66" Wide Convertible Sofa Bed with Side Storage
Thank you for purchasing this quality product. Please check all packing material carefully for small parts that may have come loose inside the carton during shipment.
DO NOT RETURN TO THE STORE!
If parts are missing or damaged, we will gladly ship your replacements parts free of charge.
CAUTION: Do not fully tighten bolts/nuts until the product is fully assembled. Keep all hardware out of reach of children.
Assembly Notice
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep these instructions for future reference.
- Check to ensure all "PARTS" and "HARDWARE" quantities match the enclosed list prior to commencement of assembly.
- Place all furniture parts on a clean and flat soft surface to prevent any scratches.
- Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
- Since the dimensions of our products are manually measured, there may be an error of ± 0.79 inch between the real product and the measurement data. The measurement data is for reference only.
Parts List
- Part 1: Bed Frame Base (1 PC)
- Part 2: Bed Frame Top (1 PC)
- Part 3: Drawer Unit (2 PCS)
- Part 4: Drawer Support Bracket (4 PCS)
- Part 5: Backrest Panel (1 PC)
- Part 6: Armrest Panel (1 PC)
- Part 7: Side Storage Unit (1 PC)
- Part 8: Back Support Bracket (1 PC)
- Part 9: Seat Cushion (1 PC)
- Part 10: Mattress (1 PC)
- Part 11: Back Cushions (2 PCS)
Hardware List
- A: M8x20 Screw (16 PCS)
- B: M8x55 Screw (2 PCS)
- C: M8 Washer (22 PCS)
- D: M8 Nut (17 PCS)
- E: Bracket Plate (2 PCS)
- F: Support Bar (1 PC)
- G: Hinge Bracket (6 PCS)
- H: M8x80 Screw (2 PCS)
- I: M8x30 Screw (12 PCS)
- J: Wrench (1 PC)
- K: Connecting Plate (1 PC)
- L: M6 Nut (4 PCS)
- M: Wheel (4 PCS)
- N: M6x35 Screw (8 PCS)
Assembly Steps
Step 1
Attach Part 1 (Bed Frame Base) to Part 2 (Bed Frame Top) using 2x Hardware B (M8x55 screws), 4x Hardware C (M8 washers), and 2x Hardware D (M8 nuts).
Step 2
Attach support brackets (Part 4) to the assembled frame. Use 12x Hardware C (M8 washers), 12x Hardware D (M8 nuts), 6x Hardware I (M8x30 screws), and 6x Hardware G (hinge brackets).
Step 3
Attach wheels (Part M) to the support brackets. Use 4x Hardware L (M6 nuts) and 4x Hardware N (M6x35 screws).
Step 4
Attach drawer support brackets (Part 4) to the drawer units (Part 3). Use 8x Hardware A (M8x20 screws).
Step 5
Insert the drawer units (Part 3) into the frame. Secure them using 4x Hardware N (M6x35 screws).
Step 6
Attach the back support bracket (Part 8) to the frame. Use 4x Hardware A (M8x20 screws) and 1x Hardware K (connecting plate).
Step 7
Slide the side storage unit (Part 7) onto the frame. Insert the backrest panel (Part 5) into the designated slots.
Step 8
Attach the backrest panel (Part 5) to the frame using 4x Hardware A (M8x20 screws) and 2x Hardware E (bracket plates).
Step 9
Attach armrest panels (Part 6) to the frame. Use 4x Hardware C (M8 washers), 2x Hardware D (M8 nuts), and 2x Hardware H (M8x80 screws).
Step 10
Slide the backrest panel (Part 5) into place.
Step 11
Place the seat cushion (Part 9) and mattress (Part 10) onto the frame. Place the back cushions (Part 11) against the backrest.
