MINIS FORUM Mini PC User Manual

Air Vents

The air vents allow your Mini PC chassis to expel hot air out. For optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions (such as Paper, books, clothes, transmission lines).

Getting Started With Your Mini PC

Step 1: Connect Display

Connect the display to the Mini PC's HDMI™ port or USB-C Port.

Step 2: Connect Keyboard and Mouse

Connect the keyboard and mouse.

Step 3: Connect Power Adapter

Connect the provided power adapter to your Mini PC.

Step 4: Turn On and Start

Turn on the power and start the Mini PC.

Operation

Turning Off Your Mini PC

If the Mini PC is frozen or slow to respond, press and hold the power button for at least 10 seconds to force shutdown.

Putting Your Mini PC To Sleep

To put your Mini PC on Sleep mode, press the Power button once.

Installation

Opening the Chassis

Remove the foot mats, use a tool to unscrew the bottom shell screws, and then use a tool to open the bottom shell from the “FRONT” side.

DIY DDR/SSD Installation

Install Memory (DDR4)

Install the Memory into the SODIMM Slot by inserting it slantwise into the buckles on both sides and fix it.

Install SSD

Install the SSD into its slot by inserting it slantwise and fix it with screws.

DIY HDD Installation

Put the HDD on the bottom cover and fix it with included screws, then connect the SATA cable.

Close the bottom cover and tighten the screws, then reattach the foot pads.

VESA Mount Installation

Mount Your Mini PC to a VESA Compatible Device.

Follow these steps:

• Install the VESA Mount on the back of the device with the included screws. (A)
• Place Mini PC upside down on a flat and stable surface and install the included screws to the screw holes of the bottom of the Mini PC. Warning: Do not over-tighten the screws as it may damage your Mini PC.
• Fix the Mini PC to the VESA Mount of the monitor. (B)

Safety Information

Read and follow all instructions in the documentation before operating your system to ensure your safety.

General Precautions

• Dust, moisture, and drastic temperature changes will affect the product life; avoid placing the product in such environments.
• The suitable temperature for the Notebook PC and accessories is 0°C ~ 35°C.
• Ensure enough space around the system for ventilation. Do not block or cover openings. Never insert objects of any kind into ventilation openings.
• Install and operate this equipment with a minimum distance of 20cm between the radiator and your body.
• When using power extension cords, ensure the total current of all connected products is within the rated current of the cables for stable operation.
• Do not step on the power cord or place anything on your Mini PC.
• Do not spill water or any other liquid on this product.
• Even when the system is off, a small current may still pass through. To avoid severe damage from electric shock, unplug all power cables from sockets temporarily before cleaning or moving the product.

Technical Issues

If you encounter technical problems, unplug the power cord and contact a qualified service technician or your retailer.

Maintenance Guideline

• Do not step on the power cord or put anything on your Mini PC.
• Do not spill water or any other liquid over this product.
• There's still some current passing through even when the system is off. To avoid severe damage caused by possible electric shock, unplug all power cables from sockets temporarily before cleaning or moving this product.
• If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer.

Frequently Asked Questions (FAQ)

Slow Startup

The start-up speed may be slow in situations like: unexpected restart, BIOS reset, memory bank replacement, or SSD replacement. Generally, the start-up speed will return to normal after one successful power-on and power-off process.

GPU Memory Usage

The core graphics card will occupy a part of the memory as GPU-specific memory.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

Contact Information

Manufacturer Information

Manufacturer: Micro Computer (HK) Tech Limited

Website: https://www.miniscloud.com

Address: FLAT/RM 18, 28/F, Shui On Centre, 6-8 Harbour Road, Waterfront Wan Chai, Hong Kong

Technical Support

TEL: 852-23860910

Online Technical Support

Website: https://www.minisforum.com/new/support

Email: support@minisforum.com

Product Number: PN:M09.04.AHBTB007