Minis Forum Mini PC User Manual

Product Overview

This document provides essential information for the Minis Forum Mini PC, including installation instructions, safety guidelines, maintenance procedures, frequently asked questions, and regulatory compliance details.

VESA Mount Installation

The following steps guide you through mounting your Mini PC to a VESA compatible device.

Step 1: Bottom Cover Assembly

The image shows the underside of a Mini PC. It depicts the process of closing the bottom cover, tightening screws, and reattaching the foot pads.

Step 2: VESA Mount Installation

Diagram A shows the VESA mount being attached to the back of the Mini PC using screws. Diagram B illustrates the Mini PC, now with the VESA mount attached, being connected to a monitor's VESA mounting bracket.

Install the VESA mount on the back of the device with the included screws (A).
Remove the foot mats.
Place the Mini PC upside down on a flat, stable surface. Install the included screws into the screw holes on the bottom of the Mini PC. Warning! Do not over-tighten screws as it may damage the Mini PC.
Fix the Mini PC to the VESA mount of the monitor (B).

Safety Information

Read and follow all instructions in the documentation before operating your system to ensure your safety.

Safety Precautions

Dust, moisture, and drastic temperature changes affect product life; avoid placing the product in such environments.
Use the product in environments with temperatures between 0°C and 35°C.
Ensure sufficient space around the system for ventilation. Do not block or cover ventilation openings. Never insert objects into ventilation openings. Keep small objects like paper fragments, screws, and wires away from the adapter, slots, and openings to prevent short circuits or poor contact.
Install and operate the equipment with a minimum distance of 20cm between the product and your body.
When using power extension cords, ensure the total current of all connected products does not exceed the cable's rated current for stable operation.

Maintenance Guidelines

Do not step on the power cord or place anything on the Mini PC.
Do not spill water or other liquids on the product.
Even when the system is off, a small amount of current may still flow. To avoid potential electric shock, unplug all power cables from sockets before cleaning or moving the product.
If technical problems occur, unplug the power cord and contact the service technician or authorized retailer.

Frequently Asked Questions (FAQ)

Q: Why might the start-up speed be slow?
A: Slow start-up speed may occur due to unexpected restarts, BIOS resets, memory bank replacement, or SSD replacement. Typically, start-up speed returns to normal after one successful power-on/power-off cycle.
Q: What is the core graphics card's memory usage?
A: The core graphics card occupies a portion of the system memory as GPU-specific memory.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

Operations in the 5.15-5.35GHz band are restricted to indoor usage only.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Contact Information

Manufacturer: Micro Computer (HK) Tech Limited

Website: https://www.miniscloud.com

Address: FLAT/RM 18, 28/F, Shui On Centre, 6-8 Harbour Road, Waterfront Wan Chai, Hong Kong

TEL: 852-23860910

Online Technical Support

Website: https://www.minisforum.com/new/support

Email: support@minisforum.com

	MINIS FORUM Mini PC Installation Guide and FCC Statement This document provides installation and setup instructions for the MINIS FORUM Mini PC, covering component upgrades like DDR5 memory and M.2 SSDs, OCulink adapter installation, and mounting procedures. It also includes the FCC compliance statement and manufacturer contact details.
	MINIS FORUM M1 Pro-285H Mini PC User Manual This user manual provides detailed information on the MINIS FORUM M1 Pro-285H Mini PC, covering its features, ports, package contents, setup instructions, and operation.
	MINIS FORUM New Gen Venus Series Computer User Manual Comprehensive user manual for the MINIS FORUM New Gen Venus Series Computer, covering product features, interfaces, installation procedures, safety precautions, maintenance guidelines, and troubleshooting FAQs.
	MINIS FORUM V3 3-in-1 Tablet User Manual and Quick Start Guide Official user manual and quick start guide for the MINIS FORUM V3 3-in-1 Tablet. Learn about setup, features like camera, fingerprint/face recognition, ports (USB-4, VLINK DP-in), power management, and troubleshooting.
	MINIS FORUM Mini PC User Manual and Setup Guide A comprehensive guide for setting up, installing, operating, and maintaining your MINIS FORUM Mini PC. Includes essential safety precautions, troubleshooting tips, and contact information.
	MINIS FORUM Mini PC User Manual and Installation Guide Official user manual and installation guide for the MINIS FORUM Mini PC. Learn about its features, ports (HDMI, USB4, DisplayPort, OCulink, RJ-45), package contents, how to install DDR5 memory and M.2 SSDs, and basic operation. Includes FCC compliance information and contact details.
	MINIS FORUM F1FXM Motherboard User Manual and Technical Specifications Comprehensive guide to the MINIS FORUM F1FXM motherboard, detailing its layout, CPU support, memory slots, expansion options (PCIe, M.2, SATA), connectivity ports (USB, HDMI, DisplayPort, LAN), and system panel headers. Includes package contents and contact information.
	Minisforum UM760 Mini PC User Manual User manual for the Minisforum UM760 Mini PC, detailing package contents, hardware overview, interface specifications, setup guide, DIY installation of RAM and SSD, and mounting instructions.