Victrola Stream VPT-2000 Instruction Manual

Turntable Overview

Top View

The top view of the turntable shows the following components:

• Speed Selector: Used to choose the playback speed.
• Slipmat: A mat placed on the platter to protect records and reduce static.
• Platter: The rotating disc that holds the record.
• Moving Magnet Cartridge: Located at the end of the tonearm, it reads the grooves of the record.
• 45 RPM Adaptor: A small disc to play 45 RPM records with a larger hole.
• Counter Weight: Adjusts the tracking force on the stylus.
• Anti-Skate Knob: Counteracts the inward pull on the tonearm caused by friction.
• Tonearm Lift Lever: Manually raises or lowers the tonearm.
• Tonearm Holder: Secures the tonearm when not in use.
• Tonearm: The arm that holds the cartridge and tracks the record groove.
• Removable Headshell: The part of the tonearm that holds the cartridge.
• Control Knob: Likely for power or volume control.

Back View

The back view of the turntable shows the following connections and features:

• Dust Cover: A protective cover for the turntable.
• RCA Output: Connects to amplifiers or powered speakers.
• Ethernet Port: For network connectivity.
• AC Power Port: Connects to the power adapter.

Parts Included

The following parts are included with the Victrola Stream VPT-2000:

• Turntable unit
• Dust Cover
• Power Cord
• 45 RPM Adaptor
• Counter Weight
• Removable Headshell
• Platter
• Silicone Slipmat

Specifications

App Download & Unit Setup

Download the Victrola Stream app to follow simple setup steps and connect your turntable to your Sonos system.

Available on the Apple App Store and Google Play Store.

Customer Support

For user guides, assembly, FAQs, troubleshooting, and general support, please visit:

• User Guide / Assembly: stream.victrola.com/guide
• FAQ / Troubleshooting: stream.victrola.com/faq
• Support: stream.victrola.com/support

Phone: 1 (877) 553-6079

Email: victrolastream@victrola.com

You can scan a QR code for easy access to the complete support page.

Warnings and Safety Information

Important Safety Instructions

1. Read all safety and operating instructions before use.
2. Keep instructions for future reference.
3. Heed all warnings on the appliance and in instructions.
4. Follow all operating and use instructions.
5. Do not use near water or moisture (e.g., wet basement, swimming pool).
6. Clean only with a dry cloth.
7. Do not block ventilation openings; install per manufacturer's instructions.
8. Do not install near heat sources (radiators, stoves, amplifiers).
9. Protect the power cord from being walked on or pinched.
10. Only use manufacturer-specified attachments/accessories.
11. Use only with specified carts, stands, tripods, brackets, or tables. Use caution when moving combinations to avoid tip-over.
12. Unplug during lightning storms or long periods of non-use.
13. Refer all servicing to qualified personnel. Servicing is required for damage (cord, plug, liquid spill, dropped items, exposure to rain/moisture, abnormal operation).
14. CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
15. The lightning flash with arrowhead symbol [⚡] indicates the presence of non-insulated "dangerous voltage" posing a risk of electric shock.
16. Warning: Do not remove covers; no user-serviceable parts inside. Refer servicing to qualified personnel.
17. The exclamation point within a triangle symbol [❗] alerts to important operating and maintenance instructions.
18. This equipment is Class II or double insulated and does not require an earth connection.
19. The mains plug serves as the disconnect device and must remain operable.
20. WARNING: Do not expose to rain or moisture. Do not place liquid-filled objects on the apparatus.
21. Use in moderate climate.
22. Refer to bottom/back enclosure for electrical and safety information before installation/operation.
23. Do not impede ventilation with items like newspaper or curtains.
24. No naked flame sources (e.g., candles) on the apparatus.
25. Do not install in confined spaces (e.g., bookcases).

Safety Information

1. To shut off power completely, unplug the power cord from the wall outlet. Unplug if not using for extended periods.
2. Using controls or procedures other than specified may result in hazardous radiation exposure.
3. To prevent electric shock, match the wide blade of the plug to the wide slot and insert fully.
4. If problems occur, contact qualified service centers; do not use in defective states.

Before Use

1. Choose installation location carefully: avoid direct sunlight, heat sources, vibrations, excessive dust, cold, or moisture. Keep away from humming sources like transformers or motors.
2. Do not open the cabinet to avoid damage or shock. Contact Customer Service if a foreign object enters the set.
3. Handle records with clean fingers. Never play cracked records.
4. When unplugging, pull the plug directly, not the cord.
5. Protect the stylus by replacing the protective needle cover after use.
6. Do not clean with chemical solvents; use a clean, dry cloth.
7. Keep this manual in a safe place for future reference.

FCC & IC Warnings

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with Class B digital device limits per FCC Rules, designed for reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If not installed/used per instructions, it may cause harmful interference to radio communications. No guarantee of no interference in a particular installation. If interference occurs, try measures like: reorienting/relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

WARNING: Unauthorized modifications may void the user's authority to operate this equipment.

The device must not be co-located or operating with any other antenna or transmitter. Maintain compliance with FCC RF exposure guidelines by placing the product at least 20cm from nearby persons.

Déclaration d'IC sur l'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre l'antenne et votre corps. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.

This device complies with RSS247 of Industry Canada. Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

FCC & IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warranty

Victrola is a registered trademark of Innovative Technology Electronics, LLC.

United States

Victrola warrants to the original retail purchaser that this product will be free from defective materials and workmanship for two (2) years from the date of purchase, subject to limitations. Warranty period is not extended if the product is replaced.

To obtain replacement, contact the dealer with the original receipt. If dealer assistance is impossible, contact customer service at stream.victrola.com/support.

If defective within two years, Victrola will replace the product at no charge. If the model is unavailable, Victrola may issue a merchandise credit for the purchase price.

Limitations:

• Does not cover failure from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or wear from ordinary use or environmental deterioration.
• Does not cover cosmetic damage (paint damage) or consequential damage to other components or premises.
• Null and void for products not used per Victrola's instructions.
• Terminates if the original purchaser sells or transfers the product.
• Null and void for defects/damage from installation or repair by unauthorized personnel.

Victrola's warranty extends only to products purchased from authorized sellers. It does not cover products from unauthorized sellers or those purchased as repaired or refurbished.

This warranty grants specific legal rights, which may vary by state, jurisdiction, or country. Implied warranties are limited to the term of this warranty. Some jurisdictions may not allow exclusions or limitations on implied warranties.

Victrola's responsibility for malfunctions is limited to replacement or repair. Victrola is not liable for special, punitive, consequential, or incidental damages or losses. Maximum liability is limited to the product's purchase price.

Canada and US Territories

Warranty complies with applicable law for sales in Canada or US Territories. Contact the dealer or distributor with the original receipt for service. If dealer assistance is impossible, contact customer service at stream.victrola.com/support.

If defective, Victrola will replace the product at no charge. If the model is unavailable, Victrola may replace it with a current model of equal or greater value.

Outside the U.S, Canada, and US Territories

Warranty complies with applicable law for sales outside these regions. Contact the dealer or distributor with the original receipt for service.