Installation Manual
M Monitormount Wall Basic Single
EAN: 7350105210013
Product Overview
This document provides installation instructions for the Multibrackets M Monitormount Wall Basic Single. The mount is designed for monitors and offers articulation for optimal viewing angles.
The manual is available in multiple languages, including English, Norwegian, Polish, Arabic, Czech, Danish, Portuguese, Latvian, Dutch, Estonian, Romanian, German, Greek, Spanish, Finnish, French, Hungarian, Italian, Japanese, Russian, Swedish, Slovak, Slovenian, Turkish, and Chinese.
Important Safety Notice
Important: Your monitor or HiFi equipment represents a considerable value. The screws provided may not be suitable for your wall, ceiling, or floor material. Always replace them with appropriate screws if necessary. If you are unsure about any aspect of the mounting process, please consult a professional.
Warranty Information
Multibrackets™ offers a Limited Warranty covering defects in material and workmanship.
- Warranty Periods:
- Five (5) years for metal video monitor mounts; all racks and non-electrical rack accessories.
- Two (2) years for gaslifts and sit-stand workstations.
- One (1) year for all motorized and/or automated products, plastic speaker mounts; all speaker stands; all furniture; all wood (MDF) accessories.
To make a warranty claim, create an RMA case on www.multibrackets.com/support. The warranty does not cover labor costs for removal and replacement. It is void if the product is modified, improperly installed, overloaded, misused, or used outdoors. Moving wall/ceiling mounts from their initial installation also voids the warranty.
Parts List
- A (x1): Wall plate
- B (x1): Arm assembly
- C (x1): Monitor bracket
- D (x3): Wall screws
- E (x1): Cable clip
- M-A (x4): M4x12 screws
- M-B (x4): M4x16 screws
- M-C (x4): M5x12 screws
- M-D (x4): M5x16 screws
- M-E (x4): M6x12 screws
- M-F (x4): M8x12 screws
- W-A (x3): Washers
- W-B (x3): Washers
- W-C (x3): Washers
Installation Steps
Step 1a: Wall Mounting Preparation
Attach the wall plate (A) to the wall using screws (D) and washers (W-A). Ensure the wall is structurally sound and suitable for the mount's weight capacity.
Diagram shows attaching the wall plate (A) to a wall, indicating the use of screws (D) and washers (W-A).Step 1b: Attaching Arm to Wall Plate
Attach the arm assembly (B) to the wall plate (A) using screws (M-A, M-C) and washers (W-C).
Diagram shows connecting the arm assembly (B) to the wall plate (A) using screws M-A, M-C, and washers W-C.Step 2: Securing Arm to Wall Plate
Secure the arm assembly (B) to the wall plate (A) using screws (D) and washers (W-B).
Diagram shows securing the arm assembly (B) to the wall plate (A) with screws D and washers W-B.Step 3a/3b: Attaching Monitor Bracket to Monitor
Select the appropriate screws and washers (e.g., M-A, M-C, M-E for 3a; M-B, M-D, M-F for 3b) to attach the monitor bracket (C) to the back of your monitor. Ensure the screws are the correct length for your monitor's VESA mounting holes and do not overtighten.
Diagrams 3a and 3b illustrate attaching the monitor bracket (C) to a monitor using various screw types (M-A to M-F) and washers. It emphasizes choosing the correct screw length.Step 4: Attaching Monitor to Arm
Slide the monitor, with the attached bracket (C), onto the arm assembly (B). Secure the monitor using the provided clips (E).
Diagram shows sliding the monitor assembly onto the arm and securing it with clips (E).Step 5: Cable Management and Final Adjustments
Route cables neatly along the arm using the cable clips (E). Perform final checks and adjust the monitor's tilt and swivel as needed for optimal viewing.
Diagram shows cable management with clips (E) and indicates final adjustments for tilt and swivel.
