Installation manual

Important Information

IMPORTANT! Your Plasma, LCD, TV, Projector, Projector Screen or other HiFi equipment represents a considerable value. If screws are included they may not be suitable for the material of your wall, ceiling or floor. Replace the screws with suitable ones if needed. In case you are unsure regarding any aspects of the mounting of this product please consult a professional.

Product Specification

Product Dimensions & Articulation

Diagram illustrating the dimensions and articulation of the gas lift arm. It shows the arm extended, with measurements for reach (60mm, 200mm, 240mm from base), total height (525mm), and screen depth (170mm). The desk clamp mechanism is shown with a height of 75mm and a desk thickness range of 10-50mm. Separate views indicate articulation limits: ±90° tilt, ±5° swivel, and 180°/360° rotation.

Installation Methods

Desk Clamp Installation

Two diagrams illustrate desk clamp installation methods. The left diagram, labeled 'With open space behind', shows the clamp (A) attached to a desk edge, with a screw (d) being tightened. The right diagram, labeled 'With screen or other objects behind', shows the clamp (A) on a desk edge with a monitor behind it. A securing screw (e) is shown, requiring a minimum distance of 12mm from the screen or object. Both methods are suitable for desk thicknesses ranging from 10mm to 50mm.

Thru-Desk Installation

Diagram illustrating thru-desk installation. The clamp (A) is shown being secured through a desk using a bolt (b) and washer (c). The required hole size is a diameter of at least 8.5mm (≥Ø8.5mm). This method is suitable for desk thicknesses ranging from 10mm to 50mm.

Install Procedure

1. Step 1: Assembly of the base and arm components. Part C is attached to Part B, which is then mounted onto the base.
2. Step 2: Attaching the monitor mounting plate to the arm.
3. Step 3: Securing the monitor to the mounting plate using screws (g).
4. Step 4: Shows the fully assembled arm, highlighting adjustable joints (I, II, III). Sub-images demonstrate manual adjustment of joints I and II. A warning states: ⚠️ Attention: Rude dismantle isn't allowed!
5. Step 5: Illustrates the final arm setup with arrows indicating movement. A note advises to maintain an extra 40-50mm of slack in the arm's joints during setup for optimal movement.

Rotation Limit

Diagrams illustrating rotation limits. The first shows a 180° rotation limit for the arm. The second shows ±90° tilt and 180° rotation. The third shows another 180° rotation limit. These diagrams also reference components labeled f and B.

Adjustment Steps

1. Step 1: Adjusting the arm's tension. The 'Rotation force adjust' and 'Swivel force adjust' are modified using screws (e and d).
2. Step 2: Achieving optimal balance. The arm should be held horizontally before adjustment. The text advises to 'Try more to make above adjustment based on monitor weight to get best free-stop effect'.

Module List

Part List

Warranty Information

MULTIBRACKETS™ Limited Warranty covers defects in material and workmanship for the product's Warranty Period, commencing on the original purchase date. Coverage includes: Limited Lifetime Warranty for monitor mounts; Five (5) years for metal video monitor mounts, racks, and stands; Two (2) years for gaslifts and sit-stand workstations. Exclusions: Plastic speaker mounts, speaker stands, furniture, wood/MDF accessories. Outdoor use voids the warranty. This warranty is for the original purchaser and installation. To the maximum extent permitted by law, other warranties are disclaimed. MULTIBRACKETS will cover repair or replacement costs but is not liable for incidental, consequential, or indirect damages. MULTIBRACKETS™ Stockholm Sweden 2016. www.multibrackets.com

The content of this manual is subject to change without further notice. The latest version of this manual can be found online under the product name on the website: www.multibrackets.com