GIRA
Information Module (5560 9xx) / Blind Module (5568 9xx)
Gira Giersiepen GmbH & Co. KG
Elektro-Installations-Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 1220
42461 Radevormwald
Tel. +49 (0) 21 95 - 602 - 0
Fax +49 (0) 21 95 - 602 - 191
Product Overview
The Information Module enables the display of information (e.g., house numbers) and can be visually personalized using the Gira labeling service available at www.beschriftung.gira.de.
The purpose of the Blind Module is to reserve space for future use, such as additional equipment with a camera module. Furthermore, it serves as a design element in the implementation of large-scale entrance stations within the system design.
[i] Module Installation
The following work steps can be found in the installation manual for the 1- to 5-part flush-mounted housing for System 106, or the 1- to 5-part cover, as follows:
- Secure the module to the functional bracket.
- Connect the connection cable.
- Attach the terminating resistors.
Terminating Resistor
Two terminating resistors are always included with the 2-part flush-mounted housing.
The terminating resistors are always connected to the first and last module on the system cable.
Module Replacement
Step 1: Detachment
Illustration shows a module with its connection cable. A screwdriver is depicted engaging a locking mechanism, with a curved arrow indicating rotation for release.
Step 2: Removal from Housing
Depicts the module being detached from the flush-mounted housing. A leftward arrow indicates the direction of removal. An inset view shows the rear of the module and the housing's internal connections.
Step 3: Mounting the Housing
Shows the housing being mounted to the wall. Four screws (4x) are used for attachment. A magnified view details the screw insertion and tightening mechanism.
Installation in reverse order.
