HOMCOM 837-079 Bench: Assembly, Usage, and Care Instructions
This document provides instructions for the assembly, use, maintenance, and storage of the HOMCOM 837-079 bench.
Important Information
Please read this manual carefully and retain it for future reference.
For Domestic Use Only
This product is intended for domestic use only.
Instructions for Use
- Place the bench stably on a flat floor.
- Keep away from open flames or heat sources.
- Avoid overloading the bench.
Precautions Before Assembly
- Prepare a clean and dry assembly area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean the bench with a soft fabric.
- Regularly check the seating and structure.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risk of mold.
Assembly Instructions
Parts List:
- Part A: Bench seat/top (1x)
- Part B: Legs (4x)
- Part C: Screws M6*20 (12x, 1 spare)
- Part D: Brackets (4x)
Assembly Steps:
A visual representation of the HOMCOM bench, showing its upholstered seat and four angled legs, is provided.
Step 01: Diagram showing the underside of the bench seat (Part A) with legs (Part B) being attached using screws (Part C) and brackets (Part D).
Step 02: Illustration of the fully assembled HOMCOM bench.
Product with Electrical Parts
If the product has electrical parts (e.g., heated surface or power supply unit):
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is only to be used with the power supply unit provided with the appliance.
- The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped.
- If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance.
- The power supply unit shall not be used if the pins of the plug part are damaged.
General Safety Warning: Be aware of pinching or cutting hazards during assembly. The manufacturer is not responsible for damages caused by incorrect installation or environmental factors.