ASSEMBLY INSTRUCTIONS

General Information

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment.

NOTICE

• Always use proper tools.
• Follow the assembly steps in order. Do not skip any steps.
• Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
• Keep the instructions for future reference.
• Check to ensure all "PARTS" and "HARDWARE" quantities, as noted, prior to commencement of assembly.
• Place all furniture parts on a clean and flat soft surface to prevent any scratches.
• Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
• If you need any assistance with your new item or if you are missing any parts, please email us your inquiries. We will be happy to assist and walk you through your assembly process.
• Since the dimensions of our products are manually measured, there may be an error of ± 0.79 inch between the real product and the measurement data. The measurement data is for reference only.

MADE IN CHINA

Parts List

Hardware List

Step 1

Attach part 2 to part 1. Use hardware: B (x2), C (x4), D (x2).

[Diagram: Part 2 connects to Part 1 using hardware B (x2), C (x4), D (x2).]

Step 2

Attach drawer supports (part 4) to the assembled frame. Use hardware: C (x12), D (x12), I (x6), G (x6).

[Diagram: The frame with supports is shown being attached at four corners using the specified hardware. Close-ups show specific connection points.]

Step 3

Assemble the wheel mechanism. Attach wheels (M) to the supports using hardware L (x4) and N (x4). Repeat for all four supports.

[Diagram: A support with a wheel is shown being attached using screws and nuts. Arrows indicate the direction of assembly.]

Step 4

Attach drawer slide mechanisms (part 4) to the drawer components (part 3). Use hardware A (x8). Repeat for both drawers.

[Diagram: A drawer component is shown with two drawer slide mechanisms being attached using screws.]

Step 5

Attach drawer slide mechanisms (part 4) to the main frame. Use hardware N (x4).

[Diagram: The main frame is shown with drawer slide mechanisms being attached at specific points.]

Step 6

Attach drawer slide mechanisms (part 4) to the main frame. Use hardware A (x4) and K (x1).

[Diagram: The main frame is shown with drawer slide mechanisms being attached using screws and a connecting plate.]

Step 7

Insert the drawer units (part 3) into the assembled frame. Attach armrests (part 7) and drawer slide mechanisms (part 8). Arrows indicate insertion direction.

[Diagram: The drawer units are shown being slid into place, and armrests are shown being attached to the sides of the frame.]

Step 8

Secure the armrests (part 7) to the frame. Use hardware: A (x4), E (x2).

[Diagram: A close-up view shows armrests being secured with screws and brackets.]

Step 9

Attach the backrest (part 5) and armrest (part 6) to the frame. Use hardware: C (x4), D (x2), H (x2).

[Diagram: The backrest and one armrest are shown being attached to the main structure. Hardware is indicated.]

Step 10

Attach the second backrest component (part 6) to the frame. Arrows indicate insertion direction.

[Diagram: The second backrest component is shown being placed onto the frame.]

Step 11

Place the cushions (part 9, 10) and pillows (part 11) onto the assembled sofa bed. Arrows indicate placement direction.

[Diagram: The cushions and pillows are shown being placed onto the sofa bed structure.]