Hulala Home - CHDT0511 Chair
Thank you for choosing Hulala Home furniture. Please read this guide carefully for assembly and maintenance.
Warranty
Hulala Home offers a 30-day warranty starting from the date of item receipt. To process a warranty claim, please provide your order number or item receipt. Replacement parts may be available for purchase after the warranty period.
Assembly Assistance: If you encounter difficulties with assembly or are missing parts, please email AMZCustomerservice@hulalahome.com with your order number. For returns, please consult the return policy of the retailer or marketplace where the item was purchased.
We appreciate your purchase and hope you enjoy your new furniture!
Product Details
Item Number: CHDT0511
Weight Limitation: 250 LBS
NOTE: This brochure contains IMPORTANT safety information. Please read and keep it for future reference.
Maintenance and Warnings
- Keep furniture away from heat sources.
- Clean furniture using a non-color mild soap with warm water (1:10 soap to water ratio). Avoid harsh cleansers, polishes, detergents, solvents, abrasives, spray packs, or leather cleaners.
- Do not place furniture under direct sunlight, as material may fade over time.
- Do not use on-site dry cleaning machines.
- Children should not climb or jump on the furniture.
- Use a padded barrier to protect the furniture surface when writing on it.
- This product is intended for residential use only, not for commercial use.
Weight Limitation: 250 LBS
Parts List
- A*1 - Seat
- B*1 - Back
- C*1 - Seat Cushion
- D*4 - Legs
Persons Required For Assembly: 1
Hardware List
Included Hardware:
- ①*12 - Bolt (M6*20mm)
- ②*1 - Allen Key (M5)
- ③*1 - Flat washer (M8*22)
- ④*1 - Bolt (M8*60)
- ⑤*1 - Nut
Spare Parts:
- ①*1 - Bolt (M6*20mm)
- ③*1 - Flat washer (M8*22)
Please check all packing material carefully for small parts that may have come loose during shipment.
Assembly Instructions
Step 1
Attach the legs (D) to the seat (A) using the provided bolts and washers. Ensure all connections are secure.
Step 2
Align the backrest (B) with the seat (A). Secure it using the provided hardware.
Step 3
Important: Have an adult partner assist in holding the armrests while aligning the metal brackets on the backrest/armrests.
Step 4
Continue securing the backrest (B) to the seat (A) using the remaining hardware, including bolts, washers, and nuts.
Step 5
Ensure all parts are firmly attached and the chair structure is stable.
Step 6
Place the seat cushion (C) onto the seat (A).
Step 7
Attention: After installation, adjust the adjustable levelers on the legs to ensure the chair is balanced. Double-check all packing materials for any loose small parts.
