Victrola Montauk VM-135 Turntable

Turntable Layout

The Victrola Montauk VM-135 features a well-organized layout for easy operation. Below is a description of the key components:

Main Unit Components:

• 1. 45 RPM Adaptor: Used for playing 45 RPM records with large center holes.
• 2. Lift Lever: Raises and lowers the tone arm.
• 3. Auto Stop Control Switch: Controls whether the turntable stops automatically at the end of a record.
• 4. Speed Selection Switch: Allows selection of playback speeds (33, 45, 78 RPM).
• 5. Tone Arm: Holds the stylus and plays the record.
• 6. Tone Arm Lock: Secures the tone arm when not in use.
• 7. Phono Stylus Cartridge: The component that reads the grooves on the record.
• 8. Power/Volume Knob: Turns the unit on/off and adjusts the volume.
• 9. Power LED Light Indicator: Shows the power status of the unit.
• 10. Turntable Shaft: The spindle on which the record platter sits.
• 11. Turntable Platter: The rotating disc where the record is placed.
• 12. Removable Dust Cover: Protects the turntable from dust.
• 13. Hinge: Connects the dust cover to the main unit.
• 14. Power Adaptor Jack: Port for connecting the AC/DC power adapter.
• 15. External Speaker Jacks: Connectors for external speakers.
• 16. Aux In Jack: Input for connecting external audio devices via a 3.5mm cable.

External Speaker Components:

• 17. External Speakers: The included wooden speakers.
• 18. Speaker Cable at External Speaker: The cable connecting the speaker to the main unit.

Turntable Operation

Setup

An AC/DC adaptor (12V DC 2.0A) is included for powering the unit. Connect the included wooden speakers using the color-coded cables (red to red, white to white) to the corresponding jacks on the back of the unit.

Firmly insert the DC plug of the adapter into the DC IN jack on the unit. Plug the AC adapter into a power outlet (220-240V AC ~ 50 Hz). Turn on the unit using the POWER/VOLUME knob. The Power LED Light Indicator will illuminate.

Note: To prevent feedback or 'Larsen effect' noise, place speakers at least 60 cm (approx. 2 feet) away from the turntable. Keep the dust cover open when playing records at higher volumes.

Listening to a Record

1. Raise the dust cover.
2. Turn on the unit using the POWER/VOLUME knob. The Power LED Light Indicator will turn RED.
3. Place a record on the turntable platter and set the Speed Selection Switch (4) to match the record's speed (33, 45, or 78 RPM).
4. For 45 RPM singles or records with large center holes, use the 45 RPM adaptor.
5. Remove the protective cover from the stylus cartridge.
6. Unlock the tone arm lock. Push the Lift Lever (2) backward to gently raise the tone arm.
7. Carefully move the tone arm to the desired position over the record. The turntable platter will begin to rotate if the Auto Stop Control Switch (3) is set to ON.
8. Gently lower the tone arm onto the record by pushing the Lift Lever (2) forward. The vinyl record will begin to play.

If the Auto Stop Control Switch (3) is ON, the record will stop automatically when finished. If it is OFF, you will need to manually lift the tone arm using the Lift Lever (2) and return it to the rest, then turn off the power.

Note on Auto Stop: The AUTO STOP function works with most 33RPM records. For some vinyl records, it may stop before the end or not stop at all. If a record stops prematurely, set the AUTO STOP switch to OFF. You will then need to stop the turntable manually. AUTO STOP may engage before the end of a record depending on its length; do not rely solely on this feature to end playback.

Note on Standby: The unit features automatic standby for power saving (CE regulation). If no audio signal is detected (from record or Bluetooth) for approximately 15 minutes, the unit will enter standby mode. To reactivate, either move the tone arm to start playing a record or turn the POWER/VOLUME knob OFF and then ON again.

Stylus Replacement

Replacing the stylus is a straightforward process:

Removing the Stylus:

1. Place fingers at the tip of the stylus and push down towards direction "A" (WARNING: Applying excessive force may damage or break the cartridge).
2. Pull the stylus out towards direction "B".

