M Menu Board Mount Pro Installation Manual
Models: MBC1X1U, MBC2X1U, MBC3X1U, MBC4X1U, MBC5X1UP, MBC6X1U VESA 200
EANs: 7350105212321, 7350073735655, 7350073735662, 7350073735679, 7350105215063, 7350105216398
Important Information and Warnings
Your display equipment represents a considerable value. If screws are included, they may not be suitable for your wall, ceiling, or floor material. Replace screws with suitable ones if needed. Consult a professional if unsure about any aspect of mounting.
⚠️ Warning! Always check the depth of the holes before starting an installation.
This product requires two people for installation. ??? 2 PERSONS RECOMMENDED
Product Dimensions and Specifications
The M Menu Board Mount Pro offers a total length of 4010mm [157.9"]; the main pole height is 120mm [4.7"] with a depth of 200mm [7.9"]. The adjustable height range is from 580mm (Min) to 750mm (Max). The mount supports tilt adjustments of 0°, 5°, 10°, and 15° upwards, and -6° downwards. The pole diameter is Ø8.5mm [0.3"].
Component Checklist
| Part | Description | Quantity |
|---|---|---|
| A1 | M5x15 Screw | X4 |
| A2 | M6x15 Screw | X4 |
| A3 | M8x25 Screw | X4 |
| A4 | Ø16x6.2x1.5 Washer | X4 |
| A5 | M8x45 Screw | X4 |
| A6 | Ø16x8.2x1.5 Washer | X4 |
| A7 | Ø13x8.2x13 Washer | X6 |
| B1 | Open-wrench | X1 |
| B2 | 3mm Allen Key | X1 |
| B3 | 5mm Allen Key | X1 |
| B4 | 6mm Allen Key | X1 |
| B5 | M8x10 Screw | X1 |
| B6 | M8x70 Screw | X12 |
| C1 | M8x60 Screw | X1 |
| C2 | Ø16x8.2x1.5 Washer | X1 |
| C3 | M8 Anchor | X12 |
| C4 | Lag Bolt | X12 |
| C5 | M8x10 Screw | X6 |
| C6 | M8 Anchor | X6 |
| D1 | M5x8 Screw | X3 |
| D2 | Mounting Arm | X6 |
| D3 | 800mm Rail Section | X3 |
| D4 | 1000mm Rail Section | X4 |
| D5 | 200T Connector | X3 |
| D6 | Locking Pin | X12 |
| D7 | Screw | X2 |
| D8 | Screw | X3 |
| D9 | Locking Pin | X12 |
| D10 | Screw | X12 |
Installation Steps
Step 1: Assemble Mounting Plate
Attach bracket B1 to the main mounting plate using screws C4, C2, C3, and C1. Ensure correct orientation.
Step 2: Mount to Wall/Ceiling
For Brick or Concrete: Drill holes and secure the mounting plate using anchors C6 and screws C1, C2, C5, B4.
For Wood: Secure the mounting plate using screws C5 and B4. Ensure the wood structure is suitable.
Step 3: Attach Mounting Arms
Slide the mounting arms (D2) onto the main pole and secure them.
Step 4: Attach Horizontal Rails
Attach the horizontal rail sections (D3, D4) to the mounting arms using part B6.
Step 5: Insert Locking Pins
Insert locking pins D9 into the rail slots.
Step 6: Connect Rail Sections
Connect the horizontal rail sections together.
Step 7: Lock Rails
Securely lock the connected rail sections in place.
Step 8: Attach Support Brackets
Attach support brackets B6 to the rails at 480mm and 1000mm intervals using screws D7.
Step 9: Secure Rails
Ensure the rails are properly aligned and secure them with screws D7.
Step 10: Mount Main Arms to Rails
Attach the main mounting arms to the assembled rail system. Use part B5 for adjustment.
Step 11: Mount Display Adapters
Attach the display adapter plates to the main mounting arms.
Step 12: Connect Pole Assembly to Adapters
Connect the main pole assembly to the display adapter assembly using parts B1, C4, D8, C3, and B4.
Step 13: Attach Display to Adapters
Attach the display to the adapter plates using parts A4, A1/A2/A3, B, A7, A6, A5. Note: For screens with a hole pattern in a pocket, spacers go between the Assembly Adapter Plate and the screen.
Step 14: Connect Display Assembly to Pole
Connect the display assembly to the main pole structure.
Step 15: Adjust Height and Tilt
Adjust the height of the display along the pole using the Allen Key (10mm). Adjust tilt angles (0°, 5°, 10°, 15° upwards, and -6° downwards) using the Allen Key.
Warranty Information
Multibrackets offers a limited warranty on its products. The warranty period varies by product type: 5 years for metal mounts, racks, and accessories; 2 years for gaslifts and workstations; 1 year for motorized products, plastic mounts, stands, furniture, and wood accessories. For warranty claims, create an RMA case on www.multibrackets.com/support. The warranty covers defective parts but not removal or replacement labor costs. It is void if the product is modified, improperly installed, overloaded, misused, or used outdoors. Moving wall/ceiling mounts from their initial installation also voids the warranty. Multibrackets disclaims other warranties and is not liable for incidental or consequential damages.
multibrackets.com
