HOMCOM Storage Bench Assembly and Care Guide
Model: 838-271V00 | Document ID: IN230800123V02_GL
Important Information
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
This document contains essential information for the safe and proper use, assembly, and maintenance of your HOMCOM storage bench. Please read all instructions thoroughly before proceeding.
Product Usage and Care
For Domestic Use Only
This product is designed exclusively for domestic use.
Instructions for Use:
- Place the bench stably on a flat floor.
- Keep away from open flames and heat sources.
- Avoid overloading the bench.
Precautions Before Assembly:
- Prepare a clean and dry assembly area.
- Verify that the product is not damaged.
- Check that all parts are present and accounted for.
Maintenance:
- Clean the bench with a soft fabric.
- Regularly check the structure of the bench.
Storage Conditions:
To prevent mold, store the fabric components completely dry in a clean and dry place.
Safety Warnings:
Attention: Be aware of crushing and cutting hazards during assembly.
The manufacturer disclaims all responsibility for damages resulting from improper installation or environmental factors.
If the bench is equipped with powered seat height adjustments (not applicable to this model based on diagrams, but included as per source text), only qualified personnel may replace or repair those components.
Assembly Instructions
Parts List
| Identifier | Description | Quantity |
|---|---|---|
| A | Storage Bench Unit | 1 |
| B | Legs | 4 |
| C | Screws (M6x15mm) | 16 |
| D | Allen Key | 1 |
Assembly Steps
Step 1: Unpack and Identify Parts
Diagram shows the main bench unit (A), four legs (B), sixteen screws (C), and one Allen key (D) laid out. The legs (B) are depicted being removed from packaging.
Step 2: Attach Legs
Diagram shows the bench unit (A) positioned upside down. The four legs (B) are being screwed into the designated attachment points on the underside of the bench using the screws (C) and the Allen key (D).
Step 3: Final Check
Diagram shows the bench lid being opened and then closed. The word "Done" indicates that the assembly is complete.
Contact and Support
If you have any questions, please contact our customer care center. Our contact details are below:
- USA: 001-877-644-9366, customerservice@aosom.com (Imported by Aosom LLC)
- Canada: 416-792-6088, customerservice@aosom.ca (Imported by Aosom Canada Inc.)
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk (IMPORTER ADDRESS: MH STAR UK LTD)
- France: 0033-1-84166106, aosom@mhfrance.fr (Importé par/Fabricant/REP: MH FRANCE)
- Germany: service@aosom.de (Hersteller/REP: MH Handel GmbH)
- Italy: 0039-0249471447, clienti@aosom.it (IMPORTATO DA/Produttore/REP: AOSOM Italy srl)
- Spain/Portugal: 0034-931294512, atencioncliente@aosom.es / info@aosom.pt (IMPORTADOR/Fabricante/REP: SPANISH AOSOM, S.L.)
Information regarding recycling is available at quefairedemesdechets.fr.