Installing the Stylus:

Use a replacement stylus (e.g., # ITNP-S1).

1. Hold the tip of the new stylus and insert the other edge by pressing towards direction "C".
2. Push the stylus up towards direction "D" until it locks into place at the tip.

CAUTION: Do not bend or force the stylus into the cartridge. Avoid touching the stylus needle to prevent injury. Always turn off the unit's power before replacing the stylus. Keep styluses out of reach of children.

Note: The stylus typically lasts about 300 hours of normal use. Replace it when sound quality degrades. 78 RPM records may cause faster stylus wear.

Bluetooth Operation

Connect external devices like smartphones or tablets wirelessly via Bluetooth.

1. Turn on the unit using the POWER/VOLUME knob.
2. When the turntable is on and the tone arm is on its rest, Bluetooth mode activates automatically and enters pairing mode (LED light flashes).
3. For the first connection, you will need to pair your Bluetooth device with the turntable.
4. Turn ON the Bluetooth setting on your external device. Wait a moment, then search for the Bluetooth pairing name “Victrola Montauk". If prompted for a password, enter "0000".
5. Select “Victrola Montauk” to connect. The LED light will stop flashing once connected.
6. You are now connected to your external device via Bluetooth.
7. Use the POWER/VOLUME knob to adjust the sound level, and also adjust the volume on your external audio device.

Aux-in Operation

Connect external audio devices using a 3.5mm stereo cable (not included).

1. Connect the external audio device to the AUX IN socket on the back of the unit using a 3.5mm stereo cable.
2. Turn on the unit and adjust the volume to an appropriate level using the POWER/VOLUME knob.
3. Use the POWER/VOLUME knob to adjust the overall volume. Control playback and volume on the external audio device itself.

Note: When an AUX cable is connected, the unit defaults to AUX mode. To listen to records or Bluetooth audio, unplug the AUX cable.

Specifications

General

Bluetooth

Turntable

Included

Turntable, Instruction Manual, Turntable Operation Sheet, Power supply, 45 RPM adapter.

Design and specification are subject to change without notice.

Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. Victrola is a registered trademark of Innovative Technology Electronics LLC. Made in China.

Safety Instructions

Please read this instruction manual carefully before use and keep it for future reference.

• Do not cover or block ventilation openings. Leave 5 cm (2 inches) of free space around the device.
• Install in accordance with the supplied user manual.
• Keep the device away from heat sources (radiators, heaters, stoves, candles) and naked flames. Use only in moderate climates (0° to 35° C).
• Avoid strong magnetic fields.
• Electrostatic discharge may disturb normal usage; reset and restart the device if this occurs. Handle with care in static-free environments during file transmission.
• Warning: Never insert objects into the product through vents or openings, as this can cause electric shock or short circuits. Do not spill water or liquids on the product.
• Do not use in wet or moist areas (bathrooms, steamy kitchens) or near swimming pools.
• The device shall not be exposed to dripping or splashing. Do not place liquid-filled objects (like vases) on or near the apparatus.
• Do not use the device when condensation may occur. If condensation forms inside, turn the unit OFF for 1-2 hours to dry before powering on.
• If you notice smoke, excessive heat, or other unexpected phenomena, immediately disconnect the power plug.
• Use only the specified power source (refer to the specification label). Consult your dealer or local power company if unsure.
• Keep away from animals, as they may bite power cords.
• To clean, use a soft dry cloth. Do not use solvents or petrol-based fluids. For tough stains, use a damp cloth with dilute detergent.
• The supplier is not responsible for damage or data loss due to malfunction, misuse, modification, or battery replacement.
• Do not interrupt connections during formatting or file transfer to avoid data corruption.
• The rating label is located on the bottom or back panel.
• This device is not intended for use by persons with physical, sensory, or mental disabilities, or lack of experience/knowledge, unless supervised or instructed by a responsible person.
• This product is for non-professional and non-commercial use only.
• Ensure the unit is placed on a stable position. Damage from unstable positions, vibrations, shocks, or failure to follow warnings is not covered by warranty.
• Never remove the casing of this device.
• Never place this device on other electrical equipment.
• Do not allow children access to plastic bags.
• Only use attachments/accessories specified by the manufacturer.
• Refer all servicing to qualified service personnel. Servicing is required for damage (cord, plug, liquid spills, dropped items, exposure to rain/moisture, abnormal operation).
• Prolonged exposure to loud sounds may lead to temporary or permanent hearing loss.
• When handling the power cable or AC power adapter: disconnect in case of trouble, refer servicing to qualified personnel. Do not step on or pinch the adapter. Be careful near plugs and cable exits. Do not place heavy items on the adapter. Keep the device out of children's reach.
• Unplug during lightning storms or when unused for long periods. Ensure the socket outlet is near the equipment and easily accessible.
• Do not overload AC outlets or extension cords; this can cause fire or electric shock.
• Class 1 construction devices must connect to a main socket outlet with protective earthing. Class 2 construction devices do not require earthing.
• Always hold the plug when disconnecting from the socket outlet; do not pull the power cord.
• Do not use a damaged power cord, plug, or loose outlet, as this may result in fire or electric shock.

