JA-110P PET - PIR Motion Detector for Buses with Basic Animal Immunity

Introduction

This document provides technical specifications and installation guidance for the JABLOTRON JA-110P PET, a PIR motion detector designed for bus applications. It offers basic immunity to small animals, helping to reduce false alarms. Installation should be performed by a qualified technician.

Note: This text is machine-translated from English. For any ambiguities, please refer to the original document. Contact technical support for any errors or further questions.

Installation

⚠️ When connecting the detector to the bus, always switch off the system power.

Installation Steps

1. Open the detector cover by pressing the tab (5). Avoid touching the internal PIR sensor (11) as it may be damaged.
2. Remove the PCB by releasing the latch (3).
3. Punch out holes for screws and the cable in the plastic base. The recommended mounting height is 2 meters above the floor.
4. Insert the bus cable and attach the plastic base to the wall using screws (vertically, with the cover flap facing downwards).
5. Reinsert the PCB and connect the cables to the terminals (8).
6. Follow the control panel installation instructions.

Figure 1: Detector Opening and Component Description

The diagram illustrates the detector's exterior and interior. Key components are:

• 1 – Mounting holes for flat walls
• 2 – Angled mounting holes (for corners)
• 3 – PCB latch
• 4 – Angled mounting holes (for corners)
• 5 – Cover tab
• 6 – Red LED (activation)
• 7 – Yellow LED (fault)
• 8 – Bus terminals
• 9 – Production code
• 10 – Cover tamper sensor
• 11 – PIR sensor

Back Panel Connections

The back panel features connection terminals for the bus system and status indicators. These include:

• Bus terminals (8) for connecting to the JABLOTRON bus.
• Red LED (6) indicating activation.
• Yellow LED (7) indicating a fault condition.
• Cover tamper sensor (10) to detect unauthorized opening.
• PIR sensor (11) for motion detection.
• Production code (9).

System Assignment and Settings

Configuration depends on the control panel type. Refer to the control panel's instruction manual for recommended software or application settings.

Technical Data

Compliance and Declaration

JABLOTRON a.s. hereby declares that the JA-110P PET device is in compliance with the relevant EU harmonisation legislation: Directives No. 2014/30/EU, 2011/65/EU, provided it is used as intended. The original Declaration of Conformity can be found on the website www.jablotron.com in the "Downloads" section.

The device bears CE and UKCA markings.

Product Disposal

Proper disposal of this product helps conserve valuable resources and prevent potential negative impacts on human health and the environment that could result from improper waste handling. Please return the product to the seller or contact local authorities for detailed information on the nearest designated collection point. ♻️