Tiara 2 LED Luminaire

Important Safety and Installation Notes

Assembly should be carried out by a qualified person.

Cleaning: Dirtiness on the diffuser due to normal operation should be cleaned with a damp cloth. Do not use abrasive cleaners.

Waste Electrical and Electronic Equipment (WEEE) Directive

This product is marked in accordance with the European Directive 2002/96/CE and Polish Law on used electric and electronic equipment with the symbol of a crossed-out waste container (♻️). This indicates that the device, after its service life, cannot be disposed of with other household waste. The user is obliged to return it to entities collecting used electric and electronic equipment. Proper handling contributes to avoiding harmful consequences for human health and the environment.

Date of Issue: 14.02.2023

Index: UL00942

Installation Procedure

Step 1: Power Off

Ensure the power is turned off before proceeding. [Power Off Symbol] ?⚡️

Step 2: Luminaire Opening and Wiring Preparation

Open the luminaire. Prepare wiring, noting the types of cables required (e.g., H07 RN-F 3x1.5mm², H07 RN-F 5x1.5mm² for DALI, H07 RN-F 2x1.5mm², H07 RN-F 4x1.5mm² for DALI). Ensure cable glands accommodate the cable diameter (e.g., Ø 9-12 mm).

Step 3: Accessing Internal Components

Open the luminaire cover by pressing the release mechanisms. [Open Button] ➡️ [Push Button]

Step 4: Wiring Connections

Connect the power supply and control wiring. Diagrams show standard connections (L, N, PE) and DALI connections (DA, DA, X, N, L). Ensure connections are secure.

Step 5: Securing Cables

Use cable glands to secure the cables. The diagrams illustrate connecting wires with specific lengths (e.g., 7mm exposed wire) and using silicone tubes.

Step 6: Internal Wiring

Connect the internal wiring of the luminaire. This step is shown with multiple connections (x2).

Step 7: Final Wiring and Sealing

Complete all wiring connections for both standard and DALI configurations. Ensure all connections are properly sealed and secured.

Step 8: Mounting and Tightening

Mount the luminaire. Tighten screws to a torque of 6 Nm. [Torque Symbol] 6 Nm ?

Step 9: Closing the Luminaire

Close the luminaire cover securely. [Close Button] ➡️ [Click Sound Symbol] CLICK!

Step 10: Final Connections

Make final electrical connections (x2).

Step 11: Pole Mounting

Mount the luminaire onto poles with diameters up to 60mm or 76mm.

Step 12: Angle Adjustment

Adjust the luminaire's angle. The minimum/maximum angle can be set from +30° to -30° for both horizontal arm and vertical pole mounting.

Step 13: Maximum Height Consideration

Consider the maximum installation height, which is up to 15 meters, as depicted in a road scene illustration.

Step 14: Power On

Once installation is complete and verified, turn the power on. [Power On Symbol] ?⚡️

Technical Specifications and Dimensions

Model M Dimensions

Length: 706 mm, Width: 214 mm, Height: 105 mm. Surface area: 0.028 m². Weight: 5.2 kg. Luminous flux area: 0.13 m². Pole mounting diameter: Ø 76mm or Ø 64mm.

Model S Dimensions

Length: 533 mm, Width: 214 mm, Height: 105 mm. Surface area: 0.021 m². Weight: 4.4 kg. Luminous flux area: 0.1 m². Pole mounting diameter: Ø 76mm or Ø 64mm.

Sensor Mounting

Instructions for screwing a NEMA/ZHAGA sensor into the luminaire are provided, showing the NEMA/ZHAGA socket.

Light Source Information

The light source in this luminaire is non-replaceable by the user. It shall only be replaced by the manufacturer, their service agent, or a similarly qualified person.

Contact Information

Lena Lighting S.A.

ul. Kornicka 52, 63-000 Sroda Wlkp., POLAND

Tel: +48 61 28 60 300

Email: office@lenalighting.pl

Website: www.lenalighting.pl