Marta MT-FN2542 Stand Fan User Manual

Parts List

Safety Precautions

Please read this manual carefully before operating the appliance and keep it for future reference.

• Before initial use, check that the technical specifications of the appliance indicated on the marking correspond to the power supply in your local network.
• Purpose: The appliance is intended for household use according to this user manual. The appliance is not intended for industrial use.
• The appliance is used for additional air circulation in the room. Use outside the premises, near flammable objects and substances is prohibited.
• Ensure that the power cord does not touch sharp edges and hot surfaces. Do not pull, twist, or wrap the power cord around the appliance housing. When unplugging the appliance from the power outlet, do not pull the power cord, only hold the plug.
• Use the appliance only when fully assembled on its intended base. Always place the appliance on a flat, stable surface. • Do not attempt to repair the appliance yourself. Do not disassemble the appliance yourself; in case of any malfunctions, as well as after dropping the device, unplug the appliance from the electrical outlet and contact the nearest service center.
• Do not use the appliance with a damaged power cord or other damage.
• If the power cord is damaged, its replacement, to avoid danger, can only be carried out by qualified specialists – service center employees. Unqualified repair poses a direct danger to the user.
• The use of not recommended additional accessories may be dangerous or lead to damage to the appliance.
• Always unplug the appliance from the power outlet before cleaning, or if you are not using it.
• Do not immerse the appliance in water or other liquids to avoid electric shock and fire. If this happens, immediately unplug it from the power outlet and contact a service center for inspection.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed on the use of the appliance by a person responsible for their safety. Children should be supervised to prevent them from playing with the appliance.
• Do not touch the rotating parts while the fan is running. Ensure that foreign objects do not enter the appliance openings or its grilles. Do not block the ventilation openings on the motor housing. Do not allow hair to get caught. Do not use the fan without grilles.

Assembly of the Fan

The appliance is supplied disassembled. Before assembly, ensure that the delivery set is complete and the appliance has not been damaged during transportation.

Do not connect the appliance to the mains before you have completely assembled it. You need to perform the following operations:

1. Attach the stand (10) to the base (11), securing them with the "L"-shaped fixing screw (12).
2. Install the stand with the control panel and secure it with the screw fastener.
3. Unscrew the rear grille locking nut (6) and remove the blades from the motor.
4. Install the motor onto the stand and secure it with the screw fastener.
5. Install the rear grille (7) onto the front motor panel and tighten the locking nut (6).
6. Install the fan blades (5) onto the motor shaft and securely fasten them with the fixing screw (4).
7. Attach the front protective grille (2) to the rear grille and secure it with the grille locking ring.

Using the Device

Control Panel Buttons

• On/Speed: Button to turn on the fan and switch between blade rotation speeds; Off: Button to turn off the fan.
• Timer: Used to program the fan shut-off time up to 7.5 hours; OSC (oscillation): Button to turn the oscillation function on and off.

Indicator Lights

• Natural: "Natural" mode (simulates natural wind: airflow speed varies inconsistently from low to high);
• Sleep: "Night" mode (airflow speed changes sequentially, increasing and decreasing);
• 4 H, 2 H, 1 H, 0.5 H: Set fan shut-off time (up to 7.5 hours in total);
• H (high/high): Maximum rotation speed; M (medium/medium): Medium rotation speed; L (low/low): Minimum rotation speed.

Remote Control

• OFF (OFF): Fan off button; ON/SPEED (ON/SPEED): Fan on and airflow speed selection button;
• OSC (oscillation): Oscillation function on/off button. Timer (TIMER): Button to program fan shut-off time up to 7.5 hours; Mode (MODE): Airflow mode selection: comfortable (constant airflow), natural, night.

Note: To operate the remote control, insert a CR2025 battery. Check for an insulating film in the battery compartment; if present, remove it. If the remote control is not used for a long time, remove the battery from the compartment.

Cleaning and Care

Always unplug the appliance from the power outlet before cleaning. Release the connecting latches and remove the front grille. Use a cloth soaked in soapy water to clean the fan blades. Do not use abrasive cleaners for cleaning. Never immerse the appliance housing in water and do not allow water to enter the motor housing.

Storage and Transportation

Ensure that the appliance is unplugged and completely cooled down. Before storing the appliance, follow all the requirements of the CLEANING AND CARE section. Storage conditions: store at a positive temperature and air humidity not exceeding 80%. Storage period is not limited. Ensure the integrity of the packaging during transportation.

Implementation

Carried out in accordance with the general rules for the sale of goods and services and the Law "On Consumer Rights Protection".

Disposal Rules and Conditions

Packaging, user manual, and the appliance itself must be disposed of in accordance with the local waste recycling program. Do not dispose of such items with regular household waste.

Technical Specifications

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)

Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device. Current information about service centers is available on the website http://multimarta.com/