etc.

The production date can be found on the serial number sticker on the product packaging or the device itself. The serial number consists of 13 characters, where the 4th and 5th characters indicate the month, and the 6th and 7th characters indicate the year of production.

The producer reserves the right to change the product's specifications, appearance, and country of manufacture without prior notice. Please verify upon purchase.

For current information about service centers, please visit: http://multimarta.com

Manufacturer and Importer Information

Manufacturer: Cosmos Far View International Limited, Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China.

Supplier/Distributor (Russia): OOO «Valeriya», Russia, Leningradskaya Oblast, Vsevolozhsky District, territory PR Sputnik, Tsentralnaya Street, building 58A, premise 419A, Tel/Fax: 8(812) 325-23-34.

Importer (Russian Federation): OOO "Briz", Russia, 194156, St. Petersburg, Bolshoy Sampsonievsky Ave., building 93, letter A, premise 7-N, office 5, Tel/Fax: 8(812) 325-23-48.