HOMCOM Ottoman with Storage
Model Numbers: 838-527V00, 838-527V70, 838-531V00
Product Code: IN241100549V01_GL
Important Information
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
This product is intended for domestic use only.
Assembly requires approximately 0.5 hours and involves 7 steps.
Diagram Description: A line drawing of an ottoman with storage, featuring a lid and four legs. The diagram indicates assembly will take 7 steps and approximately 0.5 hours.
Instructions for Use
- Place the ottoman stably on a flat floor.
- Keep away from open flames and heat sources.
- Avoid overloading the ottoman.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the parts are missing.
Maintenance
- Clean with a soft fabric.
- Check the seating regularly.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Safety Warnings
Assembly Hazards
Beware of crushing and cutting hazards during assembly. The manufacturer declines all responsibility in case of damages due to a bad installation.
Electrical Parts Warning
Parts List
| Identifier | Description | Quantity |
|---|---|---|
| A | Frame | x1 |
| B | Side Panels | x1 |
| C | Main Body | x1 |
| D | Lid | x1 |
| E | Lid Support | x1 |
| F | Legs | x4 |
| G | Lid Base | x1 |
Hardware List
| Identifier | Description | Quantity |
|---|---|---|
| H | Allen Key | x1 |
| J | M6*40 Screw | x8 |
| K | M6*25 Screw | x4 |
| L | Washer | x4 |
Assembly Steps
- Step 01: Attach frame (A) to side panels (B) using four M6*25 screws (K) and four washers (L). Then, attach frame (A) to the main body (C) using four M6*40 screws (J) and four washers (L).
- Step 02: Secure the frame (A) to the side panels (B) using four M6*40 screws (J) and the Allen key (H).
- Step 03: Secure the frame (A) to the main body (C) using four M6*40 screws (J) and the Allen key (H).
- Step 04: Insert the main body (C) into the assembled frame structure.
- Step 05: Screw the four legs (F) into the designated points on the bottom of the main body.
- Step 06: Place the lid base (G) onto the top of the assembled unit, followed by the lid (D). The assembly is now complete.
Contact Information
For any questions or assistance, please contact the customer care center:
- US: 001-877-644-9366, customerservice@aosom.com (Imported by Aosom LLC, USA)
- CA: 416-792-6088, customerservice@aosom.ca (Imported by Aosom Canada Inc., Canada)
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk (IMPORTER: MH STAR UK LTD, UK)
- FR: 0033-1-84166106, aosom@mhfrance.fr (Importé par/Fabricant/REP: MH FRANCE, France)
- DE: +49 4087408465, service@aosom.de (Hersteller/REP: MH Handel GmbH, Germany)
- IT: 0039-0249471447, clienti@aosom.it (IMPORTATO DA/Produttore/REP: AOSOM Italy srl, Italy)
- ES: 0034-931294512, atencioncliente@aosom.es (IMPORTADOR/Fabricante/REP: SPANISH AOSOM, S.L., Spain)
- PT: 0034-931294512, info@aosom.pt (IMPORTADOR/Fabricante/REP: SPANISH AOSOM, S.L, Portugal)
Please consider recycling or proper disposal of packaging materials.
Recycle: ♻️
For disposal information, visit quefairedemesdechets.fr.
