Aldes ISONE 1500 Fire Damper and Cartridges
Model: ISONE 1500 Ø 450 mm (Part Number: 11043068)
Product Overview
The ISONE 1500 with ring is part of a range of flush-mounted fire dampers, certified up to 1500 Pa and optimized for high buildings. It is designed for the compartmentation of commercial buildings, including public-access buildings and high-rise structures.
Product Benefits:
- Traditional mortar seal, no attachment accessories required.
- Scalable mechanism allowing for easy insertion of all equipment by hand.
- Dual-voltage (24/48V) trip device, preventing control errors.
Regulations and Compliances:
- PV CE Number: 1812-CPR-1016
Principles of Operation
The damper remains open in its normal position. In the event of a fire, it closes to prevent the propagation of fire and smoke between compartments. Closure can be initiated either thermally or centrally via the scalable mechanism.
Product Description
The ISONE 1500 with ring is a flush-mounted fire damper suitable for ventilation systems operating at pressures between 500 Pa and 1500 Pa. It features a scalable mechanism, easy wiring through a removable terminal block, and offers multiple installation possibilities.
Installation
- Flush-mounted in a 110 mm concrete wall.
- Flush-mounted in a 150 mm concrete slab (maximum opening size of 600 x 600 mm at 1500 Pa).
- Utilizes a traditional mortar seal.
- Opening dimensions: (X+50) mm x (Y+50) mm.
- Flap shaft orientation can be vertical or horizontal.
- Installation must adhere to fire resistance classification reports.
Diagrams:
- Mise en oeuvre mur béton: Illustrates installation within a concrete wall.
- Mise en oeuvre dalle béton: Shows installation within a concrete slab (two views provided, one with duct connection).
Main Characteristics
- Certified and compliant with NF-S-61937-5.
- CE marked as per EN 15650, certificate number 1812-CPD-1016.
- Approved installation without requiring attachment accessories.
- Performance ratings:
- El 120 S - 1500 Pa in a 110 mm concrete wall.
- El 120 S - 1500 Pa in a 150 mm concrete slab (up to 600 x 600 mm).
- Includes a 70°C fusible link.
- Rectangular duct components are made of refractory material.
- Shells are fixed to the ends for connection to circular ducting.
- Features a mobile flap made of refractory material that closes on stops.
- Incorporates the ISONE type upgradable mechanism.
- Facilitates easy cabling using the removable terminal block.
Supplementary Characteristics
- To achieve a 125 mm diameter damper, order two RCC reducers (part number 11143575) in addition to the 160 mm damper.
- To achieve a 100 mm diameter damper, order two RCC reducers (part number 11143574) in addition to the 160 mm damper.
Dimensional Data
| Variant | A (mm) | L (mm) | Ø (mm) | Ø Opening (mm) |
|---|---|---|---|---|
| 11043068 | 515 | 580 | 450 | 565 x 565 |
Diagram Dimensions:
- A: 515 mm
- L: 580 mm
- Damper Diameter (Ø): 450 mm
- Opening Diameter (Ø): 565 x 565 mm
- Additional dimensions indicated in diagrams: 108 mm, 50 mm.
