MINIS FORUM MINI PC S100-WLP
Package Contents
The package includes:
- Cable / Cable HDMI
- USB Type-C Power Delivery Adapter*
- User Manual
Getting To Know Your Mini PC
The Mini PC features the following ports and components:
- 01 Power Button: Used to turn the Mini PC on/off, put it into sleep mode, or force shutdown (hold for 10 seconds).
- 02 Reset Hole: Press and hold for ten seconds (with power removed) to restore BIOS to factory defaults.
- 03 USB-C Port: Provides a transmission rate of up to 10.0 Gbps, supports 4K@60 Hz display output, PD fast charging, 5V1.5A peripheral charging, DP, and data I/O.
- 04 RJ-45 LAN Port: Supports standard Ethernet cables for connection to a local area network (2.5Gbps) and PoE (IEEE 802.3at).
- 05 USB3.2 Gen2 Port: Offers a transfer rate of up to 10 Gbit/s and can connect to keyboards, pointing devices, cameras, hard disks, printers, and scanners.
- 06 Air Vent: Allows hot air to expel from the chassis. Ensure these are not obstructed for optimal heat dissipation.
- 07 HDMI Port: An uncompressed, fully digital audio/video interface for connecting external display devices and televisions.
Using Your Mini PC
- Connect Display: Connect your display to the Mini PC's HDMI port or USB-C Port.
- Connect Peripherals: Connect the keyboard and mouse.
- Connect Power: Connect the provided power adapter to your Mini PC.
- Power On: Turn on the power and start the Mini PC.
Turn Off Your Mini PC
If the Mini PC is frozen or slow to respond, press and hold the power button for at least 10 seconds to force shutdown.
Putting Your Mini PC To Sleep
To put your Mini PC into Sleep mode, press the Power button once.
Safety Information
Read and follow all instructions in the documentation before operating the system to ensure safety.
- Avoid placing the product in dusty, humid, or extreme temperature environments.
- Operate the product within a temperature range of 0°C to 35°C.
- Ensure sufficient space around the system for ventilation and do not block air vents. Never insert objects into the vents.
- Install and operate the equipment with a minimum distance of 20 cm between the product and your body.
- When using extension cords, ensure the total current of connected products does not exceed the cable's rated current.
Maintenance Guideline
- Do not step on the power cord or place objects on the Mini PC.
- Do not spill water or any other liquid on the product.
- Unplug all power cables before cleaning or moving the product, as a small current may still pass through when the system is off.
- For technical issues, unplug the power cord and contact a qualified service technician or retailer.
FAQ
- It is recommended to install or upgrade memory modules, wireless cards, and SSDs under professional supervision.
- Slow startup may occur due to unexpected restarts, BIOS resets, memory, or SSD replacements. Startup speed typically returns to normal after a successful power cycle.
- The integrated graphics card uses a portion of the system memory as dedicated GPU memory.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for Compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Radiation Exposure Statement: Antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
