Installation Manual

Important Safety Information & Warnings

WARNING!

Always check the depth of the holes before starting an installation.

IMPORTANT!

Your Plasma, LCD, TV, Projector, Projector Screen or other HiFi equipment represents a considerable value. If screws are included they may not be suitable for the material of your wall, ceiling or floor. Replace the screws with suitable ones if needed. In case you are unsure regarding any aspects of the mounting of this product please consult a professional.

This important safety warning is reiterated in multiple languages throughout the document.

CAUTION

Two persons recommended to install this product ⚠️

Parts List

VESA Overview

This wall mount is compatible with various VESA mounting patterns. The dimensions indicate the range of hole spacing it can accommodate:

• Width: 850mm (minimum 200mm - maximum 800mm)
• Height: 240mm (minimum 200mm - maximum 600mm)

Another configuration supports:

• Width: maximum 1335mm (minimum 200mm - maximum 1200mm)
• Height: 240mm (minimum 200mm - maximum 800mm)

Installation Steps

Step 1: Attach Brackets to TV

Attach the 'Bracket R' (Right) and 'Bracket L' (Left) to the back of your television. Use screws (A-G) and washers (I/J) as appropriate for your TV's VESA mounting holes. Note: Some screws (H) and washers (I/J) are optional or specific to certain screw sizes (M5/M6).

Visual Description: The process involves sliding small mounting plates onto the vertical brackets and securing them. Ensure the brackets are oriented correctly for your TV.

Step 2a: Mount Wall Plate to Wall (Using Screws)

Preparation: Mark the desired location for the wall plate on the wall. Ensure the plate is level. ⚠️

Drilling: Drill holes into the wall. The recommended depth is 80mm, using a 5.5mm drill bit. ?️

Attachment: Secure the wall plate to the wall using screws (M) and washers (L). ✔️

Visual Description: The diagram shows marking points on the wall, drilling, and then attaching the wall plate using screws and washers.

Step 2b: Mount Wall Plate to Wall (Using Anchors)

Preparation: Mark the desired location for the wall plate on the wall. Ensure the plate is level. ⚠️

Drilling: Drill holes into the wall. The recommended depth is 80mm, using a 10mm drill bit. ?️

Attachment: Insert anchors (N) into the drilled holes. Secure the wall plate to the wall using screws (M) and washers (L). ✔️

Visual Description: Similar to 2a, but shows the use of anchors (N) for wall mounting.

Step 3: Attach TV to Wall Plate

Lift the TV with the attached brackets and hook the top of the brackets onto the wall plate. Push the bottom of the brackets to securely lock them onto the plate. ?

Visual Description: The TV with brackets is shown being lifted and attached to the wall plate, with close-ups showing the locking mechanism engaging.

Step 4: Secure and Level TV

Use the provided Allen key (K) to tighten the securing screws that lock the TV brackets to the wall plate. Use a level to ensure the TV is mounted straight before fully tightening. ?

Visual Description: The Allen key is used to tighten fasteners, and a spirit level is placed on the TV to check its alignment.

Step 5: Adjust Tilt Angle

The mount allows for tilt adjustment. Adjust the angle of the TV as desired, within the range of +10° to -10°. ⬆️⬇️

Visual Description: A close-up shows the tilt adjustment mechanism, with arrows indicating the direction of movement for tilting.

Step 6: Final Securing

Ensure all locking mechanisms are engaged and the TV is securely mounted to the wall plate. ✔️

Visual Description: Final check of the mounted TV, showing the locking mechanism engaged.

Warranty Information

MULTIBRACKETS™ warrants its products to be free of defects in material and workmanship for the product's Warranty Period, commencing on the original purchase date.

• Five (5) years: Metal video monitor mounts; all racks and non-electrical rack accessories.
• Two (2) years: Gaslifts and sit-stand workstations.
• One (1) year: Motorized/automated products, plastic speaker mounts, speaker stands, furniture, wood (MDF) accessories.

For warranty claims, create an RMA case on www.multibrackets.com/support. MULTIBRACKETS will replace defective parts free of charge after verification. This warranty does not cover labor costs for removal/replacement. It is void if the product is modified, improperly installed, overloaded, or misused. Outdoor use voids the warranty. Moving a wall/ceiling mount from its initial installation also voids the warranty. To the maximum extent permitted by law, MULTIBRACKETS disclaims other warranties and liability for damages.

The content of this manual is subject to change without notice. The latest version can be found online at www.multibrackets.com.