Aldes ISONE 1500 Ø 710 mm Fire Damper
Model Number: 11043072
Product Overview
The ISONE 1500 with ring is part of a range of flush-mounted fire dampers, certified up to 1500 Pa and optimized for high buildings. It is designed for the compartmentation of commercial buildings, including public-access buildings and high-rise structures.
Product Benefits
- Traditional mortar seal, no attachment accessories required.
- Scalable mechanism allowing for easy installation and maintenance, with all equipment insertable by hand.
- Dual-voltage (24/48V) trip device to prevent control errors.
Principles of Operation
The damper remains open in its normal position. In the event of a fire, it closes to prevent the spread of fire and smoke between compartments. Closure can be initiated thermally or centrally via the scalable mechanism.
Product Description
The ISONE 1500 with ring is a flush-mounted fire damper suitable for ventilation systems operating at pressures between 500 Pa and 1500 Pa. It features a scalable mechanism, easy wiring through a removable terminal block, and offers multiple installation possibilities.
Installation
- Suitable for flush-mounting in a 110 mm concrete wall.
- Suitable for flush-mounting in a 150 mm concrete slab (maximum dimensions 600 x 600 mm at 1500 Pa).
- Utilizes a traditional mortar seal.
- Opening dimensions required are (X+50) mm x (Y+50) mm, where X and Y are the damper dimensions.
- The flap shaft must be oriented vertically or horizontally.
- Installation must adhere to fire resistance classification reports.
Main Characteristics
- Certified and compliant with NF-S-61937-5.
- CE marked according to EN 15650, with PV CE number 1812-CPD-1016.
- Approved for installation without attachment accessories:
- El 120 S - 1500 Pa in a 110 mm concrete wall.
- El 120 S - 1500 Pa in a 150 mm concrete slab (up to 600 x 600 mm).
- Includes a 70°C fusible link.
- Rectangular duct components are made of refractory material.
- Shells are fixed to the ends for connection to circular ducting.
- The mobile flap is made of refractory material and closes on stops.
- Features an upgradable ISONE type mechanism.
- Facilitates easy cabling using the removable terminal block.
Dimensional Data
| Variant | A (mm) | L (mm) | Ø (mm) | Ø opening (mm) |
|---|---|---|---|---|
| 11043072 | 765 | 680 | 710 | 815 x 815 |
Diagram showing dimensions:
A: 765 mm, L: 680 mm, Ø: 710 mm. Additional dimensions shown: 108 mm, 50 mm.
Supplementary Characteristics
- To achieve a 125 mm diameter damper, order two RCC reducers (part number 11143575) in addition to the 160 mm damper.
- To achieve a 100 mm diameter damper, order two RCC reducers (part number 11143574) in addition to the 160 mm damper.
Regulations and Compliances
PV CE Number: 1812-CPR-1016
