Step 1: Install Inner Backplate
Mount the Inner Backplate (AA) to the electrical box using two Outlet Box Screws (DD).
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box. ⚡
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician. ?
TOOLS REQUIRED
- Pliers ?
- Screwdriver ?
- Wire Strippers ✂️
- Electrical Tape ?
Ratings
| Model No. | Wattage |
|---|---|
| PNT8306MBK | 12W |
| PNT8406MBK | 12W |
Voltage: 120Vac, 60Hz
CARE AND MAINTENANCE
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS
- A Fixture Body x 1
MOUNTING HARDWARE
- AA Inner Backplate x 1
- BB Mounting Screw x 2
- CC Wire Connector x 3
- DD Outlet Box Screw x 2
INSTALLATION
Step 2: Wiring
Connect the wires using Wire Connectors (CC):
- Supply White wire to Fixture White wire.
- Supply Black (or red) wire to Fixture Black wire.
- Supply Ground wire to Fixture Ground wire and to the Green ground screw on the backplate.
Step 3: Install Fixture Body
Attach the Fixture Body (A) to the Inner Backplate.
Step 4: Apply Caulking
Apply exterior caulk around the bottom edge of the backplate to prevent moisture from escaping. Note: Do NOT caulk the bottom of the backplate to allow moisture to escape.
Your installation is now complete! Restore electricity and save this sheet for future reference. ✅
Quoizel | Artisans In Lighting