Regulatory Information

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. There's no guarantee interference won't occur in a specific installation. If interference occurs, users are encouraged to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and the receiver.
• Connecting the equipment to an outlet on a circuit different from the receiver's.
• Consulting the dealer or an experienced radio/TV technician.

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

IC STATEMENT

This device complies with Industry Canada's license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.

French translation: Cet appareil se conforme à RSS247 de Canada d'Industrie. Cet appareil se conforme à RSS247 de Canada d'Industrie. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable.

The device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with IC radiation exposure limits set forth for an uncontrolled environment. Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC établies pour un incontrôlé environnement.

The device should be installed and operated with a minimum distance of 20cm between the radiator and your body. L'appareil doit être installé et utilisé avec une distance minimale de 20cm entre le radiateu et votre corps.

Warranty

United States

Victrola (Innovative Technology Electronics, LLC) warrants this product to be free from defective materials and workmanship for one (1) year from the date of purchase, subject to limitations. Warranty period is not extended if the product is replaced.

To obtain service, contact the dealer where purchased with your original receipt. If dealer assistance is impossible, contact Victrola customer service at victrola.com/contact.

If the product proves defective within one year, Victrola will replace it at no charge. If the model is unavailable, Victrola may issue a merchandise credit for the purchase price redeemable at victrola.com.

Limitations:

• Does not cover improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or normal wear and tear.
• Does not cover cosmetic damage (e.g., paint damage) or consequential damage to other components or premises.
• Null and void if not used per Victrola's instructions.
• Terminates if the original purchaser sells or transfers the product.
• Null and void for defects caused by unauthorized installation or repair.

This warranty grants specific legal rights, which may vary by state/jurisdiction/country. Implied warranties (merchantability, fitness for a particular purpose) are limited to this warranty's term. Some jurisdictions do not allow exclusions or limitations on implied warranties, so these may not apply.

Victrola's liability for malfunctions is limited to replacement or repair. Victrola is not liable for special, punitive, consequential, or incidental damages, including third-party claims or unavailability of products. Maximum liability is the product's purchase price. Some jurisdictions do not allow exclusions of consequential damages, so these limitations may not apply.

Canada and US Territories

Warranty complies with applicable law for sales in Canada or US Territories. For service, contact the dealer or distributor with your original receipt. If dealer assistance is impossible, contact Victrola customer service at victrola.com/contact.

If defective, Victrola will replace the product at no charge. If the model is unavailable or unrepairable, Victrola may replace it with a current model of equal or greater value.

Outside the U.S, Canada, and US Territories

Warranty complies with applicable law for sales outside these regions. For service, contact the dealer or distributor with your original receipt.